Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

DPA ST2006C - d:dicate™ 2006C Stereo Pair with Clips and Windscreens in Peli Case

£1,488.00 inc. vat
£1,240.00 ex. vat
SKU SDPAST2006C
Usually Ships within 48 hours.

DPA ST2006C - d:dicate™ 2006C Pair

The DPA d:dicate ST2006C Stereo Pair is a twin diaphragm compact omni-directional condenser microphone set. Based on DPA’s popular 4006C omni mic, the 2006C shares much of the same design and performance from the 4000 edition, but is available at a more affordable price for budget concious customers. 

 The 2006A features two opposite facing diaphragms which are rebuilt into a single capsule composition. This means the mic has the advantages of a small capsule, with a fast impulse response and a large frequency bandwidth, but has lower inherent noise thanks to its larger overall diaphragm surface area.

The body is more compact than its big brother, the 2006A making it much easier to position and features a MMP-C pre-amplifier that adds a subtle boost to the low end. The mic is also of a modular design, meaning it’s easy to swap out the capsule to change the pick-up pattern.

DPA ST2006C Features

    • Sensitivity selected pair
    • Compact size and authentic sound
    • Full-bodied sound from a small-bodied mic
    • PeliTM Case transportation and protection

    DPA ST2006C Specifications

    • Directional pattern: Omnidirectional
    • Principle of operation: Pressure
    • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
    • Frequency range: 20 Hz to 20 kHz
    • Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
    • Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
    • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
    • Dynamic range: Typ. 114 dB
    • Max. SPL, peak before clipping: 134 dB
    • Minimum load impedance: 2 kohm
    • Output impedance: < 200 ohm
    • Cable drive capability: 100 m (328 ft)
    • Output balance principle: Impedance balancing with Active Drive
    • Common Mode Rejection Ratio (CMRR): > 50 dB
    • Power supply (for full specifications): 48 V Phantom power (± 4 V)
    • Current consumption: 2.8 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • Color: Matte black
    • Microphone weight: 60 g (2.1 oz)
    • Microphone diameter: 19 mm (0.75 in)
    • Microphone length: 58 mm (2.3 in)
    • Output voltage, RMS: > 4 V
    • Polarity: +V at Pin 2 for positive sound pressure
    • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
    • Relative Humidity (RH): Up to 90%