{"title":"500-Series Mic Pre's","description":"","products":[{"product_id":"a-designs-p-1-500-series-mic-pre-module","title":"A-Designs P-1 - 500-Series Mic Pre Module","description":"\u003ch2\u003eA-Designs P-1 - 500-Series Mic Pre Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eA-Design P-1\u003c\/strong\u003e has the highest fidelity of all the A-Designs Audio 500 preamps, capturing the mojo of its older and larger sibling, the extremely popular Pacifica. It has a big low end, slightly forward midrange and extended highs. If you’re a fan of the Quad Eight or API sound, you’ll love the P-1! It shines on vocals, instruments, room mics, piano, and on instruments with sharp transients such as drums and various percussion instruments.\u003c\/p\u003e\n\u003cp\u003eIf you’re building a lunchbox with drum recording in mind, a pair of P-1s is a superb choice for overheads when you want to capture the entire kit - especially the sizzle of the cymbals.\u003c\/p\u003e\n\u003ch2\u003eA-Designs P-1 Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e48-volt phantom power\u003c\/li\u003e\n\u003cli\u003e20dB pad\u003c\/li\u003e\n\u003cli\u003ePhase switch\u003c\/li\u003e\n\u003cli\u003eCustom-wound transformers\u003c\/li\u003e\n\u003cli\u003eThumb screws for easy install and un-install\u003c\/li\u003e\n\u003cli\u003eCast aluminum rotary gain control knob\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A Designs","offers":[{"title":"Default Title","offer_id":31436123045934,"sku":"SADEP1","price":949.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/A-Designs_0000_P1-Front.jpg?v=1770305013"},{"product_id":"api-512c-500-series-mic-line-preamp-di","title":"API 512C - 500 Series Mic Line Preamp\/DI","description":"\u003ch2\u003eAPI 512C - 500 Series Mic Line Preamp\/DI\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAPI 512C\u003c\/strong\u003e is a mic\/line\/instrument preamp designed to provide a low noise, unusually good sounding front end for all types of audio systems. Sonically, it is at the top of the \"Mic Preamp List\", regardless of price. Offering low noise (-129 EIN) and 65 dB of gain, the 512C includes phantom power, switchable polarity, -20 dB pad and Mic\/Line or Instrument selector. Front panel XLR and 1\/4 inch connectors combined with rear panel mic access allows for additional flexibility when installed in an API LunchBox, Six Pack, 10 position vertical rack, a 2 position horizontal rack, or an API console.\u003c\/p\u003e\n\u003ch2\u003eAPI 512C Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMic Preamp with 65 dB of gain\u003c\/li\u003e\n\u003cli\u003eFront and Back Panel Mic Input Access\u003c\/li\u003e\n\u003cli\u003eLine\/Instrument Preamp with 50 dB of gain\u003c\/li\u003e\n\u003cli\u003eFront and Back Panel Line\/Instrument Input\u003c\/li\u003e\n\u003cli\u003eLED VU meter for monitoring output level\u003c\/li\u003e\n\u003cli\u003e20 dB pad switch, applies to mic\/line\/instrument\u003c\/li\u003e\n\u003cli\u003e48v Phantom switchable power\u003c\/li\u003e\n\u003cli\u003eTraditional API fully discrete circuit design\u003c\/li\u003e\n\u003cli\u003eUses the famous API 2520 Op-Amp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat makes the API 512C unique is its long evolution from the original 1967 era 512, the first modular mic pre, to the current full featured 512C, while preserving the original sound character that made it so much a part of the early days of recording. Offering high headroom and a wide variety of inputs and input access ponts, it is ideal for unusual and demanding applications.\u003c\/p\u003e\n\u003cp\u003eImagine a situation where only a few preamps are needed, yet the smallest available console has a proportonally \"small\" mic preamp, making it useless for the demanding application, or conversely, imagine where you need a large number of preamps, and a console of sufficient inputs and quality would be too large to transport or rack mount. The 512C hits the spot with its quality and famous tone. Expand, combine or downsize at any time without trade-ins or product obsolescence. In addition, the 512C's sound and performance exceeds most \"console mic pres\" in every respect.\u003c\/p\u003e\n\u003cp\u003eThe beauty of the entire API 500 Series is its long term flexibility and lasting value when needs change over time. With a range of mounting frame options, the 512C will be a valuable asset to your performance critical applications.\u003c\/p\u003e\n\u003cp\u003eThe 512C Mic\/Line Preamp makes use of the 2510 and 2520 op-amps and therefore exhibits the reliability, long life, and uniformity which are characteristic of API products.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":31445273378862,"sku":"SAPI512C","price":599.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/SAPI512CBSK.jpg?v=1722599537"},{"product_id":"ams-neve-1073-lb","title":"Neve 1073LB Preamp - 500 Series","description":"\u003ch2\u003eNeve 1073LB\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeve 1073LB\u003c\/strong\u003e is a professional preamp designed after the classic 1073 microphone preamplifier in shape and components so it retains the unique sonic characteristics of the original. Although it’s designed on the basis of the original it’s now more compatible with your modern studio making it the perfect choice for any professional. \u003cbr\u003e\u003cbr\u003eWith new features like a fine TRIM control, switchable microphone input impedance, signal presence LED, intelligent protected switching of front combi-XLR input connector and Neve's clever Audio Processing Input design, the 1073LB takes your LunchboxTM to the next level.