PMC 6-2-XBD Active monitor system - PMC 6-2 Pair and 2 x PMC 8-2 L/R SUB
£16,300.00 ex. vat
PMC 6-2-XBD Active monitor system - PMC 6-2 Pair and 2 x PMC 8-2 L/R SUB
This PMC6-2-XBD system combines the PMC6-2’s unrivalled clarity and resolution with the PMC8-2 active sub to form a perfectly integrated full-range monitoring system that is ideal for all high-end music production.
In the case of the PMC6-2, configuring it as an XBD system reinforces the bass output of the main speaker’s LF drivers, greatly increasing headroom and extending the bass down to 25Hz, creating a system with a sense of effortless capability.
Configuring the PMC6-2 XBD system is simple; connect the input directly to the PMC6-2, and add an AES3 digital cable to carry the main monitor’s ‘through’ output down to the PMC8-2 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign™ browser-based software via the LAN connection, where both speakers appear as a single PMC6-2 XBD unit when linked.
Features
- 3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading
- Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
- State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W, SUB(XBD) 2 x 400W
- Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- Optional dedicated 19” floor stands
Specifications
PMC6-2
- Type: Active 3-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement:
- LF 2 x PMC 150mm (6”) studio 6 drivers
- MF PMC 55mm (2”) soft dome mid-range
- HF PMC 27mm (1”) soft dome tweeter
- Effective ATL™ Length: 2m (6.6ft)
- Frequency Response: 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity: +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL: 109dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL: 121dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity:
- H +/-50 degrees
- V +60/-40 degrees (-6dB off axis @10kHz)
- Input:
- XLR switchable between analogue & digital AES3
- Analogue input
- - +20/+24dBu max. input level (selectable)
- - 22K ohm input impedance
- Digital input
- - 16/24-bit AES3 signal, left, right or left + right
- - 18 - 192kHz Sample Rate
- - 110 ohm input impedance
- Expansion card slot
- - For future connectivity upgrades
- Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network: RJ45 for use with PMC SoundAlign web interface
- Features:
- Level Trim: (+/-10dB)
- High-pass filter: (20 - 200Hz, 12dB/Oct)
- Delay: (0 - 30mS)
- Phase: (normal or inverted)
- LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
- Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
- User presets: (3 + factory defaults)
- Latency: 2.4mS
- Amplifier power per channel
- LF 2 x 400Wrms
- MF 1 x 400Wrms
- HF 1 x 400Wrms
- Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle): 50W
- Power consumption (max): 1500W
- Cabinet dimensions
- H 400mm (15.7”)
- W 430mm (16.9”)
- D 372mm (14.6”)
- Weight: 21.3kg (47lbs) each
PMC8-2
- Type: Active 3-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement:
- LF 2 x PMC 200mm (8”) studio 8 drivers
- MF PMC 55mm (2”) soft dome mid-range
- HF PMC 27mm (1”) soft dome tweeter
- Effective ATL™ Length: 3m (9.8ft)
- Frequency Response: 25Hz - 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity: +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL: 113dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL: 125dB @1m, (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity:
- H+/-45 degrees
- V+/-50 degrees (-6dB off axis @10kHz)
- Input:
- XLR switchable between analogue & digital AES3
- Analogue input
- - +20/+24dBu max. input level (selectable)
- - 22K ohm input impedance
- Digital input
- - 16/24-bit AES3 signal, left, right or left + right
- - 18 - 192kHz Sample Rate- 110 ohm input impedance
- Expansion card slot
- - For future connectivity upgrades
- Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network: RJ45 for use with PMC SoundAlign web interface
- Features:
- Level Trim: (+/-10dB)
- High-pass filter: (20 - 200Hz, 12dB/Oct)
- Delay: (0 - 30mS)
- Phase:(normal or inverted)
- LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
- Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
- User presets: (3 + factory defaults
- Latency: 2.4mS
- Amplifier power per channel:
- LF 2 x 400Wrms
- MF 1 x 400Wrms
- HF 1 x 400Wrms
- Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle): 50W
- Power consumption (max): 1500W
- Cabinet dimensions:
- H 534mm (21”)
- W 551mm (21.7”)
- D 440mm (17.3”)
- Weight: 39kg (86lbs) each