{"title":"ART","description":"","products":[{"product_id":"art-s8","title":"ART S8 - Eight Channel Mic Splitter","description":"\u003ch2\u003eART S8 - Eight Channel Mic Splitter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART S8\u003c\/strong\u003e lets your signals be in two places at once.\u003c\/p\u003e\n\u003cp\u003eIt's an 8-channel splitter in a 1U rackmount enclosure, with one direct output and one transformer-isolated output per channel. The passive design doesn't require power, but the direct outputs will pass phantom power for use with active microphones. Each channel also features a switchable ground lift on every channel to reduce noise due to ground loops, and an input pad to accommodate line level sources.\u003c\/p\u003e\n\u003cp\u003eWhen two outputs are better than one, use the S8 to connect to both the front-of-house and monitor mixers, for creative parallel processing, or to record safety tracks at lower levels in case of clipping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART S8 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-Channel 2-Way Splitter\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Connections\u003c\/li\u003e\n\u003cli\u003e1x Direct and 1x Transformer-Isolated Output per Channel\u003c\/li\u003e\n\u003cli\u003eDirect Outputs Pass Phantom Power\u003c\/li\u003e\n\u003cli\u003eSwitchable Ground Lift and Input Pad per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART S8 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 Hz to 20K Hz, ±0.25 dB @ -15 dBu, -3 dB at approximately 165K Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLess than 0.26% from 20 Hz to 20K Hz at –15 dBu input\u003c\/li\u003e\n\u003cli\u003eLess than 0.1% from 45 Hz to 20K Hz at –15 dBu input\u003c\/li\u003e\n\u003cli\u003e0.002% Typical at 1K Hz, –15 dBu input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Response:\u003c\/strong\u003e Less than 10 degrees at 20K Hz (ref. 1K Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e Greater than 1.1K Ohms at 1K Hz (Typical driving source impedance is 150 Ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e Less than 255 Ohms at 1K Hz (Typical output load impedance is 1K Ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Mode Rejection Ratio:\u003c\/strong\u003e Greater than 105 dB @ 60 Hz, Greater than 80 dB @ 3K Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Insertion Loss:\u003c\/strong\u003e Approximately 2 dB at 1K Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level For 1% THD:\u003c\/strong\u003e -1.4 dBu at 20 Hz, +3.5 dBu at 30 Hz, +9.4 dBu at 50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HWD): \u003c\/strong\u003e44.5 x 482.6 x 95mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.75 lbs. (1.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285666862,"sku":"SARTARTS8","price":240.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/S8.jpg?v=1754582818"},{"product_id":"art-s8-3-way-8-channel-mic-split","title":"ART S8-3Way - Eight Channel 3-Way Mic Splitter","description":"\u003ch2\u003eART S8-3Way - Eight Channel 3-Way Mic Splitter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART S8-3Way\u003c\/strong\u003e lets your mic signals be in three places at once.\u003c\/p\u003e\n\u003cp\u003eIt's an 8-channel splitter in a 1U rackmount enclosure with one direct output and two transformer-isolated outputs per channel. The passive design doesn't require power, but the direct outputs will pass phantom power for use with active microphones.\u003c\/p\u003e\n\u003cp\u003eWhen three outputs are better than one, the S8-3Way is ideal for sending signals to multiple destinations, such as front-of-house, monitor, and broadcast or recording mixers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART S8-3Way Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-Channel 3-Way Splitter\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Connections\u003c\/li\u003e\n\u003cli\u003e1x Direct and 2x Transformer-Isolated Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eDirect Outputs Pass Phantom Power\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285699630,"sku":"SARTARTS83WAY","price":295.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/S8-3Wayfront.jpg?v=1754583444"},{"product_id":"art-dj-pre-ii","title":"ART DJ Pre II - Phono Preamp","description":"\u003ch2\u003eART DJ Pre II - Phono Preamp\u003c\/h2\u003e\n\u003cp\u003eVinyl offers a unique listening experience, and a phono preamp is an important component in getting the best sound reproduction from your records.\u003c\/p\u003e\n\u003cp\u003eAn audiophile-grade preamp can cost hundreds or even thousands of dollars, but there are accessible alternatives that will enhance your listening experience without a boutique price tag. The \u003cstrong\u003eDJ Pre II\u003c\/strong\u003e is the most affordable phono preamp from ART, and was named Best Budget Preamp by Popular Science magazine in 2022, 2023, and 2024.\u003c\/p\u003e\n\u003cp\u003eBeyond its high-quality, low-noise circuitry, the DJ Pre II offers more control of your sound. Boost or cut by up to 10 dB for proper gain-staging into the rest of your system, engage the low-cut filter to eliminate rumble, and switch the input capacitance between 100 and 200 picofarads (pF) to find the response that best matches your cartridge for the most pleasing tone.\u003c\/p\u003e\n\u003cp\u003eOffering clear sound and essential control, the DJ Pre II is a compact, convenient upgrade to your sound system that costs less than an afternoon of digging through the crates at your favourite record store.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART DJ Pre II Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh accuracy\/low noise preamp\u003c\/li\u003e\n\u003cli\u003eSwitchable low cut rumble filter\u003c\/li\u003e\n\u003cli\u003eVariable preamp gain\u003c\/li\u003e\n\u003cli\u003eSignal present\/clip indicator\u003c\/li\u003e\n\u003cli\u003eSelectable cartridge loading\u003c\/li\u003e\n\u003cli\u003eRCA preamp outputs\u003c\/li\u003e\n\u003cli\u003eHeavy duty extruded chassis\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285765166,"sku":"SARTDJPRE2CE","price":51.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/DJPreIIfront.jpg?v=1753179488"},{"product_id":"art-dmpaiie4-pro","title":"ART Digital MPA-II - 2-Channel Tube Preamp with Digital Connectivity","description":"\u003ch2\u003eART Digital MPA-II - 2-Channel Tube Preamp with Digital Connectivity\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART Digital MPA II \u003c\/strong\u003eis a two-channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure. It offers the features and sound of the Pro MPA II, with extended connectivity for any digital recording setup.\u003c\/p\u003e\n\u003cp\u003eIn addition to the analog XLR and 1\/4 connections, it features AES\/EBU, S\/PDIF, and optical outputs. It also features an optical input and word clock input and thru jacks. Sample rate and dither is set by a rotary control on the front panel.\u003c\/p\u003e\n\u003cp\u003eSimple to use and easy to integrate, the Digital MPA II offers classic tube warmth for the modern studio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Digital MPA-II Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable Input Impedance For Flexible Microphone Voicing (150 ohms To 2400 ohms)\u003c\/li\u003e\n\u003cli\u003eSelectable Plate Voltage\u003c\/li\u003e\n\u003cli\u003eLarge VU Meters\u003c\/li\u003e\n\u003cli\u003eBacklit Function Switches\u003c\/li\u003e\n\u003cli\u003eDiscrete Class-A Input Microphone Preamplifier\u003c\/li\u003e\n\u003cli\u003eLow Noise at Lower Gain Settings\u003c\/li\u003e\n\u003cli\u003eExtremely Low Total Harmonic Distortion (THD)\u003c\/li\u003e\n\u003cli\u003eWide Frequency Response\u003c\/li\u003e\n\u003cli\u003eAdditional Front Mounted Instrument Input Jack\u003c\/li\u003e\n\u003cli\u003eSupports Mid\/Side Miking Technique\u003c\/li\u003e\n\u003cli\u003eOperates at +4dbm\/-10dbv Output\u003c\/li\u003e\n\u003cli\u003eSelectable Stereo\/Dual Operation of Output Controls\u003c\/li\u003e\n\u003cli\u003eAutomatic Instrument Input Selection\u003c\/li\u003e\n\u003cli\u003e24-204KHz External sample rate\u003c\/li\u003e\n\u003cli\u003e44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates\u003c\/li\u003e\n\u003cli\u003e24\/16 bit switchable dithering\u003c\/li\u003e\n\u003cli\u003eWide dynamic range A\/D\u003c\/li\u003e\n\u003cli\u003eRotary Encoder for quick selection of sample rate\u003c\/li\u003e\n\u003cli\u003eSeparate analog and digital output level controls\u003c\/li\u003e\n\u003cli\u003eDigital Level LED meters display both Average and Peak level\u003c\/li\u003e\n\u003cli\u003eADAT optical I\/O\u003c\/li\u003e\n\u003cli\u003eSync to incoming ADAT data rate\u003c\/li\u003e\n\u003cli\u003eSwitch selectable optical output (S\/PDIF or ADAT)\u003c\/li\u003e\n\u003cli\u003eAES\/EBU and S\/PDIF outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285797934,"sku":"SARTDMPAIICE","price":518.