Barefoot Sound Microstack45 (Pair) 2 x MM45 and 2 x MicroSub45
£8,995.00 ex. vat
Barefoot Sound Microstack45 (Pair) 2 x MM45 and 2 x MicroSub45
The Barefoot Sound Microstack45 is a high fidelity audio reproduction system that features two MicroMain45 3-way active nearfield reference monitors and two MicroSub45 Dual-Force technology subwoofers. Each system combines six high-excursion 8-inch woofers, four 2.5-inch midrange drivers and two 1-inch tweeters working seamlessly together as a single unit driven by 2220W of power.
The MicroMain45 distills the resolution and accuracy of the MiniMain12 into a compact, lighter and more cost-conscious package shares the same amplifier, driver technology and DSP as Barefoot’s flagship system. The MicroMain45’s no-compromise design combines an 8-inch aluminum woofer, two 2.5-inch aluminum midrange drivers and a 1-inch tweeter to deliver over 600W of power with a 40 Hz–45 kHz frequency response.
The MicroSub45 houses a pair of opposing 8-inch Dual-Force™ technology woofers and an analog high-pass filter crossing over from the MicroMain45 at 80 Hz, delivering clean low-frequency extension down to 25 Hz. Dual-Force, a core technology that is found in almost every Barefoot product, eliminates vibration within the MicroSub45 speaker cabinet through its innovative force cancellation design. The opposing woofers significantly reduce distortion and coloration, add a massive internal metal cabinet brace and cause the subs to radiate as if they were a single point source located on axis with the tweeter.
- 2220 Watts of Power
- 80 Hz Balanced Analog High-Pass Filter
- Bass Response Down to 25 Hz
- Dual-Force™ Technology
- (6) 8” Aluminum Woofers
- MEME™ Technology
- $9,249.00 USD a Pair
Specifications
- Controls: Input level stepped attenuator, Equalization contour
- Input Impedance: 50k Ohm
- Frequency Response: MicroMain45
- 18Hz – 50kHz (±3dB)
- 26Hz – 40kHz (±1dB)
- Bass Response: -3 dB @ 25Hz, Q = 0.707, Slope = 12 dB/octave
- Cabinets: 32 liters total internal volume together. Both units are sealed woofer and midrange enclosures, Machined aluminum baffle plate, Long fiber foam acoustic damping throughout
- Crossover Frequencies: 80 / 600 / 3600 Hz
- Tweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamber, Amplifier: 180W Hypex
- Midranges: 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursion, Amplifier: 180W Hypex
- Woofers: 2 x 8″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursion, Amplifier: 500W
- Subwoofers: 4 x 8″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursion, Amplifier: 1000W
- AC Power Input: Nominal 115 VAC or 230 VAC selectable
- Power Consumption: Idle: 25W, Maximum: 1165W