\u003cbr\u003e\u003cbr\u003eSimply install into an empty slot in your compatible LunchboxTM rack, connect your microphone or line level signals and inject that legendary sound into your audio creations.\u003cbr\u003e\u003cbr\u003eLaunched in 1970, the 1073 is the first choice of leading producers and artists, delivering the unique Neve sound on some of the most famous recordings of the past 40 years. The big, punchy sound of the 1073 complements any musical genre - from rock to pop, hip-hop to rap, thrash to classical. And now it is available in a 500-Series, Lunchbox format.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eu-west-1.protection.sophos.com?d=youtu.be\u0026amp;u=aHR0cHM6Ly95b3V0dS5iZS83TExzT0xEZ2lQMA==\u0026amp;i=NWZjNjczYjAxODMxYzgwZTE4OWRkYTA0\u0026amp;t=ZTBBMDZqTG1aZ0dwODgyMFBBYktPWG85Q096ZVdrMDFJdW1TWUpSaEt2ND0=\u0026amp;h=82bea24232814a55b2fef119ca69e2a9\"\u003ehttps:\/\/youtu.be\/7LLsOLDgiP0\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClassic transformer microphone preamp amp (Class A design)\u003c\/li\u003e\n\u003cli\u003eNeve designed hand-wound transformers\u003c\/li\u003e\n\u003cli\u003eBoth Mic and Line inputs are transformer balanced and earth free\u003c\/li\u003e\n\u003cli\u003eGain knob with Signal Presence LED\u003c\/li\u003e\n\u003cli\u003e+5\/-10dB level Trim control with integrated phantom power on\/off switch\u003c\/li\u003e\n\u003cli\u003ePhase, Impedance and Front Input selector switches\u003c\/li\u003e\n\u003cli\u003eFront combi-XLR connector with intelligent switching of phantom power\u003c\/li\u003e\n\u003cli\u003eAudio Processing Insert design allows processing from adjacent Neve modules in same\u003c\/li\u003e\n\u003cli\u003eLunchboxTM to be inserted into the 1073LB's pre-output stage\u003c\/li\u003e\n\u003cli\u003eMicrophone Input: Gain -80db to -20dB in 5dB steps\u003c\/li\u003e\n\u003cli\u003eLine Input: Input impedance 4k ohms bridging, gain -20dB to +10dB in 5dB steps\u003c\/li\u003e\n\u003cli\u003eOutput is transformer balanced and earth free\u003c\/li\u003e\n\u003cli\u003eDistortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output \u003cbr\u003e(80kHz bandwidth)\u003c\/li\u003e\n\u003cli\u003eFreq Response: +0.5dB 20Hz to 20kHz, -3dB at 40kHz\u003c\/li\u003e\n\u003cli\u003eCrafted in England by Neve engineers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone Amplifier Section:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone Input:\u003c\/strong\u003e Transformer balanced and earth free. Switchable impedance (300Ω or 1200Ω)Gain -80dB to -20dB in 5dB steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Input: \u003c\/strong\u003eTransformer balanced and earth free. Impedance 4kΩ bridgingGain -20dB to +10dB in 5dB steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput: \u003c\/strong\u003eTransformer balanced and earth free. Maximum Output is +28dBuOutput impedance is 75Ω @ 1kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e 0.07% from 50Hz to 10kHz @ +20dBu output (80kHz bandwidth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e +\/-0.5dB 20Hz to 20kHz, -3dB @ 40kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e -82dBu at all Line gain settings (22Hz to 22kHz bandwidth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEIN:\u003c\/strong\u003e Better than -125dBu @ 60dB gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGain control with Signal presence indicator\u003c\/li\u003e\n\u003cli\u003eFine trim control with integrated +48v phantom power on\/off push switch\u003c\/li\u003e\n\u003cli\u003eFhase switch\u003c\/li\u003e\n\u003cli\u003eMicrophone impedance selector\u003c\/li\u003e\n\u003cli\u003eFront\/rear input connector selector switch\u003c\/li\u003e\n\u003cli\u003eCombi-XLR audio input connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth: \u003c\/strong\u003e38mm (1½ inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight: \u003c\/strong\u003e132mm (5¼ inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth (excluding front panel controls \u0026amp; rear connector): \u003c\/strong\u003e145mm (5¾ inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight: \u003c\/strong\u003e1.1Kg (2½ pounds)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eModule requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack:\u003c\/strong\u003e Compliant LunchboxTM rack with integral PSU and external audio connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Rack slots:\u003c\/strong\u003e Single LunchboxTM rack slot required for each 1073LB module\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neve","offers":[{"title":"Default Title","offer_id":31519712837678,"sku":"SNEV5001073LB","price":674.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Neve500-Series_0005s_0001_1073LB.jpg?v=1766406610"},{"product_id":"neve-88rlb-500-series-mono-mic-preamp-module-l-box-format","title":"Neve 88R LB - 500-series mono mic preamp module","description":"\u003ch2\u003eNeve 88RLB - 500-Series Mono Mic Preamp Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeve 88RLB\u003c\/strong\u003e is a 500-Series mic preamp built on the technology from Neve’s two-ton flagship 88RS console. With extra features like the REGenerate function, a sweepable high-pass filter, intelligent phantom power control and a DI input, true Neve magic has never been more accessible or convenient.