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/DigitalMPAII.jpg?v=1753181998"},{"product_id":"art-dualzdirect","title":"ART Dual Z Direct - 2-Channel Passive DI Box","description":"\u003ch2\u003eART Dual Z Direct - 2-Channel Passive DI Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART DualZDirect\u003c\/strong\u003e is a 2-channel passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\n\u003cp\u003eEach input signal is sent to a transformer-isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\n\u003cp\u003eFront panel switches engage up to 40 dB of attenuation to accommodate high-level signals, and a low-pass Bessel filter to eliminate high-frequency interference. Rear switches activate a ground lift to reduce hum, and invert the signal polarity to resolve phase issues, such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\n\u003cp\u003eAs a fully passive design, the DualZDirect doesn’t require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\n\u003cp\u003eSimple and durable, the DualZDirect is a compact DI in a rugged aluminum enclosure with two indpendent channels and a versatile feature set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Dual Z Direct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Inputs and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (-20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Low-Pass Filter, Ground Lift, and Phase Invert per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285961774,"sku":"SARTDUALZDIRECT","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/DualZDirect.jpg?v=1753188196"},{"product_id":"art-head-amp-4-four-output-stereo-headphone-amp","title":"ART HeadAmp 4 - Four Channel Headphone Amplifier","description":"\u003ch2\u003eART HeadAmp 4 - Four Channel Headphone Amp\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART HeadAmp 4\u003c\/strong\u003e is a high-output, low-noise, low-distortion headphone amplifier that extends the connectivity of your mixer, audio interface, or other sound source.\u003c\/p\u003e\n\u003cp\u003eIt features four output channels with independent volume controls. Each output has 1\/4 and 1\/8 stereo connections that can be used simultaneously, so you can connect up to 8 pairs of headphones.\u003c\/p\u003e\n\u003cp\u003eCompact and durable, the HeadAmp 4 is an ideal solution to split a signal between multiple listeners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadAmp 4 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x Output Channels\u003c\/li\u003e\n\u003cli\u003eIndependent Volume Per Channel\u003c\/li\u003e\n\u003cli\u003eStereo 1\/4\" and 1\/8\" Inputs\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" and 1\/8\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003e12V DC Adapter Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadAmp 4 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e +14dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 90.9k Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e +14dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gain:\u003c\/strong\u003e 20dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 47 Ohms (each output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 - 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS\/N Ratio:\u003c\/strong\u003e \u0026gt; 90dB (ref 0dBu)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e \u0026lt; 0.01%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMD (SMPTE):\u003c\/strong\u003e \u0026lt; 0.01%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12vDC (Adapter Included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions HxWxD:\u003c\/strong\u003e 47 x 117 x 104mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight(lbs\/kg):\u003c\/strong\u003e 1.35 \/ 0.61kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445285994542,"sku":"SARTHEADAMP4CE","price":74.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/HeadAmp4fronttop.jpg?v=1753191546"},{"product_id":"art-head-amp-6-six-channel-1u-headphone-amp","title":"ART HeadAmp 6 - Six Channel Headphone Amplifier","description":"\u003ch2\u003eART HeadAmp 6 - Six Channel Headphone Amp\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART HeadAmp 6\u003c\/strong\u003e is a six-channel stereo headphone amplifier with three outputs per channel, so up to eighteen sets of headphones can be connected simultaneously.\u003c\/p\u003e\n\u003cp\u003eEach channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need.\u003c\/p\u003e\n\u003cp\u003eLED meters with clipping indicators for the main signal bus and each output channel confirm signal activity at a glance.\u003c\/p\u003e\n\u003cp\u003eThe rear panel has balanced XLR and 1\/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can quickly switch sources without getting behind the rack.\u003c\/p\u003e\n\u003cp\u003eThe HeadAmp 6 offers the most outputs of any ART headphone amplifier, and is ideal for working with large ensembles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadAmp 6 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6x Output Channels\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Direct In Overrides Rear Inputs\u003c\/li\u003e\n\u003cli\u003e3x 1\/4\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 18 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003eAux In with Main \/ Aux Balance per Channel\u003c\/li\u003e\n\u003cli\u003eMute L, Mute R, and Mono Switches per Channel\u003c\/li\u003e\n\u003cli\u003eLED Meters with Clip Indicators for Main Bus and Output Channels\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445286125614,"sku":"SARTHEADAMP6CE","price":187.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/HeadAmp6.jpg?v=1753270589"},{"product_id":"art-headamp-6-pro-6-channel-headphone-amp","title":"ART HeadAmp 6 Pro - Six Channel Headphone Amplifier","description":"\u003ch2\u003eART HeadAmp 6 Pro - Six Channel Headphone Amp\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHeadAmp 6 Pro\u003c\/strong\u003e is ART's most fully-featured headphone amplifier. It has six channels with flexible controls, detailed metering, and two outputs per channel, so up to twelve sets of headphones can be connected simultaneously.\u003c\/p\u003e\n\u003cp\u003eEach channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need.\u003c\/p\u003e\n\u003cp\u003eThe main signal bus and output channels feature 8-segment LED meters with clip indicators for detailed visual feedback. The rear panel has balanced XLR and 1\/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can easily switch sources without getting behind the rack.\u003c\/p\u003e\n\u003cp\u003eThe HeadAmp 6 Pro offers the most control of any ART headphone amplifier, and is ideal for working with medium to large ensembles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadAmp 6 Pro Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6x Output Channels\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" XLR Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Direct In Overrides Rear Inputs\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 12 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003eAux In with Main \/ Aux Balance per Channel\u003c\/li\u003e\n\u003cli\u003eMono L and Mono R Switches per Channel\u003c\/li\u003e\n\u003cli\u003e2-Band EQ per Channel\u003c\/li\u003e\n\u003cli\u003eLED Meters with Clip Indicators for Main Bus and Output Channels\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445286256686,"sku":"SARTHEADAMP6PROCE","price":215.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/HeadAmp6Pro.jpg?v=1753271189"},{"product_id":"art-headtap-headphone-tap","title":"ART HeadTap - Headphone Tap","description":"\u003ch2\u003eART HeadTap - Headphone Tap\u003c\/h2\u003e\n\u003cp\u003eSometimes, floor monitors can be a problem. Perhaps there isnt enough room on stage, or somebody sits in and there isnt sufficient coverage. When it isnt easy to add another monitor, the \u003cstrong\u003eART HeadTap\u003c\/strong\u003e makes it easy to add headphones.\u003c\/p\u003e\n\u003cp\u003eIts designed to connect between a power amp and speaker, tapping the signal to drive two headphone outputs. Internal resistors keep the impedance high enough to protect the headphones, and the amplifier is protected from encountering a load impedance that's too low when using one or more HeadTap units, with or without speakers connected.