DPA d:screet 4061 Miniature Condenser Microphone. Lo-Sens - Microdot

DPA d:screet 4061 Miniature Condenser Microphone. Lo-Sens

The DPA d:screet 4061 is a pre-polarized omnidirectional Miniature Condenser Microphone with a 5.4mm vertical diaphragm, specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. Special attention has been taken in the design to deal with the humidity problems that often occur in theatrical settings. This mic is also available with 3-pin Lemo, TA4F Mini-XLR, Mini-Jack connections.

A double vent protection system together with water resistant materials inside the microphone make it more than difficult for moisture to cause the Miniature Microphone to fail. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement of the microphone on the body.

DPA 4061 is acoustically identical with the award winning DPA 4060, but the sensitivity is adjusted to 6 mV/Pa to match some of the more sensitive transmitters on the market. The noise floor of the DPA 4061 is 26 dB(A) re. 20 AuPa and if powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the 4061 with almost all professional wireless system available. 

DPA d:screet 4061 Specifications

• Principle of operation: Pressure
• Cartridge type: Pre-polarised condenser element with vertical diaphragm
• Power supply: Min. 5 V - max 50 V through DPA adapter
• Frequency range, + 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz + 2 dB, 10 dB boost at 12 kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 AuPa (max. 28 dB(A))
• Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
• Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
• Output impedance: 30 - 40 Ohm
• Cable drive capability: Up to 300 m (984 ft)
• Microphone length: 12.7 mm (0.5 in)
• Max. SPL, peak before clipping: 144 dB
• Weight: <7.5 g (0.26 oz) incl. cable and MicroDot connector
• Cable length: 1.8 m (5.9 ft)
• Cable colour: Brown
• Dynamic Range: Typ. 97 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
• Connector: MicroDot
• Sensitivity, nominal, + 3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa