{"title":"CB Electronics","description":"","products":[{"product_id":"cbe-tmc","title":"CBE TMC-1 \u0026 A-Mon Analogue Monitor Controller for Atmos","description":"\u003ch2\u003eCBE TMC-1\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCBE TMC-1\u003c\/strong\u003e is a A-Mon Analogue Monitor Controller for Atmos, 7.1, 5.1 and Stereo. The TMC-1 is designed as a desktop unit but may be mounted flush with the desktop. The unit should be sited in any convenient position away from sources of moisture or excessive heat. The TFT display brightness may be adjusted via the Setup menu to optimise viewing under different lighting conditions.\u003c\/p\u003e\n\u003cp\u003ePower the TMC-1 via the USB cable supplied. The TMC-1 may be powered directly from the USB power supply or connected directly to the DAW. The TMC-1 will recognize and configure the connected monitor system to the last TMC-1 setting on power up. If no monitoring hardware is not discovered, then No XMON, No Penta\/DAD, No D-Mon or No A-mon will be displayed in the top right of the TFT Display. Once good communications are established, this will then be replaced as selected in the Setup Menu.\u003c\/p\u003e","brand":"CB Electronics","offers":[{"title":"Default Title","offer_id":31467381882926,"sku":"SCBETMC1.","price":1300.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/cb-tmc-1-_5.jpg?v=1578922956"},{"product_id":"cbe-xpatch-32-32-x-32-digitally-controlled-analogue-audio-patchbay","title":"CBE XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio Patchbay","description":"\u003ch2\u003eCBE XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio Patchbay\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCBE XPatch-32\u003c\/strong\u003e is a digitally controlled analogue patchbay. XPatch-32 system is controlled by the XPatch-32 program via USB. This allows for complex routings in seconds, and also the ability to save, store and recall routing settings from any of your sessions. Another useful features of the X Patch 32 that any input can be sent to multiple outputs allowing for signals to be sent to multiple locations, useful for recording live performances, or enabling multiple signal chains from a single input. The XPatch-32 design is based on the A-Mon \/ I-Mon and shares the I\/O and CPU cards, allowing for input and output muting and even gain control.\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eIndividual Channel Level Control \u0026amp; Mutes of inputs \u0026amp; outputs\u003c\/h4\u003e\n\u003cp\u003eThe major problem with an electronic patch is cross-talk especially between signals at different levels. The X-Patch 32 inherits input and output gain control from the A-Mon\/I-Mon, the input gain control allows levels within the patch to be optimized minimizing cross-talk. Unused inputs and outputs are muted further reducing cross-talk.\u003c\/p\u003e\n\u003ch4\u003eMetering of Inputs \u0026amp; Outputs\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e The X-Patch-32 inherits 8 channels of metering from the A-Mon\/I-Mon, these are connected in parallel with outputs 25 - 32 and can be viewed in the Mac\/Windows GUI.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eConnect a TMC-1 or 2 to use as a Monitor Controller with Electronics patch\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eWhen used with a TMC-1 or TMC-2 part of the XPatch-32 may be configured as the monitoring system for any format from stereo up to 7.1.4. The channel count, cue sends and talkback and listen back are user configurable allowing for the XPatch-32 to split between monitoring and electronic patch to suit user requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e32x32 crosspoint routing\u003c\/li\u003e\n\u003cli\u003eZero crossing switching (\"Click-Less\")\u003c\/li\u003e\n\u003cli\u003e2 Input combo XLR line level\/ 1\/4 inch jack DI input \u003c\/li\u003e\n\u003cli\u003e2 output front panel XLR connections\u003c\/li\u003e\n\u003cli\u003eFront panel headphone monitoring\u003c\/li\u003e\n\u003cli\u003eCreate, store and recall routings\u003c\/li\u003e\n\u003cli\u003eAny input can connect to multiple outputs\u003c\/li\u003e\n\u003cli\u003eOSX and Windows compatible software \u003c\/li\u003e\n\u003cli\u003eSoftware and firmware updates via USB\u003c\/li\u003e\n\u003cli\u003e8 channels of metering \u003c\/li\u003e\n\u003cli\u003e+4\/-10 dBm line level selection on every input and output\u003c\/li\u003e\n\u003cli\u003e5 Pin MIDI input\u003c\/li\u003e\n\u003cli\u003eI\/O on DB-25 connectors - Tascam format\u003c\/li\u003e\n\u003cli\u003eunused I\/) are muted to minimise crosstalk\u003c\/li\u003e\n\u003cli\u003eFootswitch input or selection of snapshots (pre-sets)\u003c\/li\u003e\n\u003cli\u003eDesigned by CB Electronics multi-award-winning designer Colin Broad\u003c\/li\u003e\n\u003cli\u003eLoad and save predefined signal paths\u003c\/li\u003e\n\u003cli\u003eConnect a TMC-1 or TMC-2 to use as a monitor controller with electronic patch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":37430038954162,"sku":"SCBEXPAT32","price":2400.