\u003c\/p\u003e\n\u003cp\u003eThe HeadTap will also work with a stereo headphone amplifier such as the ART HeadAmp 4, HeadAmp 6, or HeadAmp 6 Pro to power even more headsets.\u003c\/p\u003e\n\u003cp\u003ePassive, compact, and convenient, the HeadTap is a simple solution that lets you hear what you need, where you need it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadTap Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a Headphone Tap between a Power Amp and Speaker\u003c\/li\u003e\n\u003cli\u003eParallel 1\/4\" Inputs to Daisy-Chain Taps and Speakers\u003c\/li\u003e\n\u003cli\u003eMono \/ Stereo Input Selector\u003c\/li\u003e\n\u003cli\u003eDual 1\/4\" Headphone Jacks with Level Control\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART HeadTap Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Amp Loop:\u003c\/strong\u003e Paralleled 1\/4” stereo TRS jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Power Input:\u003c\/strong\u003e 20 - 50W max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 2 x 1\/4” stereo\/mono headphone jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive or Passive:\u003c\/strong\u003e Passive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 43mm x 93mm x 70mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.0 lb (4.6 kg)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445286289454,"sku":"SARTHEADTAP","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/HeadTap.jpg?v=1753271889"},{"product_id":"art-mx822-eight-channel-1u-rackmount-mixer","title":"ART MX822 - Eight Channel Stereo Rackmount Mixer","description":"\u003ch2\u003eART MX822 - Eight Channel Stereo Rackmount Mixer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART MX822\u003c\/strong\u003e is an eight-channel stereo mixer with an effects loop, and the most fully-featured rackmount line mixer from ART.\u003c\/p\u003e\n\u003cp\u003eEach channel has dual 1\/4” unbalanced inputs for mono or stereo sources, and channel 1 also has a microphone input with a balanced XLR connection and switchable phantom power.\u003c\/p\u003e\n\u003cp\u003eAll channels have signal and clipping indicators, as well as controls for level, pan, and EFX send. The master section has controls for the main and headphone output levels, as well as the EFX return and LED metering.\u003c\/p\u003e\n\u003cp\u003eThe main outputs use balanced XLR connectors, and multiple units can be chained together using the Main Expand and EFX Buss Link jacks.\u003c\/p\u003e\n\u003cp\u003eVersatile, expandable, and with a fully stereo signal path, the MX822 is a powerful mixing solution for studio and stage use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART MX822 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEight stereo\/mono input channels with individual level, pan and effects send controls\u003c\/li\u003e\n\u003cli\u003eExternal effects loop with independent send and return controls\u003c\/li\u003e\n\u003cli\u003eFront panel 1\/4-inch stereo (TRS) headphone jack with amplifier and independent level control for output monitoring\u003c\/li\u003e\n\u003cli\u003eSwitchable balanced microphone XLR or 1\/4-inch inputs on Channel One\u003c\/li\u003e\n\u003cli\u003eSwitchable low noise +48V phantom power for microphone input\u003c\/li\u003e\n\u003cli\u003eSeparate green and red LED signal and clip indicators for each input channel\u003c\/li\u003e\n\u003cli\u003eSix level left and right main output metering including clip indicators\u003c\/li\u003e\n\u003cli\u003eBalanced left and right XLR main outputs\u003c\/li\u003e\n\u003cli\u003eMultiple units may be chained together for additional inputs\u003c\/li\u003e\n\u003cli\u003eRugged 1U rack mount steel case\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445286977582,"sku":"SARTMX822CE","price":204.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/MX822.jpg?v=1753273844"},{"product_id":"art-p16-16-ch-xlr-bal-patch-bay","title":"ART P16 - Sixteen Channel Balanced XLR Patchbay","description":"\u003ch2\u003eART P16 - 16ch Balanced XLR Patchbay\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART P16\u003c\/strong\u003e simplifies connecting and re-routing signals in your live or studio rack.\u003c\/p\u003e\n\u003cp\u003eIt lets you bring the rear-mounted XLR connections from your devices to a single convenient location, so you can patch and re-patch without having to crawl behind a rack. Since you can leave your processors permanently connected, the P16 also saves the connectors on your expensive studio equipment from wear and tear.\u003c\/p\u003e\n\u003cp\u003eIt features a shielded 1U steel chassis, a passive design so no power is required, reversible rack ears, and high-quality XLR connectors for long-term reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART P16 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 Channels of Balanced XLR Connections\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003cli\u003eFully Shielded Steel Enclosure\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART P16 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Balanced XLR (female front, male rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMRR:\u003c\/strong\u003e \u0026gt; -95 dB (typical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel to channel isolation:\u003c\/strong\u003e \u0026gt; -95 dB (typical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Steel 1U high, 19\" rack mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HWD):\u003c\/strong\u003e 44 x 483 x 89mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 lbs. (1.4 kg) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445287272494,"sku":"SARTP16","price":74.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/P16.jpg?v=1753274733"},{"product_id":"art-pdb-passive-direct-box","title":"ART PDB - Passive Direct Box","description":"\u003ch2\u003eART PDB - Passive Direct Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART PDB\u003c\/strong\u003e is a passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\n\u003cp\u003eThe input signal is sent to a transformer-isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\n\u003cp\u003eA switchable ground lift helps to eliminate hum, and switchable attenuation offers up to 40 dB of gain reduction.\u003c\/p\u003e\n\u003cp\u003eAs a fully passive design, the PDB doesn’t require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\n\u003cp\u003ePacked into a stage-proof steel enclosure, the PDB provides a high-fidelity connection to a mixer, PA system, or audio interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART PDB Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" TS Input and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (-20 dB, -40 dB) and Ground Lift\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART PDB Specifications:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive or Passive: \u003c\/strong\u003ePassive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs: \u003c\/strong\u003e1x 1\/4\" TS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs: \u003c\/strong\u003e1x XLR; 1x 1\/4\" TS Thru\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance: \u003c\/strong\u003e50 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance: \u003c\/strong\u003e600Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HWD): \u003c\/strong\u003e7.6 x 12.7 x 5.1cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445287338030,"sku":"SARTPDB","price":31.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/PDBtop.jpg?v=1754483261"},{"product_id":"art-phantom1ce","title":"ART Phantom 1 - 48V Phantom Power Supply","description":"\u003ch2\u003eART Phantom 1 - 48V Phantom Power Supply\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eART Phantom I \u003c\/strong\u003edelivers 48 volts of phantom power in a compact enclosure. It features an XLR input and output to connect between a microphone and preamp, and is powered by the included adapter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Phantom 1 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 18VAC (Adapter included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Phantom Power:\u003c\/strong\u003e 48VDC +\/- 2V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Connector:\u003c\/strong\u003e XLR female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput connector:\u003c\/strong\u003e XLR male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Noise: \u003c\/strong\u003e-71 dBV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 10Hz – 25kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Drain: \u003c\/strong\u003e14mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003e5.25 x 2.75 x 1.75 inches (130 x 74 x 45mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e1lb (450g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445287567406,"sku":"SARTPHANTOM1CE","price":51.