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue Neve 88RS mic preamp in a 500-series format, with transformer-coupled Mic input, electronically balanced Line and DI inputs and Line output\u003c\/li\u003e\n\u003cli\u003eREGeneration feature allows Line and DI inputs to be fed through the Mic input transformer to inject the legendary Neve sound\u003c\/li\u003e\n\u003cli\u003eSweepable high pass filter can be switched in or out\u003c\/li\u003e\n\u003cli\u003eIntelligent 48v phantom power function\u003c\/li\u003e\n\u003cli\u003e-20dB pad and phase reversal features for Mic, Line \u0026amp; DI inputs\u003c\/li\u003e\n\u003cli\u003eSignal Presence LED illuminates green from a level of -25dB and red from a level of +26dB\u003c\/li\u003e\n\u003cli\u003eFront combi-XLR connector for Mic input (XLR) and Line \u0026amp; DI inputs (1\/4” TRS jack - LIFT switch eliminates potential ground loops when using unbalanced jack connectors in the front input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eu-west-1.protection.sophos.com?d=youtu.be\u0026amp;u=aHR0cHM6Ly95b3V0dS5iZS9VNUJmV3FhM2d4bw==\u0026amp;i=NWZjNjczYjAxODMxYzgwZTE4OWRkYTA0\u0026amp;t=NWo1YzlpVlNtWU11TkJSZVI2MWpSTVhyODMrQldSWEw2ODNuVFozVjJBZz0=\u0026amp;h=82bea24232814a55b2fef119ca69e2a9\"\u003ehttps:\/\/youtu.be\/U5BfWqa3gxo\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong style=\"font-size: 12px;\"\u003eMicrophone Input:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Transformer balanced and earth free, input impedance \u0026gt; 1.2kohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain range:\u003c\/strong\u003e '+20dB to +70dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response: \u003c\/strong\u003e'20Hz-20kHz +\/-0.5dB, @ 60dB gain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e 40Hz-20kHz @ 60dB gain, \u0026lt;0.025% @ +20dBu output with 80kHz bandwidth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEIN: \u003c\/strong\u003eBetter than -126dBu @ 60dB gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType: \u003c\/strong\u003eElectronically balanced, input impedance \u0026gt; 10kohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain range: \u003c\/strong\u003e'-20dB to +20dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e '20Hz-20kHz +\/-0.25dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion: \u003c\/strong\u003e20Hz-20kHz @ unity gain, \u0026lt;0.0025% @ +20dBu output with 80kHz bandwidth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise: \u003c\/strong\u003e\u0026lt; -87dBu 20Hz-20kHz bandwidth @ unity gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Electronically balanced, input impedance \u0026gt; 500kohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain range:\u003c\/strong\u003e '0dB to +50dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response: \u003c\/strong\u003e'20Hz-20kHz +\/-0.25dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion: \u003c\/strong\u003e20Hz-20kHz @ 0dB gain, \u0026lt;0.0025% @ +20dBu output with 80kHz bandwidth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise: \u003c\/strong\u003e\u0026lt; -87dBu 20Hz-20kHz bandwidth @ maximum gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth: \u003c\/strong\u003e38mm (1.5 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight: \u003c\/strong\u003e132mm (5.25 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 145mm (5.75 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5kg (1.1 pounds)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack:\u003c\/strong\u003e Compliant 500-series rack with PSU and external audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Rack slots: \u003c\/strong\u003eSingle 500-series rack slot required for each 88RLB module.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neve","offers":[{"title":"Default Title","offer_id":31519720898606,"sku":"SNEV50088RLB","price":549.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Neve500-Series_0003s_0001_88RLB.jpg?v=1766406498"},{"product_id":"phoenix-audio-drs-1r-500-series-class-a-mic-pre","title":"Phoenix Audio DRS-1R - 500 Series Class A Mic Pre - Spring Sale (While stocks last)","description":"\u003ch2\u003ePhoenix Audio DRS-1R\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePhoenix Audio DRS-1R\u003c\/strong\u003e is a professional mic pre with everything you would expect to see on a standard 1U rack unit but at the size of 500 series gear. With everything from phantom power, switchable mic\/line input a mute button and much more the DRS 1R is compact and resourceful, perfect for any home or professional studio.\u003c\/p\u003e\n\u003cp\u003eThe DRS1R-500 includes very high input impedance DI circuits (10Mohm)—remarkably featuring no FETs—on every channel. This design means that guitar and bass pickups are not loaded, allowing the natural sound of both modern and vintage instruments to shine and actually enhancing the sound, sparkle and growl as if they were plugged into your favourite amp. Synths, drum machines, and even laptops can likewise be sweetened by the DRS's DI.