Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

DPA d:mension™ 5100 Mobile 5.1 Surround Mic

£2,856.00 inc. vat
£2,380.00 ex. vat
SKU SDPA5100
Please contact us for availability.

DPA d:mension™ 5100 Mobile 5.1 Surround Mic

The DPA d:mension 5100 is a plug and play 5.1 recording system for recording sound ambience, sports broadcasts, video productions and documentaries.  No additional signal processing is needed and the mic can be attached to a camera, mic stand, suspension mount or handheld and is light and weather proof enough to survive all manner of shooting locations.

The 5100 works through using five miniature pressure transducers that reject wind and mechanical noise with low sensitivity, low distortion chance, highly consistent low frequency response and a large dynamic range.  Channel separation and directionality is achieved through DPA’s DiPMic system which mounts interference tubes on the L/C/R capsules coupled with acoustic baffles that further preserve the accuracy levels between each channel.

The front three mics are time coincident so as to reduce comb filtering and ensure paramount frequency consistency when mixed down to stereo and mono. The rear mics are optimally spaced from each other and the front to maintain the most natural time differences to each channel.

The end result of DPA’s innovative design approach is a surround atmosphere that is rich, smooth and fully enveloping, great in its coherence, channel separation and localization accuracy.

The 5.1 output of the 5100 runs through a multi-pin Lemo connector carrying all six channels electronically balanced, while an enclosed five-meter (16 ft), six-pair Mogami cable breaks out to six Neutrik XLR-M connectors. 

*Pictured microphone stand not included.

DPA 5100 Features

  • Plug-and-play solution
  • Lightweight and portable
  • Rich, smooth and fully enveloping sound
  • Discrete 5.1 analog output – no processing needed

DPA 5100 Specifications

Directional characteristics: Directional
Principle of operation: Pressure, with interference tube
Cartridge type: Pre-polarized condenser element
Frequency range: L, C, R, LS, RS: 20 Hz to 20 kHz; LFE: 20 Hz to 120 Hz
Frequency range, ± 3 dB: L, C, R: 200 Hz to 16 kHz; LS, RS: 100 Hz to 12 kHz; LFE: 20 Hz to 120 Hz
Sensitivity, nominal ± 3 dB at 1 kHz: L, C, R: 26 mV/Pa; LS, RS: 28 mV/Pa
Equivalent noise level, A-weighted: L, C, R: Typ. 18 dB(A) (max. 21 dB(A)); LS, RS: Typ. 20 dB(A) (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4: L, C, R: Typ. 29 dB (max. 32 dB); LS, RS: Typ. 31 dB (max. 34 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): L, C, R: Typ. 76 dB(A); LS, RS: Typ. 74 dB(A)
Total Harmonic Distortion (THD): <1% up to 123 dB
Dynamic range: L, C, R, LS, RS: 103 dB; LFE: 100 dB
Max. SPL, peak before clipping: 132 dB
Output impedance: 50 Ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Active Signal balanced
Common Mode Rejection Ratio (CMRR): 60 dB, 50 Hz - 20 kHz
Power supply: 48 V Phantom power
Current consumption: Typ. 5 mA (max. 5.5 mA)
Connector: Lemo multipin
Color: Black
Weight: 500 g (17.6 oz)
Diameter: W: 240 mm (9.4 in), H: 140 mm (5.5 in), D: 195 mm (7.7 in)
Capsule diameter: 5.4 mm (0.2 in)
Cable length: 5 m (16.4 ft)
Cable color: Black
Cable diameter: 9.3 mm (0.37 in)
Maximum output voltage: L, C, R, LS, RS: 1,8 Vrms / 2,5 Vpeak; LFE: 1 Vrms / 1,4 Vpeak
Polarity: Positive