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Phantom1top.jpg?v=1754572507"},{"product_id":"art-phantom-ii-2-channel-phantom-power-supply","title":"ART Phantom II Pro - Dual Phantom Power Supply","description":"\u003ch2\u003eART Phantom II Pro - Dual Phantom Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe Phantom II Pro delivers two channels of 48-volt phantom power in a compact enclosure. It can be powered by a 9-volt battery or external adapter (not included).\u003c\/p\u003e\n\u003cp\u003eIt features innovative low-power circuitry that provides over 10 hours of battery life under a full load on both channels. Its a great solution for mobile recording, especially with a bus-powered interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Phantom II Pro Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXLR connectors for balanced inputs and outputs\u003c\/li\u003e\n\u003cli\u003eLow power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended)\u003c\/li\u003e\n\u003cli\u003eCan be powered with an external power supply for operation from AC mains\u003c\/li\u003e\n\u003cli\u003eRugged extruded aluminum case with accessible battery compartment\u003c\/li\u003e\n\u003cli\u003eLED lighted On\/Off switch\u003c\/li\u003e\n\u003cli\u003eLow noise, low distortion circuitry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART Phantom II Pro Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Connections:\u003c\/strong\u003e Female XLR (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Connections: \u003c\/strong\u003eMale XLR (2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhantom Power Voltage:\u003c\/strong\u003e 48 Volts DC typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Limiting Resistors:\u003c\/strong\u003e 6.98k Ohms (1%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e V battery (ANSI-1604A type Alkaline recommended) or external 7.5-12V AC\/DC, \u0026lt; 150 mA supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Drain:\u003c\/strong\u003e 10 mA - no load \/ 45 mA - typical (full load - 2 microphones)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Life:\u003c\/strong\u003e \u0026gt; 10 hours with Alkaline battery - typical (full load)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HWD):\u003c\/strong\u003e 47 x 117 x 99mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.82 lbs \/ 0.37 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445287927854,"sku":"SARTPHANTOM2PRO","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Phantom2Pro.jpg?v=1754573130"},{"product_id":"art-promix","title":"ART ProMix -  Three Channel Battery \/ AC-Powered Mini Mixer","description":"\u003ch2\u003eART ProMix -  Three Channel Battery \/ AC-Powered Mini Mixer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART ProMix\u003c\/strong\u003e is a three-channel microphone mixer designed for connecting multiple mics to a larger mixer that only has a single input available.\u003c\/p\u003e\n\u003cp\u003eEach channel has an independent level control and switches to activate phantom power and a high-pass filter. The mixed signal is sent to a 1\/4” headphone \/ auxiliary output and a balanced XLR line output.\u003c\/p\u003e\n\u003cp\u003eFor additional flexibility, it can be powered by the included adapter or two 9-volt batteries for mobile applications.\u003c\/p\u003e\n\u003cp\u003eThe ProMix is a compact, convenient solution that can be used on its own in smaller setups, or to extend the connectivity of a larger system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART ProMix Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3x low-impedance XLR mic channels\u003c\/li\u003e\n\u003cli\u003e3x level controls\u003c\/li\u003e\n\u003cli\u003e3x phantom power on\/off DIP switches\u003c\/li\u003e\n\u003cli\u003e3x low-frequency cut on\/off DIP switches\u003c\/li\u003e\n\u003cli\u003eA low-impedance balanced XLR line output\u003c\/li\u003e\n\u003cli\u003eMono 1\/4” Phones\/Aux. output\u003c\/li\u003e\n\u003cli\u003eClip LED (fires 3 dB below the onset of clipping)\u003c\/li\u003e\n\u003cli\u003eOn\/off Power switch,with LED\u003c\/li\u003e\n\u003cli\u003ePower:12 V DC (Adapter included)\u003c\/li\u003e\n\u003cli\u003eOutput Phantom Power:12V (Using the 12V DC supply)\u003c\/li\u003e\n\u003cli\u003eOptional 2 x 9V Battery Power (Yields 18V Phantom Power)Low Cut:-3dB @ 100Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART ProMix Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gain\u003c\/strong\u003e: +60dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance\u003c\/strong\u003e: 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level\u003c\/strong\u003e: -14dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e: +14dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e: 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion\u003c\/strong\u003e: 0.0002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Cut\u003c\/strong\u003e: -3dB @ 100Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip Headroom\u003c\/strong\u003e: 3dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Phantom Power\u003c\/strong\u003e: 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: 12V DC (adapter) \/ 2x 9V (batteries)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 143 x 92 x 45mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.5lb (680g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288058926,"sku":"SARTPROMIXCE","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/ProMixtop.jpg?v=1754573813"},{"product_id":"art-prompaiice4-2ch-tubemic-amplifier","title":"ART Pro MPA-II - Two Channel Tube Preamp","description":"\u003ch2\u003eART Pro MPA-II - Two Channel Tube Preamp\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART Pro MPA II\u003c\/strong\u003e is a two-channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure.\u003c\/p\u003e\n\u003cp\u003eIt has 40 dB of input gain and a 20 dB boost, so it’s a great choice for low-output microphones. The plate voltage is switchable between normal operation for classic tube saturation, and high voltage for increased headroom and bandwidth. Variable impedance lets you tailor the response of the preamp to your microphone for additional tonal flexibility. It also features a variable low cut filter to eliminate rumble and tighten bass, and switches for phantom power phase reversal, and stereo or dual mono operation.\u003c\/p\u003e\n\u003cp\u003eA VU meter shows the output level, while a Tube Warmth LED meter shows the signal levels before they're affected by the Output volume control.\u003c\/p\u003e\n\u003cp\u003eThe rear panel has XLR mic inputs and both XLR and 1\/4” line outputs per channel, and the front panel has 1\/4” instrument inputs for using the Pro MPA II as a dual tube DI.\u003c\/p\u003e\n\u003cp\u003eExtend your recording setup with a versatile character preamp that offers two channels of classic tube warmth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Pro MPA II Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable Input Impedance For Flexible Microphone Voicing (150 ohms To 2400 ohms)\u003c\/li\u003e\n\u003cli\u003eSelectable Plate Voltage\u003c\/li\u003e\n\u003cli\u003eLarge VU Meters\u003c\/li\u003e\n\u003cli\u003eBacklit Function Switches\u003c\/li\u003e\n\u003cli\u003eDiscrete Class-A Input Microphone Preamplifier\u003c\/li\u003e\n\u003cli\u003eLow Noise at Lower Gain Settings\u003c\/li\u003e\n\u003cli\u003eExtremely Low Total Harmonic Distortion (THD)\u003c\/li\u003e\n\u003cli\u003eWide Frequency Response\u003c\/li\u003e\n\u003cli\u003eAdditional Front Mounted Instrument Input Jack\u003c\/li\u003e\n\u003cli\u003eSupports Mid\/Side Miking Technique\u003c\/li\u003e\n\u003cli\u003eOperates at +4dbm\/-10dbv Output\u003c\/li\u003e\n\u003cli\u003eSelectable Stereo\/Dual Operation of Output Controls\u003c\/li\u003e\n\u003cli\u003eAutomatic Instrument Input Selection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288091694,"sku":"SARTPROMPAIICE","price":399.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/ProMPAII.jpg?v=1754574623"},{"product_id":"art-scl2ce-stereo-compressor","title":"ART SCL2 - Two Channel Compressor \/ Limiter \/ Expander \/ Gate","description":"\u003ch2\u003eART SCL2 - Two Channel Compressor \/ Limiter \/ Expander \/ Gate\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART SCL2\u003c\/strong\u003e is a comprehensive dynamics processor in a 1U rackmount format. It offers two channels with VCA compression, limiting, expansion, gating, and sidechain inputs. Dual LED meters indicate gain reduction, output level, and gate threshold.