DPA 2028-B-SE2 - Supercardioid Vocal Mic head for Sennheiser Systems
£410.00 ex. vat
DPA 2028-B-SE2 - Capsule
The DPA 2028-B-SE2 is a variant of the 2028 that is designed for the Sennheiser G4, 2000 & 6000 Series Wireless Transmitter system. The DPA 2028 is a supercardioid vocal mic that allows you to capture true sound and produce an unforgettable show. Effortlessly. The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Use it wired or together with your favorite wireless system, either way, just plug it in and hear the vocals shine like never before.
This listing is for the capsule only and is designed for use with you existing Sennheiser G4 Transmitter body. Sennheiser 2000, 6000, 9000, evolution & D1
DPA 2028 Features
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
- Uniform supercardioid directionality
- Extreme SPL handling
Specifications
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Effective frequency response: 20 Hz - 20 kHz
- Frequency range, ±2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- THD: < 1% up to 139 dB SPL peak
- Dynamic range: Typ. 117 dB
- Max. SPL, THD 10%: 160 dB SPL peak
- Rated output impedance: 150 Ω
- Minimum load impedance: 1 kΩ
- Cable drive capability: 100 m (328 ft)
- Output balance principle: Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
- Power supply (for full performance): 48 V Phantom power (±4 V)
- Current consumption: Max 2.5 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight: 286 g (10.1 oz)
- Diameter: 48 mm (1.9 in)
- Capsule diameter: 19 mm (0.75 in)
- Microphone length: 188 mm (7.4 in)
- Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
- Polarity: +V at pin 2 for positive sound pressure