{"title":"Neumann KH Subwoofers","description":"","products":[{"product_id":"neumann-kh750-dsp","title":"Neumann KH750 DSP Active DSP Subwoofer","description":"\u003ch2\u003eNeumann KH750 DSP Active DSP Sub-woofer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeumann KH750 DSP\u003c\/strong\u003e active DSP sub-woofer is a studio quality sub that features a 10\" driver, deep bass response and DSP engine optimizes output to achieve reference class sound. The compact KH 750 DSP is the ideal choice for smaller rooms and smaller studio monitors, such as the KH 80 DSP. It has a unique and flexible 2.0\/0.1 Bass Manager allowing the sub-woofer to be used in many different system configurations.\u003c\/p\u003e\n\u003cp\u003eOn the back panel there are analog and digital inputs and outputs, four routing modes and adaptable acoustical controls to allow for seamless system integration. The Neumann.Control software gives access to many additional functions inside the sub-woofer. The KH 750 DSP can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.\u003c\/p\u003e\n\u003cp\u003eThe newly designed 10” long-throw driver has a large magnet, linear motor design and a very stiff pressed steel basket. As subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The well-braced cabinet is a sealed designed which brings the fastest possible transient response. The two analog XLR inputs are balanced as are the two analog XLR outputs. The 192 kHz \/ 24-bit digital input can accept AES3 and S\/P-DIF signals. There is a bypassable standby function and the switch-off time can be adjusted in Neumann.Control.\u003c\/p\u003e\n\u003ch2\u003eNeumann KH750 Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDecreased the bass extension of the monitoring system\u003c\/li\u003e\n\u003cli\u003eIncreasing the maximum SPL of loudspeakers\u003c\/li\u003e\n\u003cli\u003eDecreasing harmonic and intermodulation distortion of loudspeakers\u003c\/li\u003e\n\u003cli\u003eReproducing the LFE channel\u003c\/li\u003e\n\u003cli\u003eReproducing the “Sub” signal of a bass managed multichannel source\u003c\/li\u003e\n\u003cli\u003eWorking as an extension for KH line subwoofer systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eTHD+N\u003c\/strong\u003e: \u0026lt; -100 dB; \u0026lt; -90 dB\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eFree field frequency response ±6 dB\u003c\/strong\u003e: 16 … 800 Hz\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eFree field frequency response ±3 dB\u003c\/strong\u003e: 18 … 750 Hz\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eReproduction accuracy between 50 Hz and 100 Hz\u003c\/strong\u003e: 100%, 80%, 50% of subwoofers produced: n\/a\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eSelf-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)\u003c\/strong\u003e: \u0026lt;20 dB(A) SPL\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eSine wave output with a THD \u0026lt; 0.5 % at 1 m in half space\u003c\/strong\u003e: 95 dB SPL (\u0026gt;70 Hz)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eBass capability\u003c\/strong\u003e: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eAnalog input(s)\u003c\/strong\u003e: 2 x XLR: analog electronically balanced\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eAnalog input impedance\u003c\/strong\u003e: \u0026gt;13k Ohms\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eMax. input level\u003c\/strong\u003e: \u0026lt; +24 dBu\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCommon mode rejection ratio (CMRR)\u003c\/strong\u003e: \u0026gt; 56 dB @ 15 kHz\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCrosstalk (1 kHz), level matching\u003c\/strong\u003e: \u0026lt; -90 dB; ±0.1 dB\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eVolume control\u003c\/strong\u003e: via Neumann.Control software\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eVolume control range; resolution\u003c\/strong\u003e: 0 … -∞ dB; 0.1 dB\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eAnalog dynamic range; THD+N\u003c\/strong\u003e: 119 dB(A); \u0026lt;0.003% (-90 dB)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eSignal routing modes\u003c\/strong\u003e: Right; External Bass Management; 2 x LFE\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eAnalog output(s)\u003c\/strong\u003e: 2 x XLR; analog electronically balanced\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eInput gain control (sensitivity)\u003c\/strong\u003e: +2 ... -12 dB\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eOutput level control (output level in 1 m based on 0 dBu input level)\u003c\/strong\u003e: 94; 100; 108; 114 dB SPL\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDigital input(s)\u003c\/strong\u003e: BNC (75 Ω): AES3; S\/P-DIF\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDigital output(s)\u003c\/strong\u003e: BNC (75 Ω): AES3\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDigital converter\u003c\/strong\u003e: resolution; design : 16 … 24-bit DAC; Δ∑\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDigital converter\u003c\/strong\u003e: sampling rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDynamic range A-D-A:\u003c\/strong\u003e \u0026gt;120 dB(A)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDynamic range D-A\u003c\/strong\u003e: \u0026gt;123 dB(A)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDigital sensitivity\u003c\/strong\u003e: -18 dBFS = 100 dB SPL at 1 m\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eLatency\u003c\/strong\u003e: 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDelay\u003c\/strong\u003e: User adjustable delay range : 0 ... 100 ms and 2 x 0 ... 20.8 ms\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDelay\u003c\/strong\u003e: Resolution: time; distance : 0.1 ms; 3.44 cm (1 3\/8”)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDelay\u003c\/strong\u003e: Max. frames Audio-video synchronisation (lip sync): 2.5 (40 ms) frames; 3 (33 ms) frames\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDelay\u003c\/strong\u003e: Time-of-flight maximum distance : 2 x 7.16 m (23' 5\")\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eController design\u003c\/strong\u003e: Digital; active\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency\u003c\/strong\u003e: 80 Hz fixed or 60 ... 100 Hz via Neumann.Control\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCrossover slope\u003c\/strong\u003e: 24 dB\/oct; 4th order\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003ePhase\u003c\/strong\u003e: 0; 45; 90; 135 und 0\/180 deg\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eEqualization\u003c\/strong\u003e: via Neumann.Control software: 8 x full parametric IIR + low \/ high shelf global balance\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eFIR phase correction\u003c\/strong\u003e: For connected analog loudspeakers: Linear phase (170 Hz ... 16 kHz; +\/- 45°)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eInfrasonic filter\u003c\/strong\u003e: frequency; slope : 17.5 Hz; 12 dB\/oct.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eRemote control\u003c\/strong\u003e: Neumann.Control software via an RJ45 connector carrying standard IP data\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: On; Normal Operation: Green LED\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Identification: Amber LED\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Limit \/ Clip \/ Errors \/ Protection \/Boot Mute \/ Shut Down Mute: Red LED\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Bass Management on: Green LED\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eOutput power woofer amplifier\u003c\/strong\u003e (THD+N with limiter deactivated: 10%): 256 W\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eMains Power Supply\u003c\/strong\u003e: input voltage; frequency : 100-240V; 50\/60 Hz\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e (230 V \/ 100 V): Standby: \u0026lt;300 mW\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e (230 V \/ 100 V): Idle: 18 W\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e (230 V \/ 100 V): Full output: 410 W\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eIn-rush current (Peak)\u003c\/strong\u003e: 30 A @230 VAC\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eStandby\u003c\/strong\u003e: Disabled; 90 mins (default); user defined in software\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCabinet material\u003c\/strong\u003e: Wood cabinet, aluminum electronics panel\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eCabinet surface finish\u003c\/strong\u003e; color (front \/ back) : Painted; metallic anthracite (RAL 7021) \/ black (RAL 9005)\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions\u003c\/strong\u003e: +10° C to +40° C (+50° F to +104° F); \u0026lt;90% RH, non-condensing\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eTransport\/storage