\u003c\/p\u003e\n\u003cp\u003eDespite this versatility, a streamlined interface makes it easy to dial in the right settings for any task. Each channel has independent switches for bypass, hard-knee or soft-knee compression, manual or automatic control of attack and release, and to toggle between the expander or gate modes. A global switch changes between dual or linked stereo operation.\u003c\/p\u003e\n\u003cp\u003eDesigned for live sound, studio, and voiceover applications, the SCL2 is sonically transparent, packed with features, and simple to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART SCL2 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual Channel or Linked Stereo Operation\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS Side Chain Inserts\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eStereo Mode Balance Control\u003c\/li\u003e\n\u003cli\u003eLed Gain Reduction Meters\u003c\/li\u003e\n\u003cli\u003eSelectable Auto\/ Manual Attack\/Release\u003c\/li\u003e\n\u003cli\u003eSelectable Hard\/Soft Knee\u003c\/li\u003e\n\u003cli\u003ePrecise Led Level Meters\u003c\/li\u003e\n\u003cli\u003eInternal Power Supply\u003c\/li\u003e\n\u003cli\u003eAll Steel Chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART SCL2 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/Output Connections:\u003c\/strong\u003e ¼-inch TRS balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Chain Connections:\u003c\/strong\u003e ¼-inch TRS (Tip = Send, Ring = Receive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 10k Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 200 Ω (bal), 100 Ω (unbal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e +20 dBu Balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e +20 dBu Balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 10Hz to 40kHz, +\/- .5dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttack Time:\u003c\/strong\u003e .25mSec to 100mSec Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease Time:\u003c\/strong\u003e 100mSec to 3 Sec Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e \u0026lt;0.06% (typical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirements:\u003c\/strong\u003e 120 V 60 Hz\/50H, 10W max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5 x 48 x 15.2 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 lbs (1.9 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288419374,"sku":"SARTSCL2CE","price":175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/SCL2front.jpg?v=1754655549"},{"product_id":"art-t8","title":"ART T8 - Eight Channel Transformer \/ Isolator","description":"\u003ch2\u003eART T8 - Eight Channel Transformer \/ Isolator\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART T8\u003c\/strong\u003e Transformer \/ Isolator provides eight channels with high-performance transformers to reduce hum and ground loop noise, separating the input and output signal grounds for total isolation between two systems.\u003c\/p\u003e\n\u003cp\u003eThe transformers are wound for 1:1 unity gain, and have an extremely flat and wide frequency response. Even at high signal levels, they provide clean, transparent sound.\u003c\/p\u003e\n\u003cp\u003eEach channel features XLR, 1\/4\" TRS, and RCA connectors for all inputs and outputs. The steel enclosure has reversible rack ears, and the passive design doesn't require external power. Flexible and easy to integrate, the T8 is built for years of reliable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART T8 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-Channel Transformer \/ Isolator\u003c\/li\u003e\n\u003cli\u003e1x XLR Input and Output per Channel\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS Input and Output per Channel\u003c\/li\u003e\n\u003cli\u003e1x RCA Input and Output per Channel\u003c\/li\u003e\n\u003cli\u003e10 Hz - 50 kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003e0.01% THD (Typical at 1 kHz, +18 dBU)\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART T8 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive or Passive: \u003c\/strong\u003ePassive\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e8x Balanced XLR\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8x Balanced 1\/4\" TRS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8x RCA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e8x Balanced XLR\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8x Balanced 1\/4\" TRS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8x RCA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e10 Hz - 50 kHz (+\/- 0.5 dB @ +4 dBu)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e0.4 dB (100 kΩ Load)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5.5 dB (600Ω Load)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e0.01% (Typical @ 1 kHz, +18 dBu)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u0026lt; 0.05% @ 100 Hz, +24 dBu\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePhase Error:\u003c\/strong\u003e \u0026lt; 5° (20 Hz - 20 kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 90 dB (Typical)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eCMRR: \u003c\/strong\u003e60 dB (Typical)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDimensions (DWH):\u003c\/strong\u003e 9.5 x 48.3 x 4.45 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.75 lbs \/ 1.7 kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288747054,"sku":"SARTT8","price":149.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/T8front.jpg?v=1754659344"},{"product_id":"art-tubempstv3ce-tube-mp-studio-v3","title":"ART Tube MP Studio V3 - Tube Preamp with V3 Presets","description":"\u003ch2\u003eART Tube MP Studio V3 - Tube Preamp with V3 Presets\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART Tube MP Studio V3\u003c\/strong\u003e offers all of the features of the original Tube MP with versatile onboard presets to easily dial in a great tone.\u003c\/p\u003e\n\u003cp\u003eV3 stands for Variable Valve Voicing, and refers to the sixteen presets in three overlapping groups: Neutral, Warm, and OPL. Each has a precisely voiced EQ curve, Warm presets add tube saturation, and OPL presets engage Output Protection Limiting for dynamic control of loud signals and big transients.\u003c\/p\u003e\n\u003cp\u003eEach preset has a suggested application, but they all have a unique character, so any could be an inspiring match for your performance. Theres also a Flat preset for the classic sound of the original Tube MP.\u003c\/p\u003e\n\u003cp\u003eLike the original, the Tube MP Studio V3 has XLR and 1\/4 connections with variable gain and switchable boost, phantom power, and phase reversal.\u003c\/p\u003e\n\u003cp\u003eFast and flexible, the Tube MP Studio V3 is a mic preamp and instrument DI designed for maximum tone with minimum tweaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Tube MP Studio V3 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides Superior Preamplification for:\u003cbr\u003eMicrophones, Instruments and Line Level Sources\u003c\/li\u003e\n\u003cli\u003eV3™ – Variable Valve Voicing\u003c\/li\u003e\n\u003cli\u003eOPL™ – Output Protection Limiting\u003c\/li\u003e\n\u003cli\u003eHand Selected 12AX7A Provides 70dB of Gain Smooth,\u003cbr\u003eWarm and Fat Sound Quality\u003c\/li\u003e\n\u003cli\u003eVariable Input and Output Gain Controls\u003c\/li\u003e\n\u003cli\u003eExcellent as a Tube DI\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4″ Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003e+48 Volts of Phantom Power\u003c\/li\u003e\n\u003cli\u003ePhase Reversal Switch\u003c\/li\u003e\n\u003cli\u003ePortable, All Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288779822,"sku":"SARTTUBEMPSTV3CE","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/TubeMPStudioV3top.jpg?v=1754662270"},{"product_id":"art-usbmixce","title":"ART USB Mix - Mini USB Recording Mixer","description":"\u003ch2\u003eART USB Mix - Mini USB Recording Mixer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART USB Mix\u003c\/strong\u003e is a portable analog mixer and class-compliant digital audio interface.\u003c\/p\u003e\n\u003cp\u003eChannel 1 features an XLR \/ 1\/4 combo jack that can accept mic, line, or instrument signals. It also has switchable phantom power to work with condenser mics. Channels 2 and 3 are configured as a stereo pair with 1\/4 line inputs.\u003c\/p\u003e\n\u003cp\u003eYou can switch between monitoring only the mixer inputs, or blend them with the audio playback from your recording software. There are stereo outputs for studio monitors, a headphone output with an independent volume control, and a USB 2.0 connection for your computer or mobile device.