Neutrik XIRIUM PRO RX Digital DANTE Output Module (NXP-RM-DANTE-E)
£281.25 ex. vat
Neutrik XIRIUM PRO NXP-RM-DANTE-E
The Neutrik XIRIUM PRO NXP-RM-DANTE-E is a Digital Dante Output Module for the XIRIUM PRO Europe Receiver RX (NXP2RX-E).
With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.
Specifications
GENERAL SPECIFICATIONS
- Radio frequency carrier range: IEEE 802.11a, UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
- Data protocol: Proprietary (DiWA technology)
- Transmit power: Conducted 8 dBm / 14 dBm (with 6 dBi antenna)
- Range: Up to 500 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode
AUDIO PERFORMANCE (ANALOG TO ANALOG PER WIRELESS LINK)
- THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz – 10 kHz, 4 dBu
- Frequency response: +0.5 dB / -1.5 dB @ 20 Hz – 20 kHz ref. 1 kHz
- Dynamic range: > 105 dB @ 1 kHz, A-weighted
- Crosstalk: < -80 dB @ 20 kHz
- Number of audio channels @ 24 mbps: 2
- Number of audio channels @ 6 mbps: 1 (XROC mode)
- Converter resolution (ADC & DAC): 24 bit
- Sampling rate: 48 kHz
- Latency (Delay): 3.6 msec (analog to analog)
- Transmission method: Compression-free, no reduction of converted data
- Operating temperature: 32° F to +122° F / 0 °C to +50 °C
- Storage temperature: -4° F to +176° F / -20 °C to +80 °C
ADDITIONAL DIGITAL AUDIO INTERFACES
- AES/EBU: 24 bit / 48 kHz according to AES3-2003
- Dante AoE (Audio over Ethernet): proprietary protocol by Audinate®
RX SPECIFIC CHARACTERISTICS
- Antenna 5-6GHz - Audio Transmission: Directional, 14dBi, 35° Elevation and 40° Azimuth, N-connector male
- Antenna 2.4GHz - Control Data Transm.: 1/2 wave dipole with SMA female connectors
- Number of audio channels: 2
ANALOG OUTPUT SPECS
- Output Type - Line Output (balanced)
- Output Level
- Output Imp.: < 800 Ohm
- Rated Source Imp.: 10 kOhm
- Nominal.: 0 dBU (if TX source = 0 dBu)
- Max. level: 22 dBU
- Indicators: LEDs: Power ON / Start Up / Low Battery Status / Audio Delay / Linking Process / Audio reception
- Controls: Power ON / Linking Process / Audio Delay
- Power Supply: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz) or internal battery (typical battery runtime 10 hours, depending on type of module, XROC mode, number of charging cycles and operating temperature)