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePhoenix Audio's unique Class A, transformerless, true-balanced mic input stage\u003c\/li\u003e\n\u003cli\u003ePhoenix Audio's transformer-balanced DSOP-2 Class-A discrete output stage with custom wound DB694 output transformer\u003c\/li\u003e\n\u003cli\u003eWired with PTFE silver plated military grade cable\u003c\/li\u003e\n\u003cli\u003e-30dB input pad\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: -6dB per octave @ 120Hz\u003c\/li\u003e\n\u003cli\u003eLED Gain Metering\u003c\/li\u003e\n\u003cli\u003ePush buttons: Hi-Pass, 48v, Phase Reverse, Switchable 48V phantom power on push-button switch\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter on Push-button Switch (Roll-off -6dB per octave @ 80Hz)\u003c\/li\u003e\n\u003cli\u003ePhase Reverse on Push-Button Switch\u003c\/li\u003e\n\u003cli\u003eMic Pre Gain Range: -30 to -70 in 5dB steps With 10dB more available on the output fader.\u003c\/li\u003e\n\u003cli\u003eOutput = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.\u003c\/li\u003e\n\u003cli\u003eFrequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response Class A (DSOP-2) output stage: 20Hz to 20kHz +- 0.5dB, Maximum\u003c\/li\u003e\n\u003cli\u003e24v built PSU so you can feel the sound of the 'true' unit and not be limited by the limitations of running at 16v which is the standard Lunchbox voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A Frequency response:\u003c\/strong\u003e 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput connections:\u003c\/strong\u003e XLR’s on rear panel of API rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone input:\u003c\/strong\u003e XLR’s Rear Panels of API rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Range (Mic input):\u003c\/strong\u003e -30 to -70 in 5dB steps With 10dB more available on the output fader.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain reduction:\u003c\/strong\u003e -30dB push-button Mic\/Line switch (Mic input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Input Impedance DI:\u003c\/strong\u003e Mono 1\/4″ Jack on front panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Meter:\u003c\/strong\u003e LED Metering. (Green = -2dbu, +4dbu \u0026amp; 0dBu, Yellow = +13dbu Red= +16dBu)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhantom Power:\u003c\/strong\u003e Switchable phantom on Push-button Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Pass Filter:\u003c\/strong\u003e on Push-button Switch, 120hz 6db per octave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Reverse:\u003c\/strong\u003e on Push-button Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMute:\u003c\/strong\u003e on Push-button Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMic Input Frequency Response:\u003c\/strong\u003e -0.4dB @ 40Hz, -0.3dB @ 25kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDI Input Frequency Response:\u003c\/strong\u003e -0.3dB @ 40Hz, – 0.5dB @ 25kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Headroom:\u003c\/strong\u003e +26dB on Mic-Pre stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDI Stage gain:\u003c\/strong\u003e Maximum of 30dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 24v built PSU\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phoenix","offers":[{"title":"Default Title","offer_id":31528117207086,"sku":"SPHE500DRS1R","price":390.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Phoenix-Audio-DRS1R.jpg?v=1683295892"},{"product_id":"rupert-neve-design-511","title":"Rupert Neve Design 511","description":"\u003ch2\u003eRupert Neve Design 511\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRupert Neve Design 511\u003c\/strong\u003e is a professional quality mic pre that provides you with flexibility with texture, gain, and filters. Rupert Neve designed the 511 to combine classic sonic's with 500-series value. Incorporating the 517’s powerful preamp, the 5012’s universally useful sweepable high pass filter, and the transformer-saturating power of a variable silk circuit derived from Rupert Neve Designs’ flagship Portico II Channel, the 511 is a Rupert Neve-designed mic pre for the masses.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for 500 Series by Mr. Rupert Neve\u003c\/strong\u003e\u003cbr\u003eRupert Neve: \"While creating functional 500 series modules is relatively simple, designing those modules to equal their non-500 series counterparts with the current, voltage and space restraints is quite challenging. In creating the 511 500-Series Modules, Rupert Neve Design experimented with a number of different transformer and circuit designs to achieve the same presence and sweetness found in the Portico Series of modules. The result of these efforts is that outside of the slightly lowered headroom, the Rupert Neve Design 500 series modules are nearly indistinguishable from standard Portico Series modules, and are perfectly suited for studios of the highest caliber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Section\u003c\/strong\u003e\u003cbr\u003eInput signals may be derived from Mic or Line sources (make sure 48V is off for line sources!). The input has a 10K Ω non-reactive input resistance that handles a full 22dBu signal without the need for a pad. The pre-amp is a TLA non-reactive design that precludes the loading of microphones with limited driving capability. A primary gain control provides 66dB of gain in 6dB increments for easy recall, with a +\/- 6dB trim for fine adjustment. For condenser microphones and powered DIs, there is +48V phantom power. A