\u003c\/p\u003e\n\u003cp\u003eEasy to set up and use, the USB Mix is a compact and convenient entry point into digital recording, and a convenient bus-powered solution for mobile tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART USB Mix Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB powered, no external power supply needed when used with a computer\u003c\/li\u003e\n\u003cli\u003eBalanced XLR or unbalanced 1\/4-inch Instrument inputs with switchable impedance\u003c\/li\u003e\n\u003cli\u003eSwitchable low noise +48V phantom power\u003c\/li\u003e\n\u003cli\u003eBalanced 1\/4-inch TRS inputs for stereo or mono line-level sources\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS output jacks work with balanced or unbalanced lines\u003c\/li\u003e\n\u003cli\u003eStereo 1\/4-inch TRS headphone jack with independent level control for output monitoring\u003c\/li\u003e\n\u003cli\u003eIndependent controls for both sets of inputs, main output, and headphone monitor\u003c\/li\u003e\n\u003cli\u003eGreen\/Red LED signal\/clip indicator\u003c\/li\u003e\n\u003cli\u003eSwitchable assignment of USB playback to channels 2 and 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 20 Hz - 20 kHz (+0, -1 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion\u003c\/strong\u003e: \u0026lt;0.01% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level\u003c\/strong\u003e: +4dBu (XLR input), +14dBu (1\/4\" input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e: +14dBu (Main Mix Outputs), +13dBu (Monitor output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Connections\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eXLR balanced \/ 1\/4\" unbalanced \"Combo\" jack (ch1 input)\u003c\/li\u003e\n\u003cli\u003e1\/4\" balanced or unbalanced (Ch2-Ch3 inputs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Connections\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e1\/4\" TRS balanced (Main Mix outputs)\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS stereo (Monitor output)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e240k Ω (Inst-HiZ), 20k Ω (Line) (Ch 1, Ch2-Ch3 1\/4\" inputs)\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 4k Ω (Ch1 XLR input)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e\u0026lt;1k Ω (balanced 1\/4\"), \u0026lt;500 Ω (unbalanced 1\/4\")\u003c\/li\u003e\n\u003cli\u003e100 Ω (Monitor output)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMRR\u003c\/strong\u003e: \u0026gt; 54 dB typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Response:\u003c\/strong\u003e All connections are phase coherent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal to Noise Ratio\u003c\/strong\u003e: \u0026gt; 90 dB typical (Ref 0 dBu)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e: -120 dBu typical (XLR balanced, max gain), -100 dBu typical (1\/4\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gain (In to Main Out)\u003c\/strong\u003e: +53dB (XLR), +32dB (1\/4\") Ch1 input, +10dB (1\/4\") (Ch2-Ch3 inputs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gain (In to USB)\u003c\/strong\u003e: +44dB (XLR), +23dB (1\/4\") (Ch1 input), +1dB (1\/4\") (Ch2-Ch3 inputs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Gain (USB to Out)\u003c\/strong\u003e: +14dB (Main Mix outputs), +13dB (Monitor output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhantom Power\u003c\/strong\u003e: Switch selectable, +48V DC, filtered, current limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\/D-D\/A\u003c\/strong\u003e: 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer, 0.4 ms A\/D latency @ 44.1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComputer Interface\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eUSB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SE\u003c\/li\u003e\n\u003cli\u003eMac OS 9.1 \/ OS X computers with native USB support, Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Type\u003c\/strong\u003e: All steel black finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirements\u003c\/strong\u003e: 5.0V DC @ \u0026lt;500 mA (external) or USB bus powered @ 150 mA typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 1.6\" x 4.0\" x 4.75\" (41mm x 101mm x 121mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.1 lbs (0.5 kg), Weight includes power supply and USB cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288812590,"sku":"SARTUSBMIXCE","price":74.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/USBMix.jpg?v=1754664203"},{"product_id":"art-x-direct-professional-active-di-box","title":"ART X-Direct - Active Direct Box","description":"\u003ch2\u003eART X-Direct - Active Direct Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART XDirect\u003c\/strong\u003e is an active direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\n\u003cp\u003eThe input signal is sent to a transformer-isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage. Unique among ART DI boxes, XDirect models feature both 1\/4\" TRS and XLR inputs for expanded connectivity.\u003c\/p\u003e\n\u003cp\u003eSimple and durable, the XDirect is a compact DI in a rugged aluminum enclosure with a versatile feature set. Front panel switches engage up to 40 dB of attenuation to accommodate high-level signals, and a low-pass Bessel filter to eliminate high-frequency interference. Rear switches activate a ground lift to reduce hum, and invert the signal polarity to resolve phase issues such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART X-Direct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" TRS and XLR Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Thru Connector\u003c\/li\u003e\n\u003cli\u003eTransformer-Isolated Balanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eSwitchable Low-Pass Filter, Ground Lift, and Phase Invert\u003c\/li\u003e\n\u003cli\u003ePowered by 9-Volt Battery (250+ Hours) or Phantom Power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART X-Direct Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 10Hz –100kHz, +\/-.5dB @ +0dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e+6dBu (battery powered) \u003c\/li\u003e\n\u003cli\u003e+14dBu (phantom powered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e \u003cspan\u003e+4 dBu above Attenuation Setting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e \u0026gt;100dB typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Connections:\u003c\/strong\u003e 1\/4” TRS and XLR female unbalanced, 470k Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Connection:\u003c\/strong\u003e XLR male balanced, \u0026lt;600 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD: \u003c\/strong\u003e\u0026lt;.05 typical\u0026gt;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Type\/Response:\u003c\/strong\u003e Switchable, Low Pass, -3dB @ 30kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Attenuation: \u003c\/strong\u003eSwitchable, (0dB, -20dB, -40dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Phase: \u003c\/strong\u003eSwitchable, Normal\/Invert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift: \u003c\/strong\u003eSwitchable, fully isolates inputs from chassis and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirements:\u003c\/strong\u003e 9V @3.5ma (internal battery) or 18VDC–48VDC @9.5ma (phantom power) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e44.5 x 107 x 89mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e0.75 lbs (0.34kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31445288878126,"sku":"SARTXDIRECT","price":41.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/XDirect.jpg?v=1757065023"},{"product_id":"art-cleanbox-pro-stereo-converter-2-way","title":"ART CleanBox Pro - Balanced\/Unbalanced Level Converter","description":"\u003ch2\u003eART CleanBox Pro - Balanced\/Unbalanced Level Converter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART CleanBox Pro\u003c\/strong\u003e is a convenient solution for connecting consumer A\/V and professional audio equipment.\u003c\/p\u003e\n\u003cp\u003eIt provides two channels of unbalanced-to-balanced level conversion, and two channels of balanced-to-unbalanced level conversion. The balanced signals use XLR connectors, the unbalanced signals use stereo RCA and 1\/8” TRS jacks, and there are independent volume controls for both the balanced and unbalanced output levels.