Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Earthworks CTF10-SS - Table Top Gooseneck Microphone - Stainless Steel

£729.00 inc. vat
£607.50 ex. vat
SKU SEARCTF10SS
Usually Ships in 1-3 Business Days.

Earthworks CTF10-SS

The Earthworks CTF10-SS is a Stainless Steel table top microphone that features a robust and reliable 10” gooseneck. Optimized for speech, the CTF microphones feature a frequency response out to 30kHz that delivers the highest level of speech intelligibility and articulation. This means less straining to understand the words being spoken due to poor audio quality, so more time can be spent understanding the message being transmitted.

Whether speaking directly on-axis or to the sides of the microphone, the CTF microphone always reproduces the speaker’s voice with incredible clarity and intelligibility. This wider coverage also means that fewer Earthworks microphones are required to properly cover a conference room, cutting down on the number of channels of DSP, cables and other ancillary equipment required for the system. Compatible with all DSP systems that provide 24-48V phantom power, the CTF microphones can easily integrate into existing system designs or new installations.

Construction
Measuring just 4.1 inches in diameter, the CTF microphone’s sleek design fits seamlessly into any room. It features a slim 0.375“ (9.5mm) gooseneck that allows precise positioning of the microphone for optimal coverage. The CTF comes with a 10 ft (3.04m) low profile cable with XLR-3M attached, which is designed to exit from the side or bottom of the microphone. The XLR can be removed, allowing the cable to run through a small hole in the table surface for permanent installation. Two 6-32 screw holes and a keyhole are found on the bottom of the microphone for secure mounting, if required.

Features

  • 30kHz frequency response optimized for speech
  • Ultra high intelligibility
  • More gain before feedback
  • Near perfect cardioid polar pattern
  • RF resistant
  • Rubber, shock absorbing pads eliminate vibration noise
  • Designed to allow cable to exit from the rear or bottom of the microphone
  • Low profile design
  • Only 4.1 inches (10.4cm) in diameter
  • Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities, worship facilities and ambient room miking

Specifications

  • Frequency Response: 20Hz to 30kHz
  • Polar Pattern: Cardioid
  • Sensitivity: 20mV/Pa (-34dBV/Pa)
  • Power Requirements: 24-48V Phantom, 10mA
  • Max Acoustic Input: 139dB SPL
  • Output: XLR-3 (pin 2+)
  • Output Impedance: 65Ω balanced
  • Min Output Load: 1K between pins 2 & 3
  • Noise: 16dB SPL equivalent (A weighted)
  • Base Dimensions: 4.1 x 4.1 x 0.45 inches (104.1 x 104.1 x 11.4mm)
  • Gooseneck Dimensions: 10″ or 12″
  • Cable Length: 10’ (3.04m) with installed XLR-3M
  • Connector Type: Low profile cable terminated into a 3-pin XLR-M
  • Weight: 0.5 lbs. (226g)