transient-optimized HPF continuously covering the range from 20-250Hz is included to tame rumble and proximity effect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture\u003c\/strong\u003e\u003cbr\u003eOne of the key developments in the 511 is the Red Silk \/ Texture control from the Portico II Channel. Building on the \"Silk\" mode found in the Portico Series mic pre-amplifiers, Texture is designed to adjust the actual amount of harmonic music content from the source material, in effect, providing wide range of tonal options for the preamplifier. Like the original Portico Silk, the Silk Red \/ Texture works by reducing negative feedback on the output transformer and adjusting the frequency response to more closely resemble Mr. Rupert Neve’s vintage designs. With the 511, the Texture control allows these techniques to be pushed further than previous designs, adding about 10 times the desirable THD of the original silk control at its maximum setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Noise, Low Distortion Operation\u003c\/strong\u003e\u003cbr\u003eMuch care was given in designing the 511 to produce as little noise and non-harmonic distortion as possible. Carefully implemented signal paths and Class A operation are a large part of the 511’s sweet, whisper quiet performance. For more information, go to Mr. Rupert Neve’s Design Notes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Transformers?\u003c\/strong\u003e\u003cbr\u003eA complete discussion on transformers is out of place at this point, but it is helpful to review some of the essentials where it will be seen that a design needs to be viewed as a whole, not simply from the point of view of a single component.\u003c\/p\u003e","brand":"Rupert Neve Designs","offers":[{"title":"Default Title","offer_id":31531495784494,"sku":"SRND511","price":537.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/RND-511-front.psd.jpg?v=1775826651"},{"product_id":"api-312-500-series-mic-pre-module","title":"API 312 - 500-Series Mic Pre Module","description":"\u003ch2\u003eAPI 312 - 500-Series Mic Pre Module\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAPI 312\u003c\/strong\u003e is 500 series adaptation of API's original 312 microphone pre-amp. The 312's design is based on Saul Walker’s original designs and includes API’s 2520 op-amp and AP2516 transformer.\u003c\/p\u003e\n\u003cp\u003eThe API-312 is one of API's most sought after and famous mic pre-amps. First introduced in the 1970s, it is well known and respected throughout the recording industry, and is the building block of the modern 3124 rack unit.\u003c\/p\u003e\n\u003cp\u003eBased on API co-founder Saul Walker's original designs, the API 312 Mic Pre combines our 2520 op-amps and proprietary transformers. It delivers the analogue warmth, massive headroom and unmistakable sound for which API is known, in a convenient 500 Series format.\u003c\/p\u003e\n\u003cp\u003eFollowing the success of the hand wired 312 50th Anniversary Edition, this standard production version offers the classic API sound at an affordable price. Like all API products, the 312 is backed by API's unique Five Year Warranty.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPI's Classic 312 Microphone Pre-amp in a 500 Series module\u003c\/li\u003e\n\u003cli\u003eVintage Style Analogue VU Meter\u003c\/li\u003e\n\u003cli\u003eMaximum 69dB of gain\u003c\/li\u003e\n\u003cli\u003eTraditional API fully discrete circuit design with 2520 Op Amp\u003c\/li\u003e\n\u003cli\u003eProprietary AP2516 Input Transformer\u003c\/li\u003e\n\u003cli\u003e20 dB pad switch\u003c\/li\u003e\n\u003cli\u003e3:1 Output Transformer Tap Selection\u003c\/li\u003e\n\u003cli\u003eSwitchable 48V phantom power\u003c\/li\u003e\n\u003cli\u003ePeak LED\u003c\/li\u003e\n\u003cli\u003eAPI's Five Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":32414273896494,"sku":"SAPI312","price":662.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/SAPI312.jpg?v=1722598976"},{"product_id":"phoenix-audio-ascent-500-class-a-mic-pre-with-vocal-shaping-eq","title":"Phoenix Audio Ascent 500 - Class A Mic Pre with Vocal Shaping EQ - 500-Series","description":"\u003ch2\u003ePhoenix Audio Ascent 500 - Class A Mic Pre with Vocal Shaping EQ - 500-Series\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA Versatile, Modern Class-A Mic Preamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Phoenix Ascent Mic Preamp take a modern approach to Class-A circuit design that delivers a wide range of tones without sacrificing the beloved vibe of true Class-A design. The unique Ascent circuit can go from ultra-clean sounds suitable for audiophile recordings all the way to the warm, saturated tones reminiscent of the UK’s most heralded vintage designs. Versatility and superior sound have made the Ascent Pre-amp top-tier choice for engineers around the world and a modern day classic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHi-Fi Transformerless Mic Input Stage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur exclusive electronically-balanced, transformerless mic input circuit delivers fast transients and the full frequency spectrum (from sub-bass to the highest air band), while still delivering the full, warm and smooth characteristics that make engineers love Class-A mic preamps. Boldly outperforming transformer-based designs in both the frequency response and slew rate, the DRS delivers articulate, punchy and full-bodied input signals, allowing you to drive the output stage for a vast range of pure Class-A tones—from bold clarity to vintage warmth, and everything in-between. With a very high mic impedance of 10K, it is the perfect companion for ribbon mics and dynamics mic that often need specialist mic pre amps, the Shure SM7B particularly shines.