conditions\u003c\/strong\u003e: -25° C to +70° C (-13° F to 158° F); \u0026lt;90% RH; non-condensing\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eWoofer\u003c\/strong\u003e: 265 mm (10\") with protecting black metal grille\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e (height x width x depth): 383 x 330 x 383 mm (15 1\/8\" x 13\" x 15 1\/8\")\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eExternal net volume\u003c\/strong\u003e: 48.4 liters\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cstrong\u003eProduct weight\u003c\/strong\u003e: 19.5 kg (43 lbs)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":31519691178030,"sku":"SNEUKH750","price":1270.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/products\/sneukh750.jpg?v=1578924631"},{"product_id":"neumann-kh-805-ii-subwoofer","title":"Neumann KH 805 II Reference Quality DSP-Controlled Subwoofer","description":"\u003ch2\u003eNeumann KH 805 II Reference Quality DSP-Controlled Subwoofer with Stereo Bass Management\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeumann KH 805 II\u003c\/strong\u003e is the perfect subwoofer for medium-sized rooms, providing bass extension with Neumann precision. It includes a unique and flexible Bass Manager for stereo systems and can also be used in surround and immersive setups for LFE reproduction or with external bass management. Analogue and digital inputs and outputs allow for flexible connectivity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation Subwoofer \u003c\/strong\u003e\u003cbr\u003eThe KH 805 II improves on its predecessor in acoustic performance and adds new features. Thanks to a novel long-throw 10” woofer with Extremely Linear Force Factor (ELFF™) technology and intelligent protection limiters, the KH 805 II ensures exceptionally low distortion even at maximum SPLs. \u003cbr\u003e \u003cbr\u003eThe KH 805 II extends low-frequency reproduction down to 16 Hz and delivers about twice the output of the KH 750 DSP. This makes the KH 805 II the perfect complement to mid-sized speakers such as the KH 150 and KH 310. \u003cbr\u003e \u003cbr\u003eThe KH 805 II is DSP-controlled for superior sonic performance and seamless integration via MA 1 Automatic Monitor Alignment (sold separately). When combined with analogue Neumann studio monitors such as the KH 120 A (discontinued), KH 310, or KH 420, it offers sufficient DSP-power for aligning the entire stereo system using MA 1, optimising not only the frequency response but also the phase. The KH 805 II is therefore a massive upgrade for existing systems. Of course, the KH 805 II is also a perfect complement to Neumann’s DSP-equipped studio monitors.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision in Every Detail \u003c\/strong\u003e\u003cbr\u003eAs subwoofers are typically placed on the floor, a robust grille protects the driver from accidental damage. The rigid cabinet features a highly efficient bass reflex system, which is carefully engineered and tuned for the tightest bass reproduction – with inaudible port noise. \u003cbr\u003e\u003cbr\u003eThe two analogue XLR inputs are electronically balanced, as are the two analogue XLR outputs. The up to 192 kHz \/ 24-bit digital input (BNC) accepts both AES3 and S\/P-DIF signals. The subwoofer has an Auto Standby function, which can be deactivated via a backplate switch. \u003cbr\u003e\u003cbr\u003eThe KH 805 II excels in music, broadcast, and post-production studios for tracking, mixing, and mastering.\u003c\/p\u003e\n\u003ch2\u003eNeumann KH 805 II Key Features: \u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBass extension of the monitoring system down to 16 Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreasing the maximum SPL of the entire system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDecreasing harmonic and intermodulation distortion of loudspeakers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 Ready for perfect alignment of the entire system and seamless subwoofer integration. For multichannel setups, we offer MA 1 Multichannel Extension option.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 integration of analog KH Line speakers, enough DSP power for an entire stereo system. