PreSonus ULT12 - 2-Way 12" Active Sound-Reinforcement Loudspeaker
£999.09 ex. vat
PreSonus ULT12 - 2-Way 12" Active Sound-Reinforcement Loudspeaker
The PreSonus ULT12 active loudspeakers combine 1,300W of power and a proprietary, rotatable horn with extremely wide horizontal and focused vertical dispersion to deliver even coverage and an ultra-long throw making these speakers are great for both mobile use and permanent installations.
The ULT12’s custom-designed Pivot X110 rotatable horn combines ultra-wide horizontal coverage (110°) for broad coverage with focused vertical dispersion (50°) for superior throw. The result is a loudspeaker that can fill the room without introducing early reflections that muddy the sound. In addition, the Pivot X110 horn’s large size enables it to control the dispersion pattern lower in the frequency range than smaller conventional horns, so it maintains more consistent gain on- and off-axis, ensuring that the audience at the sides has the same listening experience as those in front. The result is sound reproduction that fills the entire room, evenly providing optimal audio.
Features
Main Components
- 12-inch custom woofer with 2.5-inch voice coil
- WorxAudio®-designed waveguide Pivot X110 horn for precise coverage
- Ultra-wide 110˚ horizontal dispersion
- Tight 50˚ vertical dispersion for longer throw
- 1,300W Class D power (150x500W continuous)
- XMAX preamp
- Onboard mixer with two combo XLR and ¼” inputs
- Direct line-input channel output
- Single summed balanced output
Controls
- Mic/Line Level
- Line/Level
- 3 operation mode presets
- FOH – normal live front of house
- DJ - Music playback
- Mon — stage wedge floor monitor
- HPF On/Off
- Front LED On/Off
Convenience Features
- Multi-angle enclosure for mains or monitor wedge application
- Defeatable front-panel LED
- Rugged, texture-painted eucalyptus plywood enclosures
- Tour-grade 16 gauge steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with 6˚ downward tilt
- Integrated M10 rigging points for suspended horizontal and vertical installation
- Locking IEC connection
Technical Specifications
Acoustic Performance
- Configuration: 2-way biamped
- Frequency Response (-3 dB): 55 Hz – 18 kHz
- Frequency Response (-10 dB): 50 Hz – 20 kHz
- Nominal Coverage (-6 dB): 110° x 50°
- Maximum Peak SPL: 135 dB
- Crossover Frequency: 1.6 kHz
Transducer
- LF Transducer 1x:12" Ferrite
- Voice Coil Diameter: 2.5”
- HF Transducer: 1.75" compression driver
Amplifier
- Type: Class D
- Total Power Output: 1,300W Peak (650 RMS)
- LF Power 1,000W Peak: (500W RMS)
- HF Power 300W Peak: (150W RMS)
- Cooling: Free air convection
- Rated THD: <0.05% (20 Hz - 20 kHz)
- Dynamic Range: 119 dB (A-weighted)
- Bandwidth: 20 Hz - 20 kHz
Connections and Controls
- Input Channels: 1 mic/line, 1 line
- Input Connector Types: 2 combo
- Mic Input Impedance: 1 kΩ
- Line Input Impedance: 10 kΩ
- Maximum Input: +22 dBu
- Output Connector: 2 XLR (M): Mix out, Direct out
- Controls Mic/Line Level
- Line/Level
- Preset Select
- HPF On/Off
- Front LED On/Off
- Indicators: DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal
DSP
- Presets: FOH, MON, DJ
- Polarity —
- HPF: 100 Hz, 4th-order Linkwitz-Riley
- Bit Depth: 24-bit
- Sample Rate: 96 kHz
Enclosure
- Material: Eucalyptus Plywood
- Finish: Chemline™ polyurethane
- Grille: Powder-coated steel
- Dimensions (HxWxD): 25.25” x 14” x 13.9” (641 mm x 356 mm x 353 mm)
- Unit Weight: 52 lbs. (23.6 kg)
- Handles: 2 (Top and Side)
- Monitor Angle: 30°
Safety
- Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
- Transducer Protection: limiter
Power
- AC Power Input: 100-230V~, 50-60 Hz
- AC Power Consumption: (1/8 Power) 150W
Suspension Mounting
- Rigging Points: 12 M10
- Mounting: 35 mm, 2-position