Beyerdynamic TG D71 Condenser Boundary Microphone
£190.00 ex. vat
Beyerdynamic TG D71 Condenser Boundary Microphone
The BeyerDynamic TG D71 is a half-cardioid boundary microphone designed for miking bass drums without the need for additional mounting materials. The high impulse fidelity and max. DPL of 148dB makes the D71 ideal for capturing percussion, as well as grand, and upright pianos.
The rugged housing in a slim, compact design protects the microphone against damages in the rough daily use on stage. For a permanent installation on a surface there are two mounting holes at the bottom of the microphone. The microphone is provided with an integrated pre-amp and can be powered on microphone inputs supplying 11 to 52 V phantom power. A red illuminating status LED displays the applied phantom power and in this way the operating status of the microphone.
Features
- Extremely rugged housing in a compact, slim design
- Optimal for Bass or Cajon drums
- Flexible use with low-frequency instruments
- Half-cardioid polar pattern for maximum gain before feedback
- High impulse fidelity and low attack time
- Undistorted transmission of even high volumes
- Powerful, natural sound
- Integrated pre-amp
- Phantom power 11 - 52 V
- Non-slip rubber bottom
Technical Specifications
- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Half-cardioid
- Frequency response: 25 - 20,000 Hz
- Open circuit voltage: 1.5 mV/Pa (-56 dBV)
- Nominal impedance: < 200 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL at 1 kHz: 148 dB [SPL@1% THD]
- Signal-to-noise ratio: 63 dB [A, RMS], 50 dB [CCIR, Q-Peak]
- Noise voltage: 1.1 µV [A, RMS], 4.9 µV [CCIR, Q-Peak]
- A-weighted equivalent SPL: 31.2 dB
- Polarity: Positive pressure produces positive voltage on pin 2 in relation to pin 3
- Wiring: bal. with 3-pin XLR male
- Connection: XLR, 3-pin, male
- Power supply: Phantom power
- P48 (+48 VDC ±4 VDC, 6.8 kΩ ±20%, current consumption: < 3.2 mA)
- P24 (+24 VDC ±4 VDC, 1.2 kΩ ±20%, current consumption: < 3.2 mA)
- P12 (+12 VDC ±4 VDC, 680 Ω ±20%, current consumption: < 3.2 mA)
- Dimensions without connector (L x W x H): 90 x 86 x 27 m