Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Neutrik XIRIUM NX1TX Remote Transmitter

by Neutrik
£367.44 inc. vat
£306.20 ex. vat
SKU RNEUNX1TX
In Stock

Neutrik XIRIUM NX1TX Remote Transmitter

This is the Neutrik NX1TX transmitter that is used for the Xirium wireless system. The transmitter accepts microphones, instruments and line level sources via XLR, TRS and 6.35mm connector. It houses a 3 way switch for selecting phantom power (+48v) and activating the 6.35mm jack, high impedance input. It also features LED's for muting, phantom power and high impedance status.

The Neutrik Xirium is a digital wireless system that replaces the need for analogue audio cables where running cables may be difficult or not possible, while still maintaining high audio quality output.

Specifications

  • RF carrier: IEEE 802.11a, 5.15-5.25 GHz, channels 36-48, license-free
  • Data protocol: Proprietary (DIWA technology)
  • Range: Typically 30m line of sight, up to 300m point-to-point
  • Data transmission: 24 bit, 48kHz, compression free
  • Latency: 3.4mS
  • TRX antenna: Two half-wave dipoles with SMA male connectors
  • Audio channels: 4 per TRX unit, (8 maximum, with two linked TRX units)
  • Broadcast mode: 3 receivers per audio channel (12 per TRX unit, RX mode only)
  • Response: 20Hz - 20kHz +0.5 -1.5dB, referred to 1kHz
  • Distortion: Better than 0.01% THD + noise, 1kHz, +4dBu, TX gain minimum
  • Dynamic range: Better than 105dB, 1kHz, A-weighted
  • Crosstalk: Better than -90dB, 20kHz