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SCBEXPAT32-2.jpg?v=1604663717"},{"product_id":"cbe-xpatch-64-64-x-64-digitally-controlled-analogue-audio-patchbay","title":"CBE XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio Patchbay","description":"\u003ch2\u003eCBE XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio Patchbay\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCBE XPatch-64\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a digitally controlled analogue patchbay. XPatch-64 system is controlled by the XPatch-64 program via USB. This allows for complex routings in seconds, and also the ability to save, store and recall routing settings from any of your sessions. Another useful features of the X Patch 64 that any input can be sent to multiple outputs allowing for signals to be sent to multiple locations, useful for recording live performances, or enabling multiple signal chains from a single input. The XPatch-64 design is based on the A-Mon \/ I-Mon and shares the I\/O and CPU cards, allowing for input and output muting and even gain control.\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eIndividual Channel Level Control \u0026amp; Mutes of inputs \u0026amp; outputs\u003c\/h4\u003e\n\u003cp\u003eThe major problem with an electronic patch is cross-talk especially between signals at different levels. The X-Patch 64 inherits input and output gain control from the A-Mon\/I-Mon, the input gain control allows levels within the patch to be optimized minimizing cross-talk. Unused inputs and outputs are muted further reducing cross-talk.\u003c\/p\u003e\n\u003ch4\u003eMetering of Inputs \u0026amp; Outputs\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e The X-Patch-64 inherits 8 channels of metering from the A-Mon\/I-Mon, these are connected in parallel with outputs 57 - 64 and can be viewed in the Mac\/Windows GUI.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eConnect a TMC-1 or 2 to use as a Monitor Controller with Electronics patch\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eWhen used with a TMC-1 or TMC-2 part of the XPatch-64 may be configured as the monitoring system for any format from stereo up to 7.1.4. The channel count, cue sends and talkback and listen back are user configurable allowing for the XPatch-64 to split between monitoring and electronic patch to suit user requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e64x64 Crosspoint routing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZero crossing switching (\"click-less\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFront panel headphone monitoring \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreate, store \u0026amp; recall routing (snapshots)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAny input can connect to multiple outputs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLoad an save predefined signal paths \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOSX \u0026amp; Windows compatible software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8 channels of metering \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5 Pin IDI input (pc commands)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGain control on every output \u0026amp; inputs 57-64\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eunused I\/O are muted to minimise crosstalk\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTablet\/iPhone selection of snapshots \u0026amp; paths with touchosc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ehigh impedance input card option for inputs 57-64\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":37430038986930,"sku":"SCBEXPAT64","price":5000.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SCBEXPAT64-1.jpg?v=1604666643"},{"product_id":"cbe-xp-relay-16-x-16-digitally-controlled-fully-analogue-audio-relay-patch-bay","title":"CBE XP-Relay - 16 X 16 Digitally controlled fully analogue audio relay patch bay","description":"\u003ch2\u003eCBE XP-Relay - 16 X 16 Digitally controlled fully analogue audio relay patch bay\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCB Electronics XP-Relay\u003c\/strong\u003e is a 16x16 digitally controlled analogue relay patch-bay.\u003c\/p\u003e\n\u003cp class=\"\"\u003eThe XP-Relay is housed in a 1U rack mounting box and includes a 48v linear power supply with remote controllable phantom switching on every input. A configuration setting will enable\/disable the phantom completely on any input(s). When Phantom is Off there is a direct connection between input and output. When Phantom is enabled there is a blocking capacitor between input and output to isolate the 48v.