Audio Technica U857R - Cardioid Condenser Adapter-mount Gooseneck Microphone
£184.72 ex. vat
Audio Technica U857R
Designed for flexible performance in boardroom, school, government, house of worship and other installed applications, the high-performance Audio Technica U857R features a small-diameter gooseneck with virtually no 'memory'. Its ultra-flexible, robust design permits easy adjustment into desired shape while resisting inadvertent repositioning.
This cardioid condenser adapter-mount gooseneck microphone direct mounts to any 5/8"-27 stand; it is 12.01" long. Equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference, the U857R accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
Audio Technica U857R Features
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no 'memory' permits quick positioning into desired shape
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
- Direct mounts to any 5/8"-27 stand, or to included threaded mounting flange
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 115 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Switch: Flat, roll-off
- Cable: 9.8' (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
- Accessories: AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8153 two-stage foam windscreen
View on the Audio Technica Europe Website.