Sonifex RM-M1R53 - Reference Monitor 1 Stereo 53 Segment Meter Rack-Mount
by Sonifex
£545.94
inc. vat
£454.95 ex. vat
£454.95 ex. vat
SKU SSOMRMM1R53
Usually Ships within 48 hours.
Sonifex RM-M1R53
The Sonifex RM-M1R53 is a rack-mount, single stereo channel meter with bright, multi-coloured 53-segment bargraph meters and all the features listed in the specifications.
This product has settings that can be adjusted using the Sonifex SCi (Serial Control Interface) software.
Sonifex RM-M1R53 Specifications
Inputs
- Audio Inputs: 1 x stereo analogue or AES/EBU digital (auto-selecting)
- Max level (0dB input gain): +18dBu (analogue)/0dBFS digital
- CMRR: >60dB typical
- Input Impedance: 20kΩ (analogue) 110Ω (digital with termination switchable via DIPswitch)
- AES/EBU Sample Rate: 32 to 192kHz, converted internally to 48kHz
- Input Gain: 0, +6, +12 or +18dB digital gain (switchable via DIPswitch)
Level Metering
- Number: 1 x 53-segment tri-colour LED bargraphs (RM-M1F53 & RM-M1R53)
-
Characteristics: Selectable by DIPswitch from:
- 1. Dual BBC PPM + standard VU
- 2. BBC PPM - IEC60268-10 11a
- 3. EBU PPM - IEC60268-10 11b
- 4. Nordic PPM - IEC60268-10 1
- 5. AES/EBU digital PPM - IEC60268-18
- 6. DIN PPM - DIN45406
- 7. Standard VU - IEC60268-17
- 8. Extended VU - IEC60268-17
- 9. German
- Ballistics: According to selected characteristic
- Line-Up Level: According to selected characteristic
Phase Metering
- Type: 5-segment, indication at 0, 45, 90, 135 and 180 degrees, 1 per stereo meter
Remote Control
- Serial: RS232, 19200 baud, 3-wire connection
-
Alarm Outputs: (1-4 single input units, 1-8 twin units)
- 1. Audio input 1 under-level/fail (latching)
- 2. Audio input 1 over-level (latching)
- 3. Audio input 1 sustained phase error above 90 degrees (latching)
- 4. AES/EBU input 1 unlock (non-latching)
- 5. Audio input 2 under-level/fail (latching)
- 6. Audio input 2 over-level (latching)
- 7. Audio input 2 sustained phase error above 90 degrees (latching)
- 8. AES/EBU input 2 unlock (non-latching)
- Open-collector outputs rated at 30V,
- 50mA maximum
- Output low/conducting in normal
- condition (no alarm)
-
Control Inputs: (1 single input units, 2 twin units)
- 1. Input 1 Alarm reset
- 2. Input 2 Alarm reset
- Pull-to-ground to activate inputs
Status Indicators
- AES Lock: Indicates lock achieved on digital input
- Level Alarm: Indicates audio over-level
Connectors
- Audio Inputs: 2 x XLR 3-pin female (All balanced, but may be wired unbal)
- Serial: D-sub 9-pin female
- Remote I/O: D-sub 15-pin female
- Mains Input: Filtered 3-pin IEC male, continuously rated 85 – 264VAC, 47 – 63Hz, fused 1A, 30W peak, 15W average