Avedis MD7 - 500 Series Mic/Line Preamp Module
£790.83 ex. vat
Avedis MD7
The Avedis MD7 is a professional preamp that addresses the features needed in op-amp based preamps and, more importantly, with a very musical sound without the conventional hard sounding and mid-forward units which are not suitable for today’s digital recordings separating it from other preamps of its kind. This unit is built to last and features durable rotating knobs, DI input/return jack, send and high pass filter switch rolling bass off under 80Hz.
Features
Standard 500 series modular size 1.5″ x 5.25″
Gain range from 0dB – 64dB in 4dB steps for recall-ability
Input Trim control for fine control of gain
TransDrive circuitry for slight saturation at peaks
Utilizes the discrete 1122 op-amp known for depth and resolution
All discrete design with Class A buffer amplifier
Wide bandwidth, high headroom, very low noise
NO PAD, NO IC’s, and NO Surface Mount Components
Line Input to interface with DAW's
Phase reverse, and filtered 48V phantom power
High Pass Filter using a gentle slope for natural bass roll-off (-3dB @ 80Hz)
10 Meg-ohm high impedance DI input great for all instrument pickups
SEND feature to run signal through stomp boxes for variety of effects
Perfect for using as a re-amplification device
Specifications
- Frequency Response: <10Hz to -3dB at 75kHz
- Mic Input Impedance: ≅1500 ohms
- Line Input Impedance: 10k ohms
- Output Impedance: <75 ohms
- DI Input Impedance: 10M Ohms
- SEND Output Impedance: 300 Ohms
- Common Mode Rejection Ratio: >123dB min @ 60Hz
- Maximum Output Level: +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω
- Power Requirements: ±16 vdc @ 35mA per rail
- Gain Voltage: 0 to 22 Volts
- Gain dB: 0 to 64.7 dB
- Equivalent Input Noise: −114 dBu; Unweighted 300kHz bandwidth
- Weight: 2.6 lbs / 1.18kg