Audient ORIA USB Audio Interface & Immersive Monitor Controller with Dante Card Fitted
Audient ORIA USB Audio Interface & Immersive Monitor Controller with Dante Card Fitted
The Audient Oria with Dante Card is Oria's immersive audio interface and monitor controller, supplied with the Dante (AoIP) expansion card already fitted at the factory. It runs up to 9.1.6 Dolby Atmos systems and gives you calibrated, low-latency monitoring. The Dante card adds 16 networked input channels, so Oria can sit on an existing Dante network as a standalone immersive monitor controller with no computer interface in between. That makes it a good fit for post-production suites, multi-room facilities, and colleges and universities.
Room correction runs on Oria's own dual-processor DSP. Trim, delay, bass management and 8-band EQ are applied to every output, so your DAW's CPU stays free and monitoring latency stays low. You can calibrate by hand, or use the included SoundID Reference measurement microphone with Sonarworks SoundID Reference for Multichannel (a 60-day trial is included). Up to 32 Profiles can be stored on the unit and switched from the front panel, the desktop app, an iPad, Stream Deck or an Avid EUCON surface.
Key Features:
-
Dante card factory fitted:
The card is installed before Oria leaves the factory and covered by the standard warranty. It adds one RJ45 network port and 16 Dante input channels at 44.1–96kHz, 24-bit. Oria appears as a receiver in Dante Controller. -
Up to 9.1.6 immersive monitoring:
16 balanced analogue surround outputs and 16 AES outputs (8 pairs), plus two relay-switched stereo outputs for your nearfields. -
Three ways to feed it:
Use it as a USB-C audio interface, as a standalone monitor controller via 2 x ADAT inputs (16 channels), or over Dante. -
Onboard speaker processing:
Per-output trim, delay, crossover (bass management) and 8-band EQ, with up to 32 Profiles for different formats, speakers and target curves such as Dolby X-Curve. -
Dolby Renderer integration:
Control the Dolby Atmos Renderer's downmixes from Oria to check your mix in 7.1, 5.1, stereo and more. -
Full monitor control:
Colour-coded speaker groups, individual and group solo/mute, master volume, cut, dim, global (lip-sync) delay and per-channel metering. -
Remote control:
Free Oria Control iPad app, Elgato Stream Deck support and Avid EUCON integration, so the unit can be racked out of reach. -
Audient console mic preamps:
Two remote-controlled Audient console preamps (mic, line or Hi-Z DI) with 60dB of gain, for recording or plugging in the reference mic. -
High-performance conversion:
126dB dynamic range on the DAC and 122dB on the ADC, with two independent headphone outputs and a low-latency software mixer with three cue mixes. -
Built for the studio:
1U rack unit with an 8mm faceplate, steel chassis and silent fanless design, plus word clock in and out on BNC.
In the Box:
- Audient Oria with Dante card factory fitted
- Sonarworks SoundID Reference measurement microphone
- 60-day trial of SoundID Reference for Multichannel
- USB-C to USB-C cable
- IEC mains cable
Specifications:
- Channels: 34 inputs (2 analogue, 16 ADAT, 16 Dante) / 38 outputs (20 line, 2 stereo headphone, 16 AES)
- Dante (AoIP): 16 inputs, 44.1–96kHz, 24-bit, 1 x RJ45
- Surround outputs: 16 x balanced 1/4" jack, +18dBu, 126.5dB dynamic range, THD+N 0.0006%
- Stereo outputs: 2 x stereo pairs, 1/4" jack (relay switched)
- AES outputs: 16 channels (8 x AES streams) on D-Sub
- ADAT inputs: 2 x optical, 16 channels at 44.1/48kHz or 8 channels at 88.2/96kHz (SMUX)
- Mic/line/DI inputs: 2 x XLR/jack combo, 60dB gain, EIN -129dB, +18dBu max
- Headphone outputs: 2 x independent stereo 1/4" jack
- Word clock: BNC in and out, 44.1–96kHz
- Round-trip latency: 6.3ms at 48kHz / 5.4ms at 96kHz
- Resolution: up to 24-bit / 96kHz
- Computer connection: USB-C (USB 2.0), macOS and Windows
- Power: internal PSU, 85–264V AC, 47–63Hz, IEC inlet
- Format: 19" 1U rackmount, fanless