\u003c\/p\u003e\n\u003cp class=\"\"\u003eUp to 4 XPatch or XP-Relay units can be controlled by the XPatch4 software which allows units to be combined in different ways including using two units as stereo pairs, for example two XP-Relay 16x16’s can be controlled as a single stereo 16x16 relay based patch panel.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRelay switching for direct connection\u003c\/li\u003e\n\u003cli\u003eSealed relays more reliable than open patch bay contacts\u003c\/li\u003e\n\u003cli\u003eSuitable for low or high level signals \u003c\/li\u003e\n\u003cli\u003eOnboard+48v Phantom available from linear PSU\u003c\/li\u003e\n\u003cli\u003ePhantom pass through when onboard phantom disabled \u003c\/li\u003e\n\u003cli\u003eIntegration with XOATCH4 control software\u003c\/li\u003e\n\u003cli\u003eCan be used standalone\u003c\/li\u003e\n\u003cli\u003eIntegrate with the XOATCH-32\/64\/96\u003c\/li\u003e\n\u003cli\u003eCombine two units for up to 16 x 16 Stereo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default Title","offer_id":41973717958834,"sku":"SCBEXPRELAY16X16","price":2200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SCBEXPRELAY16X16.jpg?v=1652870464"},{"product_id":"cb-electronics-tc-5b-midi-timecode-generator-reader-converter-ltc-midi-usb-gpio-real-time-clock","title":"CB Electronics TC-5B - MIDI Timecode Interface","description":"\u003ch2\u003eCB Electronics TC-5B - MIDI Timecode Interface \u003c\/h2\u003e\n\u003cp class=\"\"\u003eThe \u003cstrong\u003eCB Electronics TC-5B\u003c\/strong\u003e-Midi\/RS-422 is a professional MTC\/LTC interface with LED display, Video Sync, Word Clock input and USB port. The TC-5B-Midi\/RS-422 is designed to be equally at home in Audio, Video and Lighting Environments, applications include Digital Audio Workstations, Non Linear Video Editors, Mixing Consoles, Show Control and Lighting Control. Replacement for MIF4. The dual midi interface allows for the control\/setup software to be run at the same time as a user application.\u003c\/p\u003e\n\u003cp class=\"\"\u003eAs a test tool the TC-5B-Midi\/RS-422 can check the frequency of Timecode, MTC, Video and Word Clock. The TC-5B-Midi\/RS-422 can also compare LTC with MTC.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7 GPIO+9GPI, USB, GPO Events\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003eLTC Timecode In\/Out (XLR)\u003c\/li\u003e\n\u003cli\u003eDual Channel USB-MIDI Interface , bi-directional, converts to MTC and LTC\u003c\/li\u003e\n\u003cli\u003eLTC\/MTC generator controlled from front panel or by MMC from USB or MIDI\u003c\/li\u003e\n\u003cli\u003eMac\/Windows Event Control\/Setup Software\u003c\/li\u003e\n\u003cli\u003eLarge (0.56”\/ 14 mm) Ultra Bright LED Display\u003c\/li\u003e\n\u003cli\u003eWord Clock or SD\/HD Video Sync Reference\u003c\/li\u003e\n\u003cli\u003e1U Rack mount brackets available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTC-5B-Mid\u003c\/strong\u003ei: Midi In\/Out (5 pin Din)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTC-5B-RS422\u003c\/strong\u003e: RS422 configured as device or controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTC-5B-RS422\u003c\/strong\u003e: Converts MMC to Sony P2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CB Electronics","offers":[{"title":"Default Title","offer_id":42791796080818,"sku":"SCBETC5BMIDI","price":600.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SCBETC5BMIDI.jpg?v=1674062524"},{"product_id":"cb-electronics-er-gain-sum-eurorack-er-gain-sum-module-early-adopters-discount","title":"CB Electronics ER-GAIN+SUM - EuroRack -ER-Gain+Sum Module\n - Early Adopters Discount","description":"\u003ch2\u003eCB Electronics ER-GAIN+SUM - EuroRack -ER-Gain+Sum Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCB Electronics ER-GAIN+SUM\u003c\/strong\u003e 8-channel Gain module is also DC coupled and can control both audio and Control Voltage Signals. A Sum output allows any combination of inputs to be summed after the gain control. Three master groups allow any combination of channels to be controlled. \u003c\/p\u003e\n\u003ch2\u003eCB Electronics ER-Gain Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 Channels of Gain Control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSum output, any combination of inputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual select Switch for each channel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChannel Mute \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGain Control range -96 to +22dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution 0.25dB, 0.5dB or 1 dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree Master Groups with Mute and Gain\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":44460761448626,"sku":"SCBEERGAINSUM","price":192.