Rupert Neve Designs RND-5033-H - 5 Band EQ
£1,459.00 ex. vat
The Portico 5033 5-band EQ/high performance line driver is truly worthy of the name Rupert Neve Designs. Inside, you'll find the features and musicality you'd expect from Neve - and a significant amount of that magic comes from Mr. Rupert Neve's custom input and output transformer designs. The 5033 sports five bands of EQ based on Neve's traditional curves, a -/+12dB input level adjustment, and five frequency bypasses. Built for recording or mixing, every studio will benefit from adding vintage Neve sound to their rack with the Portico 5033.
Built for impressive sound quality
The Portico 5033 5-band EQ/high-performance line driver is an equalizer with the performance, features, and musicality expected from the designer, Mr. Rupert Neve. The 5033 features Neve custom input and output transformer designs, five bands of EQ based on his traditional curves, -/+12dB input level adjustment, and five filter bypasses.
At the input and output of the 5033 lie custom designed Rupert Neve transformers, which are at the heart of the sound of Mr Rupert Neve's classics. The EQ section can be completely bypassed and the unit can be used as a very high quality line driver using these transformers, which can help to add sonic "sweetness" to a source.
Low Frequency and High Frequency Shelving Filters
For opposite ends of the audio spectrum, there are two separate shelving filters, which are both engaged or disengaged using the same LED pushbutton. Each shelving filter allows for a boost or cut of up to 12 dB, providing steeply rising or falling curve shapes. When these curves are boosted or cut aggressively, they enable the second and even third harmonic to be varied in relation to their fundamental, allowing the natural sound of a musical instrument to be varied. When used less aggressively, one can attenuate bands of frequencies above or below the "turnover" point to their desired levels. These sections each provide EQ curves that approximate to 6 dB/ and give a true "Flat" response when this section is engaged but not boosted or attenuated.
Low Frequency (LF) Shelving Filter
The LF Shelving Filter is continuously variable from 30Hz to 300 Hz, allowing for a wide range of applications - from filtering out low rumbles caused by air conditioning units to taming an instrument with too much low end to adding a little bit of "oomph" to a thin mix, proving to be an indispensable asset in the signal chain.
High Frequency (HF) Shelving Filter
The HF Shelving Filter is continuously variable from 2.5 kHz to 25 kHz, giving this section of the EQ a valuable range of operation. Whether you want to really bring out the presence and breath of your vocals or simply add some "air" to your overall mix, the HF shelving filter will give you that bit of sparkle you're looking for.
Mid Range Parametric Filters
To cover the crucial mid-range, the 5033 comes with three bands of parametric EQ, each separately engaged and having a true "flat" response when each section is engaged but not boosted or attenuated. Each section is capable of boosting or attenuating up to 12 dB, and includes a variable "Q" control. "Q" controls range from "Q" = 0.6 to "Q" = 3, allowing you to vary the bandwidth of the attenuation or boost, whether a broad range of frequencies to gently give a sonic section a slight boost or dip or using the filter with a very narrow range of frequencies, acting almost as an audio "chisel" to hone in on certain offending frequencies.
The Mid Frequency Sections
The Low Mid Frequency section is variable from 50 Hz to 400 Hz. The Mid Frequency (MF) Section is variable from 330 Hz to 2.5 kHz. The High Mid Frequency (HMF) Section is variable from 2 kHz to 16 kHz. Each section has been carefully designed to overlap neighboring ranges, allowing for a very fine range of possible adjustments.
Rupert Neve Designs Portico 5033 EQ Frequency Points
- 1st notch not numbered - 65.1 Hz
- 2nd notch - 120.8 Hz
- 4th notch - 248.9 Hz
- 5th notch - 354.5 Hz
- 1st notch not numbered - 443.6 Hz
- 2nd notch - 693.9 Hz
- 4th notch - 1.481 kHz
- 5th notch - 2.225 kHz
- 1st notch not numbered - 2.475 kHz
- 2nd - 4.748 kHz
- 4th - 9.612 kHz
- 5th - 13.545 kHz
- 1st notch not numbered - 68.4 Hz
- 2nd - 111.3 Hz
- 4th - 155.6 Hz
- 5th - 198 Hz
- 1st notch not numbered - 2.760 kHz
- 2nd - 3.240 kHz
- 4th - 5.6 kHz
- 5th - 10.9 kHz