Sony UWP-D11 with DPA 4080 Directional Lavalier Mic Bundle

Sony UWP-D11 with DPA 4080

This Sony and DPA bundle consists of the sony UWP-D11 belt-pack wireless transmitter, receiver and a DPA 4080 lavalier microphone. The UWP-D11 belt-pack wireless microphone package offers the sound quality of digital audio processing combined with the reliability of analogue FM modulation, while the 4080 miniature cardioid mic is delivered with a pre-mounted black pop filter in a holder with an integrated shock mount, fixed on a clip.

The package includes the UTX-B03 belt-pack transmitter and URX-P03 portable receiver. Also included is a high quality omni-directional lavalier microphone and a range of accessories including windscreen, microphone holder clip, belt-clip and shoe-mount adaptor.The UWP-D11 package offers wide frequency coverage with up to 72 MHz bandwidth (depending on region) across a wide range of channels, with a choice of models to choose from. An additional white pop filter is enclosed. Because of the flexible and practical mounting solution, the microphone can easily be turned in all directions and fits both left and right buttoned shirts.

Features

• Excellent speech reproduction
• Discreet, compact design
• Fits both left and right buttoned shirts
• Delivered with both black and white pop filters
• Modular adapter system fits most professional wireless systems
• Digital Audio Processing for high quality sound
• Complete package
• Wide frequency coverage with choice of channels available
• Large display and small size receiver
• Easy to use features

Specifications

URX-P03

• Oscillator Type: Crystal-controlled PLL Synthesizer
• Reception Type: Space diversity
• Antenna Type: 1/4 wave length wire
• Frequency Response: 23Hz to 18kHz (typical)
• Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
• Distortion (T.H.D): 0.9% or less (-60dBV, 1kHz input)
• Audio Delay: Approx. 0.35 msec
• Analog Output: 3-pole mini jack, unbalanced
• Analog Output Level: -60dBV (at ±5kHz deviation)
• Analog Output Adjust Range: -12dB - +12dB (3dB step)
• Headphone Output: φ3.5 mm ( 5/32 inch) stereo mini jack
• Headphone Output Level: Max. 10mW (at 16ohm load)
• Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
• Display: LCD
• Dimensions: 63 x 82 x 23.8mm (excluding the anntenas) (W x H x D)

UTX-B03

• Oscillator Type: Crystal-controlled PLL Synthesizer
• Antenna Type: 1/4 wave length wire
• Type of Emission: F3E
• Capsule Type: Electret condenser
• Directivity: Omni-directional
• Input Connector: 3-pole locking mini jack
• Reference Input Level:
• MIC: -60 dBV (at 0-dB attenuator level)
• LINE: +4 dBu
• Audio Attenuator Adjustment Range: 0 dB to 21 dB (in 3-dB steps): Mic input
• Frequency Response: Americas, Europe, UAE, South Africa, Australia, Malaysia, Vietnam, New Zealand: Transmission 23 Hz to 18 kHz (typical)
• Frequency Response: China, Thailand, Taiwan, Singapore, South Korea: Transmission 23 Hz to 18 kHz (typical)
• Frequency Response: Japan: Transmission 40 Hz to 15 kHz (typical)
• Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
• Audio Delay: Approx. 0.35 msec
• Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
• Display: LCD
• Dimensions: 63 x 82 x 20 mm (excluding the anntenas) (W x H x D)

DPA 4080

• Directional pattern: Cardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ±2 dB: 250 Hz - 17 kHz with typ. 4 dB soft boost at 4 - 6 kHz (-5 dB at 100 Hz)
• Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
• Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
• Dynamic range: Typ. 100 dB
• Max. SPL, peak before clipping: 134 dB
• Output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft)
• Power supply (for full performance): Min. 5 V - max. 50 V through DPA adapter for wireless systems or 48 V phantom power ±4 V with DAD6001-BC XLR adapter
• Connector: MicroDot
• Color: Black
• Weight: 15 g (0.5 oz) incl. Cable and MicroDot connector
• Microphone diameter: 10 mm (0.4 in)
• Capsule diameter: 5.4 mm (0.21 in)
• Microphone length: 30 mm (1.2 in)
• Cable length: 1.2 m (3.9 ft)
• Cable color: Black
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%