Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Quested SB10RDM - Remote powered dual mono sub 2 x SB10R and 1 x remote power SBC250

by Quested
£2,760.00 inc. vat
£2,300.00 ex. vat
SKU SQUESB10RDM
Please contact us for availability.

Quested SB10RDM - Remote powered dual mono sub

The Quested SB10RDM are dual mono subs that are remotely powered using a SBC250 remote. Delivering a clean bass response as low as 25Hz, the SB10R provides the powerful bass you need. The SBC250 controller allows you to easily integrate the sub with any system.

Features

  • 10" Driver
  • Variable Crossover from 40Hz to 135Hz
  • Gain control from -14db to +6db
  • Up to 160 degrees of phase control
  • Polarity Switch
  • Output level metering
  • Bypass function
  • 1U rack unit

Specifications

SB10R

  • Dimensions: Cabinet 600(w) x 332 (h) x 300(d) mm SBC250 Controller – 1U case 270mm deep
  • Weight:
    • Cabinet – 19.8 kg / 43.4 lb
    • SBC250 Controller – 5.5 kg / 12 lb
  • Drivers: Bass cone 1 x 250mm (10”)
  • Frequency Response: User Adjustable. 25 Hz-200 Hz ± 2 dB / 17 Hz-200 Hz -6 dB
  • Maximum SPL: 110 dB continuous pink noise @ 1 m LEQ 1 min
  • Connector: 2 off XLR and ¼ inch jack combo socket
  • Impedance: 10k W electronically balanced with RF filters
  • Wiring:
    • Pin 1 ground Sleeve
    • Pin 2 hot Tip
    • Pin 3 cold Ring
  • OUTPUTS: 
    • Left and Right Monitor 2 off XLR type male left right outputs
    • Impedance 100 ohm electronically balanced
    • Wiring Pin 1 ground, Pin 2 hot, Pin 3 cold
  • Sub Bass Output: 1 pair binding posts
  • FILTERS: Left & Right Input Summed to Sub Output
  • Subsonic/High Pass: -3dB @ 14Hz, 24dB/oct or -3dB @ 28Hz, 24dB/oct (set by internal jumper)
  • Low Pass: -3dB @ 40Hz to 135Hz, externally adjustable @ 24db/oct or full range on CH A
  • Left & Right Input to Left & Right Output
  • Ultrasonic: -1dB @ 100k
  • High Pass: -3dB @ 40Hz to 135Hz, externally adjustable @ 24db/oct or full range on CH A

SBC250

  • THD
  • 210W rms continuous
  • 0.03% at levels up to 1dB below clip, 20Hz – 120Hz typ
  • 0.005% @ 20W rms 100Hz
  • Hum & Noise: -100 dB referred to clip
  • POWER REQUIREMENTS:
  • Set by internal plug: normal 115V or 230V setting:
  • Min 160V (restricted output power):
  • Max 255V 115V setting:
  • Min 80V (restricted output power):
  • Max 127V