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLegendary Transformer-Balanced Output Stage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur custom-wound DB694 output transformer is coupled to Phoenix’s proprietary, fully discrete DSOP-2 output amplifier. The DSOP-2 is a direct descendent of the venerable TF1 amp which Phoenix’s Audio designers : Shaun Leveque \u0026amp; David Rees, developed originally as an upgrade for vintage Neve modules. Going beyond the TF1, the DSOP2 is the pinnacle of Class-A output circuit design, offering up a smooth transition from ultra-clean to beautifully saturated tones.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEasy and Intuitive In The Studio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause you’re working with a clean, robust, electronically-balanced input signal, the Ascent Mic Preamp makes dialing in your exact sound easy, intuitive and quick. By working the familiar stepped input gain control (up to 70db alone) and the -15dB pad against the variable output fader (which provides an additional 10dB of gain), you can dial in your preferred tones without having to consider an overly complex gain architecture. It’s all about driving the versatile DSOP-2 output stage to your exacting tastes, whatever they may be in any given moment. Like so many other engineers, you’ll find yourself reaching for the Ascent Mic Preamp\/DI over and over again to reliably deliver a vast array of outstanding sounds for any instrument or voice you’re recording.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVari-Filter Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePowerful variable high pass filter from 45hz to 250hz allowing you the ability to control and shape tones of all types\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVocal shaping Equalizer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUniquely designed vocal shaping Equalizer effects designed to benefit the vocalist with powerful equalizer controls including our classic Sheen control perfected or vocal recording with huge gain range control that always sounds musical and never harsh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures of Ascent 500 Mic Preamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhoenix Audio’s unique Class A, transformerless, true-balanced mic input stage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhoenix Audio’s transformer-balanced DSOP-2 Class-A discrete output stage with custom wound DB694 output transformer -15dB input pad\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLED Gain Metering\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePush buttons: Hi-Pass, 48v, Phase Reverse, Switchable 48V phantom power on push-button switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVocal shaping EQ, 16db of +\/- gain control on selectable frequency switch : 10K, 15K \u0026amp; Sheen (25K)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVariable High Pass Filter on Push-button Switch (Roll-off -6dB per octave @ 45 to 250Hz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhase Reverse on Push-Button Switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Pre Gain Range: -30 to -70 in 5dB steps With 10dB more\u003cbr\u003eavailable on the output fader.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @\u003cbr\u003e25kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response Class A (DSOP-2) output stage: 20Hz to 20kHz +- 0.5dB, Maximum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e24v built PSU so you can feel the sound of the ‘true’ unit and not be limited by the limitions of running at 16v which is the standard Lunchbox voltage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phoenix","offers":[{"title":"Default","offer_id":44827046838450,"sku":"SPHEASCENT500","price":665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Phoenix-Audio_0004_Ascent500-FrontV2.jpg?v=1729606507"},{"product_id":"roger-mayer-rm-68mp-mic-preamplifier-500-series-module","title":"Roger Mayer RM 68MP Mic Preamplifier - 500 Series Module","description":"\u003ch2\u003eRoger Mayer RM 68MP Mic Preamplifier - 500 Series Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRoger Mayer 68MP\u003c\/strong\u003e 500-Series Module is a mic preamp that delivers a clean and bright sound with a full-sounding bottom end on sources such as kick drum and bass guitar. This great-sounding mic preamp is clean sounding and wouldn't be described as a \"character\" preamp as the other Roger Mayer devices are intended to cover that side of things later in the chain. \u003c\/p\u003e\n\u003cp\u003eThe 68MP captures a full range of signal that allows the user to capture as much detail as needed without conveying too much \"mud\" in the low-mid area. Using the 68MP's simple but useful 3-LED meter system you can quickly identify the sensible operating levels of the unit. Alongside the meter section is a polarity inverter, -20dB pad, a high-pass filter that is set at 12dB\/octave slope at 120Hz and a toggle to enable the instrument input. \u003c\/p\u003e\n\u003cp\u003eLike all of Rogers 500-Series modules, the 68MP runs on internal 48v rails, stepped up from the standard 32v 500-series supply for greater headroom. Unusually for a modern design, 48V phantom power is always available; there’s no on\/off switch. By using an input transformer rather than the [electronically balanced] op‑amp approach, the 68MP can safely provide phantom power without the engineer having to engage it; it’s how all of his console designs operated ‘back in the day’ at Olympic and Electric Lady studios, and he considers it to be perfectly safe.