Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

PMC 6-2 Active 3 way monitor with a 2 x 6.5 inch bass units 55mm Soft dome mid-range - Pair

by PMC
£9,828.00 inc. vat
£8,190.00 ex. vat
SKU SPMCPMC62
In Stock - Available for Immediate Dispatch

PMC 6-2 Active 3 way monitor with a 2 x 6.5 inch bass units 55mm Soft dome mid-range - Pair

The PMC6-2 is the all new active 3-way studio monitor that provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.

This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.

A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.

Features

  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
    Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
  • Ceiling-mount yoke allows suspension in multi-channel or immersive systems

Specifications

  • TypeActive 3-way nearfield reference monitor with ATL™ bass loading
  • Drive Unit Complement:
    • LF 2 x PMC 150mm (6”) studio 6 drivers
    • MF PMC 55mm (2”) soft dome mid-range
    • HF PMC 27mm (1”) soft dome tweeter
  • Effective ATL™ Length2m (6.6ft)
  • Frequency Response33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
  • Sensitivity+4dBu input signal = 98dB SPL @ 1m
  • Max continuous SPL109dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Max Peak SPL121dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Directivity:
    • H +/-50 degrees
    • V +60/-40 degrees (-6dB off axis @10kHz)
  • Input:
    • XLR switchable between analogue & digital AES3
    • Analogue input
    • - +20/+24dBu max. input level (selectable)
    • - 22K ohm input impedance
    • Digital input
    • - 16/24-bit AES3 signal, left, right or left + right
    • - 18 - 192kHz Sample Rate
    • - 110 ohm input impedance
    • Expansion card slot
    • - For future connectivity upgrades
  • OutputXLR digital AES3 (fixed 24-bit @ 96kHz)
  • NetworkRJ45 for use with PMC SoundAlign web interface
  • Features:
    • Level Trim: (+/-10dB)
    • High-pass filter: (20 - 200Hz, 12dB/Oct)
    • Delay: (0 - 30mS)
    • Phase: (normal or inverted)
    • LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
    • Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
    • User presets: (3 + factory defaults)
  • Latency2.4mS
  • Amplifier power per channel
    • LF 2 x 400Wrms
    • MF 1 x 400Wrms
    • HF 1 x 400Wrms
  • Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14)
  • Power consumption (idle)50W
  • Power consumption (max)1500W
  • Cabinet dimensions
    • H 400mm (15.7”)
    • W 430mm (16.9”)
    • D 372mm (14.6”)
  • Weight21.3kg (47lbs) each