TASCAM ML-16D - 16 Channel Analog Line in-out /DANTE Converter, 19", 1U

TASCAM ML-16D

The Tascam ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors. The ML-16D has 2 D-Sub inputs and 2 D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.

Specifications

• Sampling frequency: 44.1k / 48k / 88.2k / 96k Hz
• Quantization bit rate: 16 / 24-bit
• LINE INPUTS
• Connector: D-sub 25pin female × 2
• Locking screws: No.4-40 UNC (inch type)
• Nominal input levels: +4dBu, +6dBu (only when maximum input level is +15dBu)
• Maximum input levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu, (set by REF. LEVEL switches)
• Input impedance: 10kΩ or higher
• LINE OUTPUTS
• Connector: D-sub 25pin female × 2
• Connector: No.4-40 UNC (inch type)
• Output impedance: 200Ω or lower
• Applicable load impedance: 2kΩ or higher
• Nominal output levels: +4dBu, +6dBu (only when maximum output level is +15dBu)
• Maximum output levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu, (set by REF. LEVEL switches)
• PRIMARY/SECONDARY
• Connector: RJ-45 × 2
• Transmission protocol: Dante
• Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
• Cables: Category 5e or faster STP cables
• Power: AC 100 - 240V, 50/60Hz
• Power consumption: 14W
• Dimensions (W×H×D): 19.0" × 1.77" × 11.96" / 483 × 45 × 303.8 mm
• Weight: 7.3 lbs. / 3.3 kg
• Operating temperature range: 32ËšF to 104ËšF / 0ËšC to 40ËšC
• Standard accessories: Power cord, Rackmount screw kit, Owner’s Manual (including warranty)