Special Order Item
APS SUB 10 - Active 10" Sub Woofer 400W
The APS SUB 10 is a professional active studio subwoofer, designed for accurate sound reproduction equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.
SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.
This subwoofer is suitable for small/mid-sized:
- Recording studios
- Broadcasting studios
- TV studios
- Multimedia studios
- Post production facilities
- Mastering
- Digital workstations
- Home recording studios
- Audio monitoring systems of the highest quality
Specifications
Subwoofer
- Type: Active – Class D power amplifier Hypex: 400 W @ 4Ω
- Dimensions (H x W x D): 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75"
- Free Field Frequency Response: ±2.5 dB: 19-90 Hz
-
SPL in Free Field @ 1m:
- RMS: 108 dB (single subwoofer)
- Peak: 116 dB (pair of subwoofers)
- Weight: 24 kg / 53 lbs
Calibrated Controls
- Input Sensitivity Switch / VOLUME (8 positions): -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB
- Input Sensitivity Switch / VOLUME (3 positions): -20dB, -10dB, 0dB
- Low-pass filter Switch CUT OFF: 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz
-
Filters By-Pass Switch UNFILTERED (LFE):
- Position down: filters ON
- Position up: filters OFF
- PHASE Switch: 0 degrees, 180 degrees
-
STAND-BY Switch:
- Position down: active STAND-BY
- Position up: continuous mode (Stand-by OFF)
Loudspeaker
- Subbass Loudspeaker: Ø 29 cm
- Diaphragm: cellulose, surround: rubber
Amplifiers
- Subbass Loudspeaker Power Amplifier: 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω)
-
THD distortions:
- Typ 0.01%, Max 0.05% 20Hz
- Max 0.04% 20Hz
- Max 0.04% 20Hz
- Typ 0.01%, Max 0.05% 20Hz
Inputs, Outputs
-
INPUT right (R) and left (L):
- Two types (common socket Combo):
- - XLR symmetrical (balanced)
- - TRS symmetrical (balanced) "6.3 mm"
- and RCA nonsymmetrical
- Input impedance 10 kΩ
- Two types (common socket Combo):
- "Loop Through” Output: XLR symmetrical, Output impedance 100 Ω
Protections
- Subbass Loudspeaker Protection: Pop-free start and stop control
- Power Amplifiers Protections: Overcurrent protection
- Power Amplifiers Protections: Overvoltage protection
Signaling Devices
- STAND-BY ON: Orange LED
- CLIPPING detected: Red LED
- POWER ON / DC-error detected: Green LED / Red LED