Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Neumann TLM 103 Studio Set Microphone incl. EA1 Mount - Nickel - Ex-Showroom

by Neumann
£870.00 inc. vat
£725.00 ex. vat
SKU SNEUTLM103SSBSK
In Stock - Available for Immediate Dispatch

Neumann TLM 103 Studio Set - Nickel - Ex-Showroom

The Nickel Neumann TLM 103 Studio Set includes the TLM103 large diaphragm condenser microphone and an EA1 suspension mount. The TLM103 features a cardioid response and is perfect for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget. Ex-Showroom.

By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear.

Applications
Due to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios.

Polar pattern
The TLM 103 is equipped with a large diaphragm capsule with cardioid pattern. By focusing on this pattern – used in most recording situations – the attenuation of unwanted rear sound has been optimized. Off-axis sounds are rendered naturally while isolation is increased. This also leads to a high feedback suppression when the microphone is used in live situations or where loudspeaker playback is a factor.

Acoustic features
The TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67 / U 87 microphones.The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost.

The large wire mesh headgrille protects the capsule from plosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects.

Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration.

Electrical features
With just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM 103 is so reduced that even the smallest signals are reproduced basically noise-free. As it is capable of handling sound pressure levels up to 138 dB without distortion, the TLM 103 provides a dynamic range of 131 dB (A-weighted).

The letters TLM stand for "transformerless microphone". With TLM technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.

Neumann TLM103 Studio Set Features

  • Large diaphragm cardioid microphone
  • Pressure gradient transducer with with one-diaphragm capsule
  • Transformerless circuitry
  • Extremely low noise: 7 dB-A
  • Includes EA1 shockmount
  • Straightforward handling for homerecording and professional studios
  • High-quality professional equipment for limited budgets

Specifications

  • Acoustical operating principle: Pressure gradient transducer
  • Directional pattern: Cardioid
  • Frequency range: 20 Hz ... 20 kHz
  • Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
  • Rated impedance: 50 ohms
  • Rated load impedance: 1 kohms
  • Equivalent noise level, CCIR1): 17.5 dB
  • Equivalent noise level, A-weighted1): 7 dB-A
  • Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 76.5 dB
  • Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 87 dB
  • Maximum SPL for THD 0.5%2): 138 dB
  • Maximum output voltage: 13 dBu
  • Dynamic range of the microphone amplifier (A-weighted): 131 dB
  • Supply voltage (P48, IEC 61938): 48 V ± 4 V
  • Current consumption (P48, IEC 61938): 3 mA
  • Matching connector: XLR3F
  • Weight: approx. 450 g
  • Diameter: 60 mm
  • Length: 132 mm