\u003c\/p\u003e\n\u003cp\u003eBalanced lines offer increased immunity to external electrical noise and hum, and are the preferred method of connecting audio gear, especially over long cable runs. Need to get the analog output from a laptop, phone, or disc player to a mixer or PA system, or vice-versa? This is your box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART CleanBox Pro Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-Channel Balanced \/ Unbalanced Level Convertor\u003c\/li\u003e\n\u003cli\u003e2x XLR Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eStereo RCA and 1\/8\" Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eIndependent Level Controls for Balanced \/ Unbalanced Outputs\u003c\/li\u003e\n\u003cli\u003ePower Adapter Included\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31663010512942,"sku":"SARTCLEANBOXPROCE","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/CleanBoxProfronttop.jpg?v=1753181151"},{"product_id":"art-dual-x-direct","title":"ART Dual X Direct - Professional 2-Channel Active DI Box","description":"\u003ch2\u003eART Dual X Direct - Professional 2-Channel Active DI Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART DualXDirect\u003c\/strong\u003e is a 2-channel active direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\n\u003cp\u003eEach input signal is sent to a transformer-isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage. Unique among ART DI boxes, XDirect models feature both 1\/4\" TRS and XLR inputs for expanded connectivity.\u003c\/p\u003e\n\u003cp\u003eFront panel switches engage 30 dB of attenuation to accommodate high-level signals, and a ground lift to reduce hum.\u003c\/p\u003e\n\u003cp\u003eThe active circuitry can operate on phantom power or for over 100 hours on a new 9-volt battery. Active DIs are often a great match for sources like guitars and basses with passive pickups, or acoustic guitars with piezo pickups and no preamp.\u003c\/p\u003e\n\u003cp\u003eSimple and durable, the DualXDirect is a compact DI in a rugged aluminum enclosure with two independent channels and a streamlined feature set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Dual X Direct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS \/ XLR Combo Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable 30dB Attenuation and Ground Lift per Channel\u003c\/li\u003e\n\u003cli\u003ePowered by 9-Volt Battery (100+ Hours) or Phantom Power\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":31663010676782,"sku":"SARTDUALXDIRECT","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/DualXDirect.jpg?v=1753183578"},{"product_id":"art-macromixce-4-channel-mixer","title":"ART MacroMix - Four Channel Line Mixer","description":"\u003ch2\u003eART MacroMix - Four Channel Line Mixer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART MacroMix\u003c\/strong\u003e is a four-channel line mixer. Channels 1 and 2 have stereo RCA inputs, channel 4 has a 1\/4 input, and channel 3 has both. Its ideal for connecting multiple sources such as CD and DVD players, phono preamps and DJ mixers, or cassette decks.\u003c\/p\u003e\n\u003cp\u003eEach channel has an independent volume control, and the mix is sent to a stereo RCA output and a stereo 1\/4 headphone \/ line output for monitoring.\u003c\/p\u003e\n\u003cp\u003ePerfect for unbalanced line signals and consumer A\/V equipment, the MacroMix can be used as a standalone solution or to extend the connectivity of a larger mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART MacroMix Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour input channels, Ch. 1 and 2 have dual L\/R RCA inputs, with Ch. 3 you have a choice of one 1\/4” or dual L\/R RCA inputs and Ch 4 has a 1\/4” unbalanced input\u003c\/li\u003e\n\u003cli\u003eFour Level controls, one for each channel\u003c\/li\u003e\n\u003cli\u003eDual L\/R RCA Output connectors\u003c\/li\u003e\n\u003cli\u003e1\/4” Line Out\/Stereo Headphone output jack\u003c\/li\u003e\n\u003cli\u003eActive preamplification and mixing circuitry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART MacroMix Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eInputs: \u003c\/span\u003e\u003c\/strong\u003e1\/4\", RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs: \u003c\/strong\u003eRCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance: \u003c\/strong\u003e\u003cspan\u003e10K Ω\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Gain:\u003c\/strong\u003e \u003cspan\u003e+40 dB\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e \u003cspan\u003e\u0026lt;0.008%\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal to Noise Ratio:\u003c\/strong\u003e \u003cspan\u003e\u0026gt; 90dB\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e \u003cspan\u003e12 V DC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (LWH):\u003c\/strong\u003e \u003cspan\u003e14.3 x 9.2 x 4.5 cm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e \u003cspan\u003e1.6 lbs (725 g)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default","offer_id":44268832489650,"sku":"SARTMACROMIXCE","price":62.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/MacroMixtop.jpg?v=1756993572"},{"product_id":"art-usbdualpreps-2ch-preamp-with-usb","title":"ART USB Dual Pre PS - USB Dual Preamp \u0026 Computer Interface","description":"\u003ch2\u003eART USB Dual Pre PS - USB Dual Preamp \u0026amp; Computer Interface\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART USB Dual Pre PS\u003c\/strong\u003e is a two-channel preamp and audio interface thats ready to record anywhere you find inspiration.\u003c\/p\u003e\n\u003cp\u003eEach channel has a combo jack for XLR and 1\/4 connections, and up to 48 dB of input gain to boost mic, line, and instrument-level signals. The rear panel has a phantom power switch, a level control for the 1\/4 outputs and headphones, and a blend control to mix the input signals and USB playback for true zero-latency monitoring.\u003c\/p\u003e\n\u003cp\u003eIt can be powered by USB, a 9-volt battery, or an optional external adapter. The expected battery life is approximately 20 hours with phantom power, and over 50 hours without. Using a battery or adapter will reduce the power draw on the host device for extended recording time when tracking remotely.\u003c\/p\u003e\n\u003cp\u003eIts class compliant, so no driver software is required, and the metal enclosure is compact and rugged, so the interface is portable and protected. Whether in your home studio or a mobile setup, the USB Dual Pre will capture great sound wherever you record.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART USB Dual Pre PS Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Connectivity to Desktop and Laptop Computers\u003c\/li\u003e\n\u003cli\u003eLow Noise Fully Balanced XLR and 1\/4-inch TRS Combi Inputs\u003c\/li\u003e\n\u003cli\u003eUp to 48 dB of Clean Gain n Built-in Low Noise Phantom Power Supply\u003c\/li\u003e\n\u003cli\u003eLatency Free Monitoring Mix and Level Controls\u003c\/li\u003e\n\u003cli\u003eIndependent Channel Gain Controls\u003c\/li\u003e\n\u003cli\u003e1\/4-inch TRS Balanced Monitor and 1\/8-inch Headphone Monitor Outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlexible 3-way Power from USB, External Supply, or 9 Volt Battery\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default","offer_id":44268838486194,"sku":"SARTUSBDUALPREPS","price":82.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/USBDualPre.jpg?v=1754663395"},{"product_id":"art-dti-hum-eliminator-2","title":"ART DTI - Dual Transformer \/ Isolator","description":"\u003ch2\u003eART DTI - Dual Transformer \/ Isolator\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART DTI \u003c\/strong\u003eDual Transformer \/ Isolator uses a pair of high-performance transformers to reduce hum and ground loop noise, separating the input and output signal grounds for total isolation between two systems.\u003c\/p\u003e\n\u003cp\u003eThe transformers are wound for 1:1 unity gain, and have an extremely flat and wide frequency response. Even at high signal levels, they provide clean, transparent sound.