DPA d:dicate™ 4041-SP Omni Large Diaphragm Mic, P48

The DPA d:dicate 4041-SP is a phantom powered, omni-directional large diaphragm condenser mic; part of DPA’s flagship Reference recording mic line.

With a 1” sensitive omni capsule that’s exceptionally quiet, the mic has a dynamic range of 126dB, a very low noise floor of 8dB and peak SPL handling of 134dB. The mics frequency response is in line with the legendary Type 4040 hybrid mic, offering transparent signal and clean neutral response adding a slight 4-6dB boost at 8kHz for vocal clarity.

Based around a modular system, the 4041’s MMC4041 preamp and body can be swapped out for the higher sensitivity, 130v solid state version (optional HMA5000 DPA mic amp required).

DPA 4041-SP Features

handles high sound pressure levels with no distortion
natural and transparent sound

DPA 4041-SP Specifications

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: 24 mm (1 in) condenser with stainless steel diaphragm
Frequency range, ± 2 dB: 20Hz - 20kHz with 4 - 6 dB soft boost at 8 kHz
Sensitivity, nominal, ± 2 dB: 70 mV/Pa; -23,1 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Max. 8 dB(A) re. 20 µPa
Equivalent noise level, ITU-R BS.468-4: Max. 20 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 86 dB(A)
Total harmonic distortion (THD): <0.5% THD up to 120 dB SPL peak, <1% THD up to 126 dB SPL peak
Dynamic range: Typ. 118 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: <200 Ohm
Cable drive capability: Up to 100 m (328 ft)
Current consumption: 2.20 mA
Connector: 3-pin XLR-M (Standard P48)
Weight: 190 g (6.7 oz)
Capsule diameter: 24 mm (1 in)
Length: 170 mm (6.69 in)

Filters

DPA Microphones

DPA d:dicate™ 4041-SP Omni Large Diaphragm Mic, P48