Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Audio Technica ATW-T1001 - System 10 Wireless Beltpack Transmitter

£114.43 inc. vat
£95.36 ex. vat
SKU SAUDATWT1001
Usually Ships within 48 hours.

Audio Technica ATW-T1001

The Audio Technica ATW-T1001 is a high fidelity wireless beltpack transmitter that features both a high-impedance input for instruments, and a low-impedance input with bias connection for use with dynamic and electret condenser microphones. The wireless signal operates at 2.4ghz which is far from TV interference resulting in a clear and natural sound.

The ATW-T1001 wireless beltpack transmitter is easy to configure and is a great choice for performing musicians that need the flexibility of no cables or TV presenters using lavalier microphones.

Audio Technica ATW-T1001 Features

  • Digital 24-bit / 48 kHz wireless operation for high-quality sound and dependable performance
  • 2.4 GHz range - completely free from TV interference
  • Three levels of diversity assurance: frequency, time, and space
  • Power/Mute/Battery indicator shows operation status and lets you know when batteries are low, dead or installed incorrectly
  • Permanently-attached transmitter antenna
  • Transmitter pairing switch and system ID display for pairing a transmitter with a receiver
  • High-impedance input for instruments and low-impedance input with bias connection for microphones
  • Microphone/Instrument level control with included screwdriver for adjusting the input level
  • Power/Mute button allows toggling between muted and unmuted operation via a single touch
  • Audio-Technica microphones and cables are available (sold separately), pre-terminated with a UniPak input connector

Specifications

  • Rf Power Output High:10 mW
  • Spurious Emissions: Following federal and national regulations
  • Input Connections: Four-pin Locking Connector 
  • Pin 1: GND, Pin 2: INST INPUT, 
  • Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
  • Batteries: Two 1.5V AA not included
  • Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Net Weight: 100 grams (3.5 oz) without batteries

View on the Audio Technica Europe Website.