DPA KIT-4099-DC-4C-C 4099 CORE Classic Touring Kit

DPA KIT-4099-DC-4C-C 4099 CORE Classic Touring Kit

The DPA KIT-4099-DC-4C-C Classic Touring Kit, features 4 DPA 4099 Microphones and assortment of accessories for a wide range of micing solutions. The microphones are super cardioid condenser microphones able to hand high SPLs that deliver more clarity and detail to your music. 

CORE by DPA is a powerful new technology at the heart of DPA miniature microphones that minimises distortion across the full dynamic range. From pianissimo to forte you will experience increased clarity and openness.

From the piano to guitar; strings to woodwinds; brass to percussion, the 4099 Series sounds equally impressive on them all. This one microphone model can beautifully reinforce an entire orchestra. You can move the mic to another instrument; just make sure you have the right type of clip to mount it correctly.The award-winning 4099 Series gives you a much more natural sound than any clip-on microphone or pickup. This condenser microphone rejects unwanted noise and accurately captures the true voice of your acoustic instrument.

What's included:

• 4 x 4099 Microphone 
• 1 x Clip for Bass
• 2 x Clip for Cello 
• 4 x extension cable 
• 4 x XLR adaptor 
• 1 x Clip for Guitar 
• 2 x Clip for Piano 
• 2 x Clip for Violin

Specifications

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB, at 20 cm (7.9 in): 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz. Second order low-cut filter at 80 Hz with DAD4099-BC
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
• Distortion, THD < 1%: 128 dB SPL RMS, 131 dB SPL peak
• Dynamic range: Typ. 108 dB
• Max. SPL, THD 10%: 142 dB SPL peak
• Rated output impedance: From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
• Output balance principle: Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
• Power supply (for full performance):
• For wireless systems: Min. 5 V - max. 10 V through DPA adapter
• With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
• Connector: MicroDot
• Microphone diameter: 5.7 mm (0.22 in)
• Microphone length: 45 mm (1.8 in)
• Cable length: 1.8 m (5.9 ft)
• Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Gooseneck length: 140 mm (5.5 in)
• Sensitivity selection tolerance (at 1 kHz): ±1 dB