\u003c\/p\u003e\n\u003cp\u003eWith XLR, 1\/4” TRS, and RCA connectors on all inputs and outputs, the DTI is flexible and easy to integrate. Featuring a rugged aluminum enclosure and a passive design that doesn’t require external power, the DTI is built for years of reliable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART DTI Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x XLR Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003e2x RCA Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003e10 Hz - 50 kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003e0.01% THD (Typical at 1 kHz, +18 dBU)\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART DTI Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e2x Balanced XLR\u003c\/li\u003e\n\u003cli\u003e2x Balanced \/ Unbalanced 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003e2x RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eOutputs:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e2x Balanced XLR\u003c\/li\u003e\n\u003cli\u003e2x Balanced \/ Unbalanced 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003e2x RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eFrequency Response:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e10 Hz - 50 kHz (+\/- 0.5 dB @ +4 dBu)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eTHD:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e0.01% (Typical @ 1 kHz, +18 dBu)\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 0.05% @ 100 Hz, +24 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eInsertion Loss:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e0.4 dB (100 kΩ Load)\u003c\/li\u003e\n\u003cli\u003e5.5 dB (600Ω Load)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eDimensions (HWD):\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e8.9 cm x 10.7 cm x 4.45 cm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eWeight:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.75 lbs \/ 340 g\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":56211889193334,"sku":"SARTDTI","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/DTIfrontangle.jpg?v=1756996406"},{"product_id":"art-splitmix4-4-ch-passiv-mixer","title":"ART SplitMix 4 - Four Channel Splitter\/Mixer","description":"\u003ch2\u003eART SplitMix 4 - Four Channel Splitter\/Mixer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART SplitMix4\u003c\/strong\u003e is a four-channel line mixer, splitter, and level attenuator with a versatile hybrid design. Split one input to four outputs. Mix four inputs to one output. Send four stereo sources to their own stereo outputs with independent level controls. Or do any combination of the above.\u003c\/p\u003e\n\u003cp\u003eThe fully passive design means that there is no active circuitry to add noise or distortion, and that no power is required.\u003c\/p\u003e\n\u003cp\u003eAll connections are 1\/4” stereo TRS with intelligent switching. Plugging into a mix input removes the channel from the splitter bus, and plugging into a splitter output removes the channel from the mix bus. Mono or stereo operation is determined by the cable you connect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART SplitMix 4 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour Stereo Input Channels\u003c\/li\u003e\n\u003cli\u003eStereo Output\u003c\/li\u003e\n\u003cli\u003eIndependent stereo level controls are provided on each channel\u003c\/li\u003e\n\u003cli\u003ePassive Design (No Power Supply Required)\u003c\/li\u003e\n\u003cli\u003eOver 90dB of Attenuation\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART SplitMix 4 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs: \u003c\/strong\u003e\u003cspan\u003e1\/4\" TRS stereo\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eOutputs:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1\/4\" TRS stereo\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eInput Impedance:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e25 k -100k Ω\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eOutput Impedance:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1 k – 4 k Ω\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eFrequency Response:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e20 Hz – 20k Hz, +\/-1dB\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eTHD:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u0026lt;0.005% @ 1 kHz (typical)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eChannel Separation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u0026gt; 90dB (typical)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003ePower:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e N\/A, \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFully Passive\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eDimensions (HWD):\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4.7 x 11.7 x 10.4 cm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eWeight:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.84 lbs \/ 0.38 kg\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":56211889324406,"sku":"SARTSPLITMIX4","price":51.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/SplitMix4front.jpg?v=1757002976"},{"product_id":"art-usbphonoplusps-usb-audio-interface-incl-phonopreamp","title":"ART USB Phono Plus PS - Phono Preamp and Audio Interface","description":"\u003ch2\u003eART USB Phono Plus PS - Phono Preamp and Audio Interface\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART USB Phono Plus\u003c\/strong\u003e is a complete hardware solution for making digital recordings from your records.\u003c\/p\u003e\n\u003cp\u003eART has decades of experience in designing phono preamps, and the USB Phono Pre offers the great sound, low noise, and essential features that have established the DJ Pre II as one of ART's most popular products.\u003c\/p\u003e\n\u003cp\u003eIt adds extended digital connectivity and an integrated USB audio interface. In addition to stereo RCA inputs and outputs, it features S\/PDIF and optical inputs, plus an optical output. Connect the USB port to your computer and record better than CD-quality sound to any digital audio workstation software. The headphone output lets you monitor the preamp input, the computer playback, or both together, and has an independent level control so you can adjust your listening volume without affecting the recording.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART USB Phono Plus Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by external power supply or directly via USB port\u003c\/li\u003e\n\u003cli\u003eFully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record.\u003c\/li\u003e\n\u003cli\u003eWorks with Windows 98SE\/ME\/2000\/XP\/Vista\/7 USB audio device drivers as well as Apple OS9.1\/OS-X computers with native USB support.\u003c\/li\u003e\n\u003cli\u003eHoused in an all aluminum black anodized case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":56211889422710,"sku":"SARTUSBPHONOPLUSPS","price":81.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/USBPhonoPlus.jpg?v=1756995196"},{"product_id":"art-z-direct-passive-di-box","title":"ART Z-Direct - Passive Direct Box","description":"\u003ch2\u003eART Z-Direct - Passive Direct Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eART ZDirect\u003c\/strong\u003e is a passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\n\u003cp\u003eThe input signal is sent to a transformer-isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\n\u003cp\u003eSimple and durable, the ZDirect is a compact DI in a rugged aluminum enclosure with a versatile feature set. Front panel switches engage up to 40 dB of attenuation to accommodate high-level signals, and a low-pass Bessel filter to eliminate high-frequency interference. Rear switches activate a ground lift to reduce hum and invert the signal polarity to resolve phase issues, such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eART Z-Direct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" TRS Input and Thru Connector\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (0 dB, -20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Low-Pass Filter, Ground Lift, and Phase Invert\u003c\/li\u003e\n\u003cli\u003ePassive Design - No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eART Z-Direct Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs: \u003c\/strong\u003e\u003cspan\u003e1x 1\/4\" TRS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e \u003cspan\u003e1x XLR; \u003c\/span\u003e\u003cspan\u003e1x 1\/4\" TRS Thru\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e \u003cspan\u003e50 kΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e \u003cspan\u003e600Ω\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e \u003cspan\u003eAttenuator (0 dB, -20 dB, -40 dB); \u003c\/span\u003e\u003cspan\u003eFilter; \u003c\/span\u003e\u003cspan\u003eGround Lift; \u003c\/span\u003e\u003cspan\u003ePhase Invert\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e \u003cspan\u003e30 kHz Low-Pass\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e \u003cspan\u003e10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e \u003cspan\u003e0.01% Typical @ 1kHz, +18 dBu\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HWD):\u003c\/strong\u003e \u003cspan\u003e4.45 cm x 10.7 cm x 8.9 cm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e \u003cspan\u003e0.75 lbs \/ 340 g\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":56211889684854,"sku":"SARTZDIRECT","price":29.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/ZDirect.jpg?v=1757003267"}],"url":"https:\/\/studiocare.com\/collections\/art\/ancillary-studio-broadcast_transformers.oembed","provider":"Studiocare","version":"1.0","type":"link"}