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":56257156743542,"sku":"SNEUKH805II","price":2120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Neumann_0003_kh-805-ii-front-neumann-studio-subwoofer-mr.jpg?v=1757599244"},{"product_id":"neumann-kh-810-ii-subwoofer","title":"Neumann KH 810 II Reference Quality with DSP-Controlled Subwoofer with Multichannel Bass Management","description":"\u003ch2\u003eNeumann KH 810 II Reference Quality with DSP-Controlled Subwoofer with Multichannel Bass Management\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeumann KH 810 II\u003c\/strong\u003e is the perfect subwoofer for medium-sized rooms, providing bass extension with Neumann precision. It includes a unique and flexible Bass Manager for stereo, surround and immersive systems up to 7.1.4. Analogue and digital outputs provide flexible connectivity to up to 11 studio monitors.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation Subwoofer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe KH 810 II improves on its predecessor in acoustic performance and adds new features. Thanks to a novel long-throw 10” woofer with Extremely Linear Force Factor (ELFF™) technology and intelligent protection limiters, the KH 810 II ensures exceptionally low distortion even at maximum SPLs. \u003cbr\u003e \u003cbr\u003eThe KH 810 II extends low-frequency reproduction down to 16 Hz and delivers about twice the output of the KH 750 DSP. This makes the KH 810 II the perfect complement to mid-sized speakers such as the KH 150 and KH 310. \u003cbr\u003e \u003cbr\u003eThe KH 810 II is DSP-controlled for superior sonic performance and seamless integration via MA 1 Automatic Monitor Alignment (sold separately). When combined with analogue Neumann studio monitors such as the KH 120 A (discontinued), KH 310, or KH 420, it offers sufficient DSP-power for aligning an entire stereo, surround or even immersive system up to 7.1.4 via MA 1, optimising not only the frequency response but also the phase. Of course, the KH 810 II is also a perfect complement to Neumann’s DSP-equipped studio monitors. In surround and immersive systems, analogue and DSP-equipped Neumann speakers can be combined and room-aligned using MA 1 with Multichannel Extension (sold separately). The KH 810 II is therefore much more than “just” a subwoofer: It is the perfect tool for upgrading existing systems and\/or extending them for immersive audio. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision in Every Detail \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs subwoofers are typically placed on the floor, a robust grille protects the driver from accidental damage. The rigid cabinet features a highly efficient bass reflex system, which is carefully engineered and tuned for the tightest bass reproduction – with inaudible port noise. \u003cbr\u003e \u003cbr\u003eTwo analogue XLR inputs and outputs are available to connect the subwoofer for stereo operation. For multichannel operation, the KH 810 II offers two Sub D25 connectors for up to 12 analogue input channels and another two Sub D25 connectors for up to 11 analogue output channels. All inputs and outputs are electronically balanced. Studio monitors can also be connected digitally via AES3 (BNC). For audio networking, this subwoofer is also available as an AES67 variant, the KH 810 II AES67. \u003cbr\u003e \u003cbr\u003eThe KH 810 II excels in music, film scoring, broadcast, and post-production studios for tracking, mixing, and mastering. Thanks to a novel power amp design, the KH 810 II combines superior audio performance with excellent energy efficiency. Its Auto Standby function can be deactivated in the MA 1 app. \u003c\/p\u003e\n\u003ch2\u003eNeumann KH810 II Subwoofer Features: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBass extension of the monitoring system down to 16 Hz\u003c\/li\u003e\n\u003cli\u003eIncreasing the maximum SPL of the entire system \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDecreasing harmonic and intermodulation distortion of loudspeakers \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 Ready for perfect alignment of the entire system and seamless subwoofer integration. For multichannel setups, we offer MA 1 Multichannel Extension option. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 integration of analogue KH Line speakers, enough DSP power for an entire multichannel system up to 7.1.4. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":56257157562742,"sku":"SNEUKH810II","price":3275.