PMC 6-XBD Active monitor system - PMC 6 Pair and 2 x PMC 8 SUB
£9,600.00 ex. vat
PMC 6-XBD Active monitor system - PMC 6 Pair and 2 x PMC 8 SUB
The PMC6-XBD active monitoring system combines the PMC6 monitors and PMC8 SUB proving genuine midfield monitor performance in a compact system. by combing the PMC 8s and the PMC6 monitors, the speaker becomes a true three-way design. Also, since the mid-bass driver no longer handles the lowest bass frequencies, distortion is reduced, headroom is extended, and the mid-range frequencies gain extra clarity to lend vocals still greater realism and depth.
It’s simple to configure the PMC6 XBD system; connect the input directly to the PMC6, and add an AES3 digital cable to carry the main monitor ‘through’ output down to the PMC8 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign™ browser-based software via the LAN connection, where both speakers appear as a single PMC6 XBD unit when linked.
Features
- 3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading
- Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
- State-of-the-art Class-D amplifiers: HF 200W, LF 200W, SUB(XBD) 300W
- Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
Specifications
PMC6
- Type: Active 2-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement:
- LF PMC 150mm (6”) studio 6 driver
- HF PMC 27mm (1”) soft dome tweeter
- Effective ATL™ Length: 1.8m (5.9ft)
- Frequency Response: 39Hz - 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity: +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL: 106dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL: 118dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity
- H +/-60 degrees
- V +50/-40 degrees (-6dB off axis @10kHz)
- Input
- XLR switchable between analogue & digital AES3
- Analogue input
- - +20/+24dBu max. input level (selectable)
- - 22K ohm input impedance
- Digital input
- - 16/24-bit AES3 signal, left, right or left + right- 18 - 192kHz sample rate
- - 110 ohm input impedance
- Expansion card slot
- - For future connectivity upgrades
- Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network: RJ45 for use with PMC SoundAlign web interface
- Features:
- Level Trim: (+/-10dB)
- Orientation: (portrait, landscape, auto)
- High-pass filter: (20 - 200Hz, 12dB/Oct)
- Delay: (0 - 30mS)
- Phase: (normal or inverted)
- LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
- Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
- User presets: (3 + factory defaults)
- Latency: 2.4mS
- Amplifier power per channel
- LF 1 x 200Wrms
- HF1 x 200Wrms
- Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle): 35W
- Power consumption (max): 400W
- Cabinet dimensions Portrait:
- H400mm (15.7”)
- W 215mm (8.5”)
- D 372mm (14.6”)
- Cabinet dimensions Landscape
- H 215mm (8.5”)
- W 400mm (15.7”)
- D 372mm (14.6”)
- Weight: 11.1kg (24.4lbs) each
PMC8 SUB
- Type: Active subwoofer with an 8-inch bass driver and ATL™ bass loading
- Drive Unit Complement:
- LF PMC 200mm (8”) studio 8 driver
- Effective ATL™ Length: 3m (9.8ft)
- Frequency Response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
- Sensitivity: +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL: 109dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL: 121dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Input
- XLR switchable between analogue & digital AES3
- Analogue input
- - +20/+24dBu max. input level (selectable)
- - 22K ohm input impedance
- Digital input
- - 16/24-bit AES3 signal, left, right or left + right
- - 18 - 192kHz Sample Rate
- - 110 ohm input impedance
- Expansion card slot
- For future connectivity upgrades
- Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network: RJ45 for use with PMC SoundAlign web interface
- Features:
- Level Trim: (+/-10dB)
- High-pass/Low-pass filter: (20 - 200Hz, 12dB/Oct)
- Delay: (0 - 30mS)
- Phase: (normal or inverted)
- LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
- Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
- User presets:(3 + factory defaults)
- Latency: 2.4mS
- Amplifier power: 300Wrms
- Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption: (idle)25W
- Power consumption: (max)300W
- Cabinet dimensions:
- H 266mm (10.5”)
- W 551mm (21.7”)
- D 440mm (17.3”)
- Weight: 18.5kg (40.8lbs) each