{"title":"Daking","description":"","products":[{"product_id":"daking-micpre-ii","title":"Daking MicPre II - Two-channel preamp","description":"\u003ch2\u003eDaking MicPre II\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDaking MicPre II\u003c\/strong\u003e is a high end 2 channel pre built high quality jensen transformers on the mic inputs, variable HP filter, and Discrete Class A circuitry. The Mic Pre 2 also provides you with per-channel polarity reverse, 20dB pads, phantom power, and selectable 1\/4\" line\/hi-Z input on the front panel. The two aluminium knobs give you precise control over the variable high pass filter and gain. With its rugged 1RU stainless steel chassis and high-quality parts, the Mic Pre II is built to perform for the long haul.\u003c\/p\u003e\n\u003cp\u003ePer-channel, the Mic Pre II is fitted with two large knurled aluminium knobs control the variable high pass filter (10-200Hz) and continuously variable input gain, which is complemented by a full-width, twenty-segment bi-color LED meter. The rear of the unit offers a Jensen transformer-isolated mic input and fully-balanced XLR output, plus a 1\/4-inch line output. A fourth connector introduces DC power from the external power supply to the unit.\u003c\/p\u003e\n\u003ch2\u003eDaking MicPre II Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTransformer balanced input, electronically balanced output\u003c\/li\u003e\n\u003cli\u003eAll discrete transistor Class A circuitry\u003c\/li\u003e\n\u003cli\u003eContinuously variable gain controls\u003c\/li\u003e\n\u003cli\u003eContinuously variable high pass filter controls, 10-200Hz @12dB\/octave\u003c\/li\u003e\n\u003cli\u003eFront panel instrument inputs\u003c\/li\u003e\n\u003cli\u003e20-segment VU meters\u003c\/li\u003e\n\u003cli\u003eSwitchable +48V phantom power\u003c\/li\u003e\n\u003cli\u003e20dB pads\u003c\/li\u003e\n\u003cli\u003eAll relay switching with gold bifurcated contacts\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for noise immunity\u003c\/li\u003e\n\u003cli\u003eAluminum knobs\u003c\/li\u003e\n\u003cli\u003ePower supply included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1U\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 19\"\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 2 x Female XLR\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 2 x Male XLR, 2 x Female 1\/4\" jack\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Daking","offers":[{"title":"Default Title","offer_id":31480589811758,"sku":"SDAKMICPRE2","price":1332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/micpre-ii-1.jpg?v=1578923054"},{"product_id":"daking-comp-ii-stereo-daking-vca-compressor-new-product","title":"Daking COMP II Stereo VCA Compressor","description":"\u003ch2\u003eDaking COMP II Stereo VCA Compressor\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e Daking COMP II\u003c\/strong\u003e is a handmade compressor\/limiter designed to be easy to use and sound like much more expensive comp\/limiters. \u003c\/p\u003e\n\u003cp\u003eThe two channel, electronically balanced COMP II, can operate in dual mono or stereo linked mode for a beautiful stereo image. In dual mono it acts like two independent mono compressors for use on two different - perhaps unrelated - sources. There is no master channel in stereo mode. Each channel retains its independent control.\u003c\/p\u003e\n\u003cp\u003eThe Daking Comp 2 is a complex design that employs a unique method of gain reduction using a VCA like a FET. This maintains the unique Daking sound of legacy compressors. Unlike most VCA designs, ours uses feedback gain reduction, a peak detector and an all-discrete Class A follower.