AMS Neve 1073 DPA and Josephson C42MP

This bundle gives you two brands that are legends in their fields, the Josephson C42MP and the Neve 1073 preamp are a winning combo in any studio. The Neve 1073 DPA is a premium 2-channel Class A microphone preamplifier compacted into a single rack space. It's widely considered to be the premier mic preamp choice for many leading producers and artists, adding that Neve sound featured on thousands of legendary recordings of the past 40 years. The C42MP matched pair is a 2 microphone kit containing 2 cardioid condenser microphones that have been designed to be used for a variety of different applications like live production or studio recordings.

Features

The C42 electronics feature a selected discrete FET driving a fully balanced symmetrical transformerless discrete class-A output stage. The output impedance is low enough that very long cable runs may be used without signal degradation. Although the microphone is specified for full P48 phantom power, it will function with phantom power as low as 24 volts, with some limitation in maximum SPL.

The 1073 DPA provides the brilliant sound of Neve in a remarkably simple 1U format. Two rear Mic and Line inputs feed dual Class A gain stages, with adjustable Gain control and selectable 48V available on the Mic inputs. Class-A analogue outputs in XLR format are also found on the rear panel, controlled via adjustable front-panel Trim control, +/-10dB. This stereo unit is the perfect solution for studios looking to bring in the very essence of the famous Neve 1073 sound.

Specifications

Neve 1073 DPA

Input Impedance: Mic - switchable: 300 or 1200 OhmsLine - 20K Ohms
Frequency Response: 60dB gain into 600 Ohms (20Hz to 20kHz); +/-0.5dB60dB gain into 600 Ohms (10Hz to 40kHz); -3dB
EIN: Mic 60dB gain
THD + Noise: +20dBu into 600 Ohms <0.07% (50Hz to 10kHz) - 80kHz bandwidth
Width: 482mm (19 inches)
Height: 45mm (1.75 inches) - 1U
Depth: 254mm (10 inches)
Weight: 5kg (11 pounds)
Integral PSU: 3-pin mains IEC socket - 100-240vac auto sensing, 47-63Hz, 1.6A anti-surge fuse

Josephson C42MP

Output Level, mV/Pa: 8.5
Frequency Response (at 60 cm): 40-20,000 Hz ±2 dB from curve
Equivalent Noise Level, A-weighted: ≤21 dB
Maximum SPL (with P48 power): 135 dB
Output Impedance: 50Ω (recommended load ≥1KΩ)
Power Requirements: P48 phantom power, 4.5 mA
Temperature Range: -10 to +50°C
Dimensions: 21mm diameter, 98mm long
Weight: 80 grams (< 3 ounces)
Connector: 3 pin XLR type, pin 2 positive polarity

Filters

Bundles

AMS Neve 1073 DPA & Josephson C42MP - Bundle