Blackmagic Design ATEM Studio Converter 2

Blackmagic Design ATEM Studio Converter 2

The Blackmagic Design Studio Converter 2 is a converter that takes SDI video signals via optical fiber and converts the signals to SDI so that they can be used with video switchers. When the Studio Converter 2 is used with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables.

Specifications

SDI Video Input

• 4 x 10 bit SD/HD switchable camera inputs 
• 1 x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in the SDI signal
• SDI Compliance: SMPTE 259M, SMPTE 292M
• Video Sampling: 4:2:2
• Color Precision: 10-bit
• Color Space: REC 601, REC 709

Optical Fiber Video Input

• 4 x single mode SD/HD switchable camera inputs with LC connector
• Optical Fiber Input
• 4 x single mode LC connectors for video with embedded audio
• Channels 1 & 2 are camera audio 
• Channels 15 & 16 are talkback audio

Optical Fiber Video Output

• 4 x single mode LC connectors for video with embedded audio
• Channels 1 & 2 are camera audio 
• Channels 15 & 16 are talkback audio

OS Compatibility

• Mac: OS X 10.7 Lion and later, OS X 10.8 Mountain Lion and later
• Windows: Windows 7, Windows 8

Computer Interface

• 1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control
• Temperature Operating: 32 to 104°F (0 to 40°C)
• Temperature Storage: -4 to 113°F (-20 to 45°C)

Audio

• Audio Sampling: 48 KHz, 24-bit A/D conversion
• Analog Audio Output: 4 x 3-Pin XLR Balanced Audio Pairs (1 x pair per fiber input), 2 x RCA jacks provide a L/R stereo pair
• Talkback: 1 x 1/4" TRS headphone jack, 1 x .206" TRS mic input for use with aviation style headset, 1 x 3-pin XLR connector for talkback microphone, 1 x integrated speaker
• Talkback Control: 8 x Front panel buttons for camera operator selection, lock, mute and un-mute
• AES/EBU Talkback Loops Input: 1 x BNC mic input, 1 x BNC headphone input
• AES/EBU Talkback Loops Output: 1 x BNC mic output, 1 x BNC headphone output

Power Requirements

• 110 - 220V AC, 50/60 Hz
• 12 - 31 V DC redundant input
• Note: IEC powercord is required/not included, redundant power supply not included

• Dimensions: (H x W) 1.7 x 18.9" (44 x 482 mm)
• Weight: 4 lb (1.81 kg)