Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Earthworks DK3 - 3 Microphone Drum Kit Set inc. 2 x SR25, 1 x SR20LS

£1,299.00 inc. vat
£1,082.50 ex. vat
SKU SEARDK3
In Stock

Earthworks DK3 - 3 Microphone Drum Kit Set inc. 2 x SR25, 1 x SR20LS

The Earthworks DK3 Drum Kit System gives you everything you need to mic a drum kit using a classic 3-mic setup. You get two SR25 cardioid condenser mics for overheads, and one specially engineered SR20LS (low sensitivity) condenser mic for bass drum. The kit includes clips and pouches for each mic. All three microphones boast an impressive impulse response that will capture all the impact and detail of the attack. Their fast diaphragm settling time will reproduce low-level detail to provide the full expressiveness of a drummer’s performance, while the mic handles up to 145dB SPL, virtually eliminating overload distortion.

The core of your drum sound.

Overheads and kick are a wide-angle lens capturing the full picture of your drum kit. The vividness, realism and lifelikeness in that picture depend on two factors: the quality of the sounds captured by the individual microphones, and how seamlessly the sounds from those microphones blend together. The three-microphone DK3 kit redefines what’s possible in drum miking.

Picture Perfect

A perfect sonic image of your whole kit from above. A pair of Earthworks SR25 cardioids bring transparency, clarity, and attack to your drum sound.

Punch Through the Mix

Don’t be fooled by its size. The SR20LS is a revolution in bass drum miking. A small diaphragm condenser that goes all the way down to 20Hz and handles 150dB SPL, the SR20LS missing nothing and single handedly does a job that often requires two mics or more.

Your Sound

Your drums are your voice, and details matter. Laser-focused on delivering your sound, each microphone in the DK3 is engineered with razor-flat, extended frequency response and time coherence. Every detail, every nuance, and every texture flawlessly intact, making your drum sound come to life.

Speed Where You Need It

Most live performance microphones sacrifice sound quality with big heavy dynamic capsules that move too slowly to capture the subtle details in the attack and texture of drums and cymbals. Not the mics in the DK3. Small diaphragm condenser capsule coupled with a proprietary Class A amplifier circuit delivers sound that deeply connects the audience to the stage.

Build a Legacy

Precision machined from stainless steel, each microphone in the DK3 is a stunning instrument designed for your whole career, on the road and in the studio.

SR25 Specifications

  • Frequency Response: 20Hz -25kHz ±2dB at 12 inches (30cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 24-48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 65Ω balanced (between pins 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 20dB SPL equivalent (A weighted)
  • Dimensions: (L x D) 165mm x 22mm (6.5 x .860 inches)
  • Weight: .35 lb. (160g)

SR20LS Specifications

  • Frequency Response: 20Hz -20kHz
  • Polar Pattern: Cardioid
  • Sensitivity: 3mV/Pa (-50dBV/Pa)
  • Power Requirements: 24-48V Phantom, 10mA
  • Max Acoustic Input: 150dB SPL
  • Signal-to-Noise Ratio: 74dB A-weighted
  • Output: XLR (pin 2+)
  • Output Impedance: 200Ω balanced (between pins 2 & 3)
  • Min Output Load: 1000Ω between pins 2 & 3
  • Noise: 20dB SPL equivalent (A weighted)
  • Dimensions: (L x D) 192mm x 22mm (7.57 x .860 inches)
  • Weight: .36 lb. (164g)