Focusrite ISA ADN2 - 2 Channel 24/192 Dante A/D Option Card for ISA One
Focusrite ISA ADN2 - 2 channel Dante A-D card for ISA One
The Focusrite ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT andS/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or syncing external equipment to the Dante network.
Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.
And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
Focusrite ISA ADN2 Features:
- Two-channel analogue-to-digital converter for ISA One
- Dante connectivity via Primary and Secondary Ethernet ports with redundancy and auto-switching in case of failure
- Two-channel RCA connection for S/PDIF output
- Word Clock I/O on BNC connectors allows for synchronisation to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
- Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
- Up to 24-bit/192kHz sample rate
- Two-channel XLR connection for AES3 output
- Two-channel TOSLINK connector for ADAT output
- RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching is required
Specifications
Audio performance
- 0 DBFS Reference Levels22dBu
- Frequency Response20Hz - 20kHz ±0.1dB
- THD+N-105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
- Noise In Presence Of Signal-121dBu 'A'-Weighted (typical)
- Dynamic Range121dB 'A'-weighted (typical), 20Hz - 20kHz
Digital performance
- Supported Sample Rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
- Clock SourcesInternal or Word Clock
Front panel output connectivity
- Channel Count2 x Dante channels
- Output1 x Male XLR
Dante
- Output2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).
- Channel Count2 x Dante channels
AES3
- Channel Count2 x Dante channels
- Output1 x Male XLR
ADAT
- Channel Count2 x ADAT channels
- Output1 x TOSLINK connectors
- Channel Assignments @ 44.1 KHz, 48 KHzPort 1 = Channels 1 - 2
- Channel Assignments @ 88.2 KHz, 96 KHz: SMUXIPort 1 = Channels 1 - 2
- Channel Assignments @ 176.4 KHz, 192 KHz: SMUXIIPort 1 = Channels 1 - 2
S/PDIF
- Channel Count2 x S/PDIF channels
- Output1 x RCA phono socket
Word clock
- Word Clock Input1 x BNC 75Ω port (Switchable Termination)
- Word Clock Output1 x BNC 75Ω port