\u003c\/p\u003e\n\u003ch3\u003eRoger Mayer RM 68MP Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGolden Era Analogue Microphone Pre-Amplifier Design\u003c\/li\u003e\n\u003cli\u003eDiscrete Ultra Low Noise Class A Design\u003c\/li\u003e\n\u003cli\u003eUltra Wide Bandwidth\u003c\/li\u003e\n\u003cli\u003eEast Scan Unique 3 Band Sample and Hold LED Metering\u003c\/li\u003e\n\u003cli\u003eCustom Hand Wound Ferrite Input Transformer for fully isolated balanced input\u003c\/li\u003e\n\u003cli\u003e22 way stepped Microphone Gain Control\u003c\/li\u003e\n\u003cli\u003e22 way stepped Output Gain Control\u003c\/li\u003e\n\u003cli\u003eFront Panel Instrument Input\u003c\/li\u003e\n\u003cli\u003e180 degree Phase Reversal Switch\u003c\/li\u003e\n\u003cli\u003e-15Db Pad Switch for Microphone or Instrument\u003c\/li\u003e\n\u003cli\u003eHigh Pass FIlter 12Db\/Octave\u003c\/li\u003e\n\u003cli\u003eTriple Shielded 6 layer PC Card construction\u003c\/li\u003e\n\u003cli\u003eUltra low noise 48v Phantom Supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roger Mayer","offers":[{"title":"Default","offer_id":55091355320694,"sku":"SROM68MP500","price":695.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/68MP-500_0000s_0002_RM_68MP_Front.jpg?v=1734453240"},{"product_id":"aea-rpq500-preamp-module-eq-lunchbox-500-series","title":"AEA RPQ503 Preamp Module \u0026 EQ - Lunchbox 500 Series","description":"\u003ch2\u003eAEA RPQ503 Preamp Module \u0026amp; EQ - Lunchbox 500 Series\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAEA RPQ503\u003c\/strong\u003e is the next evolution in AEA’s trusted lineage of high-impedance, high-gain preamplifiers.\u003c\/p\u003e\n\u003cp\u003eBased on the 3rd Generation circuit design AEA's celebrated RPQ3, the RPQ503 brings the same rich and natural sound to the 500 Series Format. Featuring a powerful combination of ultra-low noise, low-distortion op-amps, ultra-high 68KΩ input impedance, and 85dB of clean gain, the RPQ503 delivers exceptional clarity and detail. More than just a preamp, the RPQ503 also includes the expanded EQ section of the RPQ3, with boost and cut controls for both low and high end, on custom, compact, dual-concentric potentiometers.\u003c\/p\u003e\n\u003cp\u003eAt once open and transparent but equally responsive and dynamic, the RPQ503 is a versatile tool for the front end of any signal path.\u003c\/p\u003e\n\u003ch2\u003eAEA RPQ500 Feature set:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1-Space 500-series preamp\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAEA Gen 3 preamp circuitry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltra-high 68KΩ input impedance (phantom power off)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e7 to 85 dB of gain\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLF\/HF sweepable frequency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEQ boost\/cut, +\/-20 dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEQ in\/out switching; center detents on EQ gain pots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e+48V phantom\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic\/line input switching (line input bypasses mic pre)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% Handcrafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEA","offers":[{"title":"Default Title","offer_id":56020812071286,"sku":"SAEARPQ503","price":665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/AEA-RPQ503_0004_FrontLightsOn.jpg?v=1753965879"},{"product_id":"british-audio-technologies-altec-1588-500-series-mic-preamp","title":"British Audio Technologies Altec 1588 500-Series Mic Preamp","description":"\u003ch2\u003eBritish Audio Technologies Altec 1588 500-Series Mic Preamp\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eBAT 1588\u003c\/strong\u003e\u003cspan\u003e brings the legendary \u003c\/span\u003e\u003cstrong\u003eAltec 1588C\u003c\/strong\u003e\u003cspan\u003e microphone preamp circuit to the 500-series world — not as a clone but as a\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003efaithful evolution\u003c\/strong\u003e\u003cspan\u003e tuned for modern workflows. Packed with vintage vibe and loaded with premium Cinemag transformers (yes, the same transformer supplier used by UA, API, AeA, Moog, Avalon Design…) optimised for today’s demanding studios. The \u003c\/span\u003e\u003cstrong\u003eBAT 1588\u003c\/strong\u003e\u003cspan\u003e is not trying to be everything, it’s trying to be \u003c\/span\u003e\u003cem\u003eexactly the right t\u003c\/em\u003e\u003cspan\u003eool — for rich tone, effortless vibe, and musical colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNot Just Transparent — Purposefully Musical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhere many modern 500-series preamps focus on transparency and precision, the BAT 1588 leans into musicality. This isn’t one dimensional — it brings your sound alive. The subtle harmonic coloration, transformer saturation and mid-forward focus provide the kind of texture that makes vocals sit in a mix effortlessly. Think “record-ready tone” from the first take.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Circuit, Complex Tone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Altec 1588C is one of the most revered transistor-based preamps for a reason: it’s minimalist but sounds massive. The BAT 1588 preserves the original signal path with discrete transistor topology, avoids op-amps or ICs and stays transformer-balanced on both input and output. It’s the sound of radio hits from the ‘60s and ‘70s — now with lower noise and modern stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExamples of uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eVocals\u003c\/strong\u003e: Warm, detailed, and naturally forward\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrums\u003c\/strong\u003e: Rounded transients with punch and grit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuitars\u003c\/strong\u003e: Organic and harmonically rich\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys\/Synths\u003c\/strong\u003e: Adds life and vibe to DI sounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong\u003eGain\u003c\/strong\u003e: ~55dB (perfect for dynamic mics, ribbons with boosters or condenser mics)\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eFrequency Response\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: 0.5dB deviation from 20Hz to 25KHz\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eCircuit\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: Discrete Altec 1588C-inspired topology with no op-amps or ICs on the signal path\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eTransformers\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: Cinemag input\/output\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eTrim adjustment\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: To fine tune the preamp saturation\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eOutput Fader\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: The output fader lets you saturate the output transformer for added colour, then reduce the level before the next stage\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003ePower\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e:\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Standard 500 Series Rack \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e(±16V)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eComponents\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: 1 Watt 1% metal film resistors,\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Nichicon Gold \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ecapacitors, high quality potentiometers and E-switch high quality switches\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"has-link-color wp-elements-0e579cfd986711ae8de08f051c83ce91\"\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eBuild\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: Hand-assembled in small batches and tested for consistency\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"British Audio Technologies","offers":[{"title":"Default Title","offer_id":56563507822966,"sku":"SBRT1588","price":662.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/BAT1588V2.psd_0001_BAT1588Front.jpg?v=1779280060"},{"product_id":"bae-1073mpl","title":"BAE 1073MPL - 500 Series version of 1073MP","description":"\u003ch2\u003eBAE 1073MPL - 500 Series version of 1073MP\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1073MPL\u003c\/strong\u003e is the 500 Series version of the 1073MP (a mic pre-amp version of the 1073 equaliser), having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eTwo selectable impedances makes the 1073MPL work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MPL maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003ch2\u003eBAE 1073MPL Key Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 500 series module.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOriginal Marconi knobs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine-level capability for extra versatility as a line preamp.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame Carnhill St Ives transformers as the 1073 and 1084.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBAE 1073MPL Specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e10Hz to -3dB at 55kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Input Impedance: \u003c\/strong\u003e10k ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance: \u003c\/strong\u003e65 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Mode Rejection Ratio: \u003c\/strong\u003e100dB min @ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level: \u003c\/strong\u003e+27.4 dBu @ 600Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain dB; \u003c\/strong\u003e0 to 71 dB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683362648438,"sku":"SBAE5001073MPL","price":908.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/BAE_0001_1073MPL-Front.jpg?v=1763477779"}],"url":"https:\/\/studiocare.com\/collections\/500-series-mic-pres.oembed","provider":"Studiocare","version":"1.0","type":"link"}