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe outboard power supply makes sure this unit is quiet and usable around the world on any voltage. Switches are illuminated, making it easy to see what’s “on” in a dark room. The rear panel offers XLR electronically balanced inputs and electronically balanced XLR\/¼” TRS outputs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDifferential input and output amps\u003c\/li\u003e\n\u003cli\u003eClass A amplifier for make-up gain\u003c\/li\u003e\n\u003cli\u003eAll metal construction with stainless steel chassis for noise immunity\u003c\/li\u003e\n\u003cli\u003eCustom aluminum knobs\u003c\/li\u003e\n\u003cli\u003ePower supply included\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 65 kHz\u003c\/li\u003e\n\u003cli\u003eTHD at +4 dBu input and no compression at 1 kHz: Typical 0.02%, Max 0.035% (22 - 22 kHz, unweighted)\u003c\/li\u003e\n\u003cli\u003eTHD at +4dBu input and 2 dB of compression at 1 kHz: Typical 0.02%, Max 0.035% (22- 22 kHz, unweighted)\u003c\/li\u003e\n\u003cli\u003eNoise: less than -80 dBu, 22 - 22 kHz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Daking","offers":[{"title":"Default Title","offer_id":32417997684782,"sku":"SDAKCOMPII","price":1332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SDAKCOMPII-front.jpg?v=1593618079"},{"product_id":"daking-comp-iit-stereo-vca-compressor-with-jensen-transformers","title":"Daking COMP IIT Stereo VCA Compressor - with Jensen Transformers","description":"\u003ch2\u003eDaking COMP IIT Stereo VCA Compressor\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDaking Comp IIT\u003c\/strong\u003e is a VCA style compressor\/limiter with Jensen input, and output transformers, designed to provide that much sought after analogue 'glue' in an easy to use, handmade unit.\u003c\/p\u003e\n\u003cp\u003eThe Daking COMP IIT is designed to be easy to use and sound like much more expensive comp\/limiters.  Built in the USA, it offers better sounding compression on all kinds of sources in the studio.  The COMP IIT features Jensen transformers on both the input and output which feature lower distortion, adding subtle colour and providing that much sought after analogue “glue” when used on stereo sources.  Whether in the hands of a highly experienced engineer who needs fast workflow, or a novice who is not sure how to best set up a compressor, the COMP IIT gives professional results without a big learning curve.\u003c\/p\u003e\n\u003cp\u003eWith big old-style analogue meters and a simple setup, the COMP IIT is easy to understand and easy to use.  Designed carefully by Geoff Daking and Dave Thibodeau to behave well on a variety of real in-studio applications, it may challenge your notions of how good a two-knob compressor can be.\u003c\/p\u003e\n\u003cp\u003eThe two channel COMP IIT can operate in dual mono or stereo linked mode for a beautiful stereo image. In dual mono it acts like two independent mono compressors for use on two different – perhaps unrelated – sources. There is no master channel in stereo mode. Each channel retains its independent control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: XLR (x2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e: XLR (x2), TRS (x2)\u003c\/li\u003e\n\u003cli\u003eJensen Transformers on input and output\u003c\/li\u003e\n\u003cli\u003eClass “A” amplifier for make-up gain\u003c\/li\u003e\n\u003cli\u003eAll metal construction with stainless steel chassis for noise immunity\u003c\/li\u003e\n\u003cli\u003eCustom aluminum knobs\u003c\/li\u003e\n\u003cli\u003ePower supply included\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz-65kHz\u003c\/li\u003e\n\u003cli\u003eTHD at +4dBu input and no compression at 1kHz: Typical 0.02%, Max 0.035%\u003c\/li\u003e\n\u003cli\u003e(22-22kHz, Un-Wtd)\u003c\/li\u003e\n\u003cli\u003eTHD at +4dBu input and 2dB of compression at 1kHz: Typical 0.02%, Max 0.035%\u003c\/li\u003e\n\u003cli\u003e(22-22kHz, Un-Wtd)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise\u003c\/strong\u003e: less than -80dBu, 22-22kHz\u003c\/li\u003e\n\u003cli\u003e1U 19” rack-mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit weight\u003c\/strong\u003e: 6.25 lbs (2.83 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit dimensions\u003c\/strong\u003e: L front: 19in (48.26cm) L rear: 17in (43.18cm) W: 8.375in\u003c\/li\u003e\n\u003cli\u003e(21.27cm) H: 1.625in (4.13cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox weight\u003c\/strong\u003e: 9.5 lbs (4.31 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox dimensions\u003c\/strong\u003e: L: 29in (73.66cm) W: 14 in (35.56cm) H: 6 in (15.24cm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Daking","offers":[{"title":"Default","offer_id":32678963118126,"sku":"SDAKCOMPIIT","price":1915.