Glensound DIVINE Intelligent Network Audio Monitor (Single)

The Glensound DIVINE is a powered network audio monitor. Internally a Digital Signal Processor (DSP) takes careful care of the audio signals, including state of the art compression and limiting circuits, while a microprocessor provides full setup and control via a small rear panel LCD. Control of setup and day to day operation of the Divine will also be available on our Windows 10 application GlenController including the ability to group multiple Divines together and control their level simultaneously.

Divine can receive up to four* Dante (AES67 compliant) audio over IP (AoIP) inputs. These inputs can be selected by the user on a large clear front panel select switch. The four audio inputs can also be easily mixed together and their individual levels adjusted.

Features

Audio monitor speaker for Dante/AES67 networks
PoE powered so just a single cable connection
Monitors 4 incoming Dante/AES67 channels
Select between monitoring individual inputs, pairs, or all 4 inputs
Set priority override on one input to interrupt another (paging over programme audio for example)
Set EQ mode for music or voice priority
LF Cut
Gain boost
Lock all functions or adjustments for security
All LEDs can be set to dark mode for use in black out areas
Front input select LEDs can be set as a PPM meter
Each individual input LED can be set as a tricolour single LED meter for that input
Configuration screen on rear
VESA 75mm bracket and mic arm mounting options
Includes 2m Ethernet cable
Remote control across network using GlenController
Upgrade individual or batch Divine units across a network with GlenController

Specifications

Audio

Amplifier Type Low Noise Class D
Amplifier Power 10 Watts
Amplifier THD + Noise 0.02% @ 1 Watt @ 1kHz
Digital Line Up User selectable -24, -20 -18 dBFs
Input Gain Boost 0, +6, +12 +18dB
Input Channel Gain Trim +/-16 dB
Loudspeaker Impedance 8 Ohms
Loudspeaker Cone Type Poly damped woven glass fibre with copper cap and rubber surround
Loudspeaker Magnet High energy ferrite
LF Cut User selectable (on/off ) Knee X Hz 12dB/Octave
Voice EQ Frequency Settings 300Hz to 3kHz 12dB/ Octave

Network

Connector Neutrik EtherCON (mates with standard RJ45)
Type 100 Mbit/s
AoIP Audio Dante® Audinate Ultimo chipset (AES67 Compliant)
AoIP Audio Sample Frequency 4 channels @ 48k or 2 channels @ 96k (Dante® only)
AoIP Resolution Up to 24 Bit

Power

PoE Powered by PoE, Complies to: IEEE 802.3af-2003, Classification Class 0
Consumption 12.8 Watts
PoE Source Can be powered by PoE enabled network switches or Mid-Span PoE injectors
Energy Saving Mode Automatic energy saving mode (shuts down power amplifier when no audio present)
User settable delay 15, 30 & 60 mins.

Physical

Size 190 x 128 x 100mm (HxWxD) 7.5 x 5 x 3.9"
Weight 1.725Kg 3lb12oz
Mechanics Bespoke diecast aluminium chassis. Powder coated and printed with UV stable ink.
Mounting Points 75 x 75mm (2.95 x 2.95") VESA mount 2 of mic stand thread socket 5/8" 27tpi
Packaging Printed Retail cardboard box, packed inside plain rugged cardboard box
175 x 145 x 225mm (WxDxH)
Individual Shipping Weight 1.975Kg

Filters

Studio Monitoring

Glensound DIVINE Intelligent Network Audio Monitor (Single)