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Neumann_0003_kh-805-ii-front-neumann-studio-subwoofer-mr_150f1bb7-5e7f-4474-8cf5-44e1ddd7f8c2.jpg?v=1757600998"},{"product_id":"neumann-kh-870-ii-flagship-dsp-controlled-subwoofer","title":"Neumann KH 870 II Flagship DSP-Controlled Subwoofer","description":"\u003ch2\u003eNeumann KH 870 II Flagship DSP-Controlled Subwoofer with Multichannel Bass Management\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNeumann KH 870 II\u003c\/strong\u003e is the perfect subwoofer for larger rooms, providing powerful bass extension with Neumann precision. It includes a unique and flexible Bass Manager for stereo, surround and immersive systems up to 7.1.4. Analogue and digital outputs provide flexible connectivity to up to 11 studio monitors. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext Generation Subwoofer \u003c\/strong\u003e\u003cbr\u003eThe KH 870 II improves on its predecessor in acoustic performance and adds new features. Thanks to two novel long-throw 10” woofers with Extremely Linear Force Factor (ELFF™) technology and intelligent protection limiters, the KH 870 II ensures exceptionally low distortion even at maximum SPLs. \u003cbr\u003e \u003cbr\u003eThe KH 870 II extends low-frequency reproduction down to 16 Hz and delivers about twice the output of the KH 810 II. This makes the KH 870 II the perfect complement to midfield speakers such as the KH 420. \u003cbr\u003e \u003cbr\u003eThe KH 870 II is DSP-controlled for superior sonic performance and seamless integration via MA 1 Automatic Monitor Alignment (sold separately). When combined with analogue Neumann studio monitors such as the KH 120 A (discontinued), KH 310, or KH 420, it offers sufficient DSP-power for aligning an entire stereo, surround or even immersive system up to 7.1.4 via MA 1, optimising not only the frequency response but also the phase. Of course, the KH 870 II is also a perfect complement to Neumann’s DSP-equipped studio monitors. In surround and immersive systems, analogue and DSP-equipped Neumann speakers can be combined and room-aligned using MA 1 with Multichannel Extension (sold separately). The KH 870 II is therefore much more than “just” a subwoofer: It is the perfect tool for upgrading existing systems and\/or extending them for immersive audio. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision in Every Detail \u003c\/strong\u003e\u003cbr\u003eAs subwoofers are typically placed on the floor, robust grilles protect the drivers from accidental damage. The rigid cabinet features a highly efficient bass reflex system, which is carefully engineered and tuned for the tightest bass reproduction – with inaudible port noise. \u003cbr\u003e \u003cbr\u003eTwo analogue XLR inputs and outputs are available to connect the subwoofer for stereo operation. For multichannel operation, the KH 870 II offers two Sub D25 connectors for up to 12 analogue input channels and another two Sub D25 connectors for up to 11 analogue output channels. All inputs and outputs are electronically balanced. Studio monitors can also be connected digitally via AES3 (BNC). For audio networking, this subwoofer is also available as an AES67 variant, the KH 870 II AES67. \u003cbr\u003e \u003cbr\u003eThe KH 870 II excels in music, film scoring, broadcast, and post-production studios for tracking, mixing, and mastering. Thanks to a novel power amp design, the KH 870 II combines superior audio performance with excellent energy efficiency. Its Auto Standby function can be deactivated in the MA 1 app. \u003c\/p\u003e\n\u003ch2\u003eNeumann KH 870 II Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBass extension of the monitoring system down to 16 Hz \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreasing the maximum SPL of the entire system \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDecreasing harmonic and intermodulation distortion of loudspeakers \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 Ready for perfect alignment of the entire system and seamless subwoofer integration. For multichannel setups, we offer MA 1 Multichannel Extension option. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA 1 integration of analogue KH Line speakers, enough DSP power for an entire multichannel system up to 7.1.4. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":56257158676854,"sku":"SNEUKH870II","price":4875.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/Neumann_0004_kh-870-ii-front-neumann-studio-subwoofer-mr.jpg?v=1757602356"}],"url":"https:\/\/studiocare.com\/collections\/neumann-kh-subwoofers\/brand_neumann.oembed","provider":"Studiocare","version":"1.0","type":"link"}