Bryston B60R Integrated Amplifier - 60W into 8 Ohms (100W into 4 Ohms)

Bryston B60R Integrated Amplifier

The Bryston B60R is an audio amplifier which has been built to not only equal, but surpass the parameters of the most demanding material available. It has been designed with pre-out/main in connectors in order to allow independent use of the preamplifier or stereo amplifier section within an audio or video system. Bryston Ltd. has been designing and manufacturing state of the art specialty electronics to both the consumer and professional audio marketplaces for over 35 years. Bryston has a major commitment in producing the most accurate and reliable product available by maintaining an extensive research and development division which is constantly looking for ways to improve the performance, value, and reliability of our products.

Bryston B60R Features

• 60W into 8 Ohms (100W into 4 Ohms)
• Gold plated switch, contacts, and connectors
• Pre-out and main in connectors allow separate use of preamplifiers and power amplifiers, or to facilitate inter-state signal processing

Specifications

General:

• Dimensions:
• Standard version: 17” x 1.75” X 11” (43.18 X 4.44 X 28cm)
• Rack mount version: 19” x 1.75” X 11” (48.26 X 4.44 X 28cm)
• Weight: 17 lbs (7.5 Kg)

Preamplifier section:

• Freq. Response: 20hz~20khz +/- .05Db
• Maximum output: 15 volts
• Imd/thd: <0.005% At 3 volts out
• Sensitivity: 500mv (high level inputs)
• Noise: -100db (ref. 500Mvin, 20~20k hz):

Power amplifier section:

• Output power: 60 watts/channel into 8 ohms 100 watts/channel into 4 ohms
• Thd+n: <0.02% 20Hz~20khz @ 60w
• Noise: 106db below full output
• Slew rate: >60v/usec
• Damping factor: >500 at 20hz (8 ohms)
• Power bandwidth: 0.5Hz to over 100khz
• Sensitivity: 0.775V
• Input impedance: 50k ohms

Additional specifications for b60da/b60rda digital inputs:

• Input sample rate: 16khz to 108khz.
• Word length: 16, 18, 20, 24 bit
• Data format: spdif standard
• Thd+n: < 0.002%, 20Hz~20khz

Additional specifications for b60p/b60rp phono inputs:

• Thd+n: <0.005%, Im or thd, any frequency or combination of frequencies from 20-20khz, at rated output or below.
• Noise: phono: -80dba referred to an input of 5 mv
• Riaa accuracy: within less than +/- 0.05Db from 20~20khz
• Sensitivity: 5mv