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SDAKCOMPIIT-front.jpg?v=1601375124"},{"product_id":"daking-micpre-iit-two-channel-preamp-with-jensen-transformers-on-inputs-outputs","title":"Daking MicPre IIT - Two channel preamp with vintage Reichenbach design, USA made transformers","description":"\u003ch2\u003eDaking MicPre IIT - Two channel preamp with Jensen transformers on inputs \u0026amp; outputs\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDaking MicPre IIT\u003c\/strong\u003e is a two channel microphone preamp featuring two Daking's celebrated Mic Pre One units in one single rack unit. The MicPre IIT features a variable high pass filter on each channel, class A amplification which +24dB headroom, selectable phantom power and USA made transformers on both the input and output.\u003c\/p\u003e\n\u003cp\u003eThe Mic Pre IIT’s high pass filter is continuously variable from 10-200Hz, and drops at 12dB per octave. It seems to have a magical ability to clean up the muck while making what remains sound even better. It is extremely helpful to DAW users who inadvertently record sub-sonics that muddy up tracks and mixes.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eKey Features:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e70dB of gain\u003c\/li\u003e\n\u003cli\u003e+24dB of headroom\u003c\/li\u003e\n\u003cli\u003eVintage Reichenbach design, USA made transformers input and output transformers\u003c\/li\u003e\n\u003cli\u003eClass A amplification\u003c\/li\u003e\n\u003cli\u003eVariable high-pass filter\u003c\/li\u003e\n\u003cli\u003eSwitchable polarity\u003c\/li\u003e\n\u003cli\u003e20 segment combo VU and “peak hold” LED meter\u003c\/li\u003e\n\u003cli\u003e20dB pad with constant reflected impedance\u003c\/li\u003e\n\u003cli\u003eSwitchable phantom power\u003c\/li\u003e\n\u003cli\u003eDirect 1\/4″ instrument inputs on the front panel\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiscrete transistor circuitry\u003c\/li\u003e\n\u003cli\u003eClass \"A\" amplifiers for the preamp and High-Pass Filter\u003c\/li\u003e\n\u003cli\u003e70dB of gain\u003c\/li\u003e\n\u003cli\u003eContinuously variable Gain Control\u003c\/li\u003e\n\u003cli\u003e20 segment LED VU Meter (-20 to +25)\u003c\/li\u003e\n\u003cli\u003e+23dBu overload indicator\u003c\/li\u003e\n\u003cli\u003eFloating peak indicator\u003c\/li\u003e\n\u003cli\u003eAll relay switching with gold bifurcated contacts\u003c\/li\u003e\n\u003cli\u003eSwitched +48 Volt Phantom power\u003c\/li\u003e\n\u003cli\u003e20dB pad on mic input\u003c\/li\u003e\n\u003cli\u003eAll-metal construction with stainless steel chassis for noise immunity\u003c\/li\u003e\n\u003cli\u003eCustom aluminium knobs\u003c\/li\u003e\n\u003cli\u003ePower supply included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e: 2 x XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 2 x XLR, 2 X TRS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 7.5Hz to \u0026gt;120kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEIN Mic Noise\u003c\/strong\u003e: -118dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise (Mic)\u003c\/strong\u003e: -82dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N (Mic)\u003c\/strong\u003e: 0.0089%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U 19” rack-mount case\u003c\/strong\u003e: 17” (43.18cm) width, 8.375” (21.27cm) depth, 1.625 (4.13cm) height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit weight\u003c\/strong\u003e: 6.35 lbs. (2.88 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox weight\u003c\/strong\u003e: 9.75 lbs. (4.42 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox dimensions\u003c\/strong\u003e: L: 29” (73.66cm) (736.6mm) W: 14” (35.56cm) (355.6mm) H: 6” (15.24cm) (152.4mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Daking","offers":[{"title":"Default Title","offer_id":40180121469106,"sku":"SDAKMICPRE2T","price":1624.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/SDAKMICPRE2T-1_1.jpg?v=1622553473"}],"url":"https:\/\/studiocare.com\/collections\/daking\/outboard_mic-pre-channel-strips.oembed","provider":"Studiocare","version":"1.0","type":"link"}