PreSonus Temblor T10 - 10" Active Subwoofer with built in crossover

The PreSonus Temblor® T10 delivers tight, musical, low-frequency transients and has user controls not normally available in this price range, designed to complement full-range studio reference monitors—including the PreSonus Eris® and Sceptre®—without overshadowing them.

Powerful and musical, Temblor^® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Features

Main components

10-inch, front-firing, glass-composite low-frequency transducer
Front-firing, bass-reflex acoustic port

Controls and filters

Input gain control (-30 dB to +6 dB, continuously variable)
Continuously variable lowpass filter (50 Hz to 130 Hz)
Built-in crossover
Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Polarity invert
Ground-lift switch

Power and safety

250 watt, Class AB amplification
Internal damping and heat sink
Integrated rubber feet for stable placement

Inputs and outputs

Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
Left and right balanced XLR and ¼” TRS outputs
XLR subwoofer output for connecting a second Temblor^® T10

Technical Specifications

Inputs

2- Balanced XLR
2- Balanced ¼” TRS
2- Unbalanced RCA

Outputs

2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)

Performance

Frequency Response: 20 Hz – 200 Hz
Low Pass Filter Frequency: 50 – 130 Hz (variable)
Signal-to-Noise Ratio: >98 dB (A weighted)
THD: 0.019% @ power <160W
Amplifier Power: 250W peak, 170W RMS
Power Consumption: 230W
Amplifier Type: Class AB
Peak SPL at 1m: 113 dB
Woofer: 10” glass-composite, front-firing
Acoustic Port: Front-firing bass reflex

User Controls

Input Gain Range: -30 to +6 dB
Polarity Switch: 0° or 180°
Low Pass Filter Control: 50 Hz to 130 Hz
Ground Lift Switch: On/Off
High Pass Filter Switch: On/Off
Bypass Footswitch: On/Off

Protection

RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse

Power

100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

Vinyl-laminated MDF

Physical

Width: 12.6” (320 mm)
Depth: 15.75” (400 mm)
Height: 15.75” (400 mm)
Weight: 39.46 lbs (17.9 kg)

Hot Deals

PreSonus Temblor T10 - 10" Active Subwoofer with built