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Edited_0002_ER-Gain_SumSQ.jpg?v=1718623776"},{"product_id":"cb-electronics-er-patch16-eurorack-er-patch-16x16-matrix-module-early-adopters-discount","title":"CB Electronics ER-PATCH16 - EuroRack -ER-Patch 16x16 Matrix Module\n - Early Adopters Discount","description":"\u003ch2\u003eCB Electronics ER-PATCH16 - EuroRack -ER-Patch 16x16 Matrix Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCB Electronics ER-Patch16\u003c\/strong\u003e module provides a 16x16 crosspoint matrix. DC Coupled so that Audio, Control Voltage, or even Trigger or Gate signals may be routed. Two ER-Patch Modules with Expansion boards can be combined to make a single 32x32 crosspoint Matrix.\u003c\/p\u003e\n\u003ch2\u003eCB Electronics ER-Patch16 Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16x16 CrossPoint matrix with buffered outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Coupled – Route Audio, DC Control, Gate, Trigger \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCombine Two ER-Patch modules with Expanders to make a 32x32 Matrix\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne to Many, can also be used for Active Multing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSelect Switch for immediate access\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":44460761546930,"sku":"SCBEERPATCH16","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Edited_0001_ER-Patch16.jpg?v=1718619800"},{"product_id":"cb-electronics-er-patch32-eurorack-er-patch-32x32-matrix-module-early-adopters-discount","title":"CB Electronics ER-PATCH32 - EuroRack -ER-Patch 32x32 Matrix Module\n - Early Adopters Discount","description":"\u003ch2\u003eCB Electronics ER-PATCH32 - EuroRack -ER-Patch 32x32 Matrix Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCB Electronics ER-Patch32\u003c\/strong\u003e modules provide a 32x32 crosspoint matrix. DC Coupled so that Audio, Control Voltage, or even Trigger or Gate signals may be routed. Two ER-Patch Modules with Expansion boards can be combined to make a single 32x32 crosspoint Matrix.\u003c\/p\u003e\n\u003ch2\u003eCB Electronics ER-Patch32 Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e32x32 CrossPoint matrix with buffered outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Coupled – Route Audio, DC Control, Gate, Trigger \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne to Many, can also be used for Active Multing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSelect Switch for immediate access\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":44460761612466,"sku":"SCBEERPATCH32","price":720.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Edited_0001_ER-Patch32.jpg?v=1718620122"},{"product_id":"cb-electronics-er-processor-eurorack-cpu-with-trigger-section-module-early-adopters-discount","title":"CB Electronics ER-PROCESSOR - EuroRack -CPU with Trigger Section Module - Early Adopters Discount","description":"\u003ch2\u003eCB Electronics ER-PROCESSOR - EuroRack -CPU with Trigger Section Module - Early Adopters Discount\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe \u003cstrong\u003eCB Electronics ER-Processor\u003c\/strong\u003e module provides computer interface via USB Midi and Ethernet, Midi Snapshot automation, Serial (5pin DIN) Midi interface to Midi foot Switch or Keyboards. A Trigger Section with eight 3.5mm Jacks and Switches which may be used as control or Record and Playback Trigger or Gate signals via Midi. The processor includes a 128 snapshot store which holds the parameters for up to 16 modules. All functions may be controlled using the colour TFT display and encoder or from the XPatch5 Win\/Mac program. \u003c\/p\u003e\n\u003ch2\u003eCB Electronics ER-Processor Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Midi for Computer Control or DAW Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEthernet for Computer Control and RTPmidi\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl of up to 16 modules\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.5mm Jack Serial Midi in and out for Keyboard or Midi Foot Switch    \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1.8\" Color TFT Display, Configuration and Control of modules\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEncoder with Push Switch, Configuration and Control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHome Switch - Return to Home Menu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSnapshot Automation (128 point)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterfaces with XPatch5 Windows\/Mac program\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA select switch on Modules for immediate control \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CB Electronics","offers":[{"title":"Default","offer_id":44460761710770,"sku":"SCBEERPROCES","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Edited_0000_ER-Processor.jpg?v=1718618671"}],"url":"https:\/\/studiocare.com\/collections\/cb-electronics\/ancillary-studio-broadcast_patchbays.oembed","provider":"Studiocare","version":"1.0","type":"link"}