Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

ART-PROSPLIT - HighPerf. Mic Splitter

by ART
£58.01 inc. vat
£48.34 ex. vat
SKU SARTPROSPLIT
Usually Ships in 1-3 Business Days.

ART-PROSPLIT

The ART-PROSPLIT is a professional mic splitter that provides one direct output and one transformer isolated output from a single microphone. This splitter can work with more than 1 other device at a time, with the ability to send output to the front of house mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ProSplit includes a switch on the isolated output to reduce noise caused by ground loops between connected equipment. For versatility the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a preamplified signal to the two microphone-level outputs.

Specifications

  • Frequency Response: 20Hz to 20kHz, ±0.25dB @ -15dBu -3dB@approx.165Hz
  • Total Harmonic Distortion:
    • <0.26% from 20Hz to 20kHz, -15dBu input
    • <0.1% from 45Hz to 20kHz, -15dBu input
    • 0.002% Typical @ 1kHz, -15dBu input
  • Phase Shift: <10 degrees @ 20kHz (Ref, 1kHz)
  • Input Impedance: >1.1k Ω @ 1kHz (Typical driving source impedance is 150 Ω)
  • Ouput Impedance: <255 Ω @ 1kHz (Typical output load impedance is 1k Ω)
  • Maximum Input Level: -1.4dBu @ 20Hz/+3.5dBu
  • CMRR: >105dB @ 60Hz / >80dB @ 3kHz
  • Insertion Loss: Approximately 2dB @ 1kHz
  • Maximum Input Level For 1% THD: -1.4dBu @ 20Hz/+3.5dBu @ 30Hz / +9.4dBu @ 50Hz
  • Dimensions: 1.85" H x 4.6" W x 3.5"D (47mm x 117mm x 89mm)
  • Weight: 0.9 lbs (0.4 kg)