Sennheiser MKH 418 S

The Sennheiser MKH 418 S is an M-S stereo shotgun microphone. Its M-S format, compact dimensions, very good consonant clarity and good spatial representation make it ideally suited for every type of application in film, radio, television and reporting, both indoors and outdoors.

The MKH 418 S employs two independent acoustic systems for generating the mid and side signals. The Mid (M), or mono signal is generated using an internal shotgun microphone. The shotgun accurately reproduces audio with extreme focus, emphasizing the pick up of signals at the direct-axis section (front). The shotgun also rejects signal at the off-axis sections (sides) of the microphone, minimizing noise and further strengthening the pick up area. The Side (S), or stereo signal is generated using a separate, internal microphone system that features a figure-of-eight polar pattern. This system is responsible for reproducing the spatial character needed for the accurate placement of a signal within the stereo field.

The 5-pin XLR male connection output, sends the separate signals of each internal microphone system to the discrete channels of your console, field mixer, recorder or matrixing system. Each internal microphone requires 48V phantom power, supplied via two Sennheiser MZA 14 P48 battery power supply units, or any mixer capable of supplying at least 2 discrete channels of phantom power.

Price for microphone and included accessories only.

Sennheiser MKH 418 S Features

Increased directivity due to interference system (M)
Very low noise
High sensitivity
Symmetrically ungrounded output without repeater
Convincing spatial representation
Universal application due to M-S format
Sturdy and very weather-resistant
Full metal casing, matt black

Specifications

M-S stereo: M: Pressure gradient / interference tube receiver S: Pressure gradient receiver
Pick-up pattern: M: Super-cardioid / lobar S: Figure-of-eight
Frequency response (microphone): 40 - 20000 Hz
Maximum sound pressure level (passiv): 130 dB (63Pa)
Output voltage: 1,5 Volt
Equivalent noise level weighted as per CCIR 468-3: M:14 dB-A/26dB-CCIR, S:22dB-A/24 dB-CCIR
Output impedance: 25 Ohm
Impedance: 1 k Ohm
Phantom powering: P48: 48+/- 4 V / 2x2,3 mA
Connector: XLR-5M
Dimensions: 19 x 280 mm
Weight: 220 g
Operating temperature: -20 to +60 A°C

Filters

Products

Sennheiser MKH 418 S - MS Stereo RF Condenser Shotgun Microphone