Sony UWP-D11 with DPA 4099V Instrument Mic Bundle

Sony UWP-D11 with DPA 4099V

This Sony and DPA bundle consists of the sony UWP-D11 belt-pack wireless transmitter, receiver and a DPA 4099 lavalier instrument microphone. The UWP-D11 belt-pack wireless microphone package offers the sound quality of digital audio processing combined with the reliability of analogue FM modulation, while the DPA 4099 allows you to achieve the purest reproduction of your instrument. The mics feature supercardioid polar patterns for superior gain-before-feedback. They offer extremely natural sound and are fully capable of handling the violin’s dynamic range and subtle details.

features

The package includes the UTX-B03 belt-pack transmitter and URX-P03 portable receiver. Also included is a high quality omni-directional lavalier microphone and a range of accessories including windscreen, microphone holder clip, belt-clip and shoe-mount adaptor.The UWP-D11 package offers wide frequency coverage with up to 72 MHz bandwidth (depending on region) across a wide range of channels, with a choice of models to choose from.

Known for their discreet size and elegance, these mics feature a lightweight design. Yet, d:vote™ 4099 Instrument Microphones are also rugged. The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument.

Specifications

URX-P03

• Oscillator Type: Crystal-controlled PLL Synthesizer
• Reception Type: Space diversity
• Antenna Type: 1/4 wave length wire
• Frequency Response: 23Hz to 18kHz (typical)
• Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
• Distortion (T.H.D): 0.9% or less (-60dBV, 1kHz input)
• Audio Delay: Approx. 0.35 msec
• Analog Output: 3-pole mini jack, unbalanced
• Analog Output Level: -60dBV (at ±5kHz deviation)
• Analog Output Adjust Range: -12dB - +12dB (3dB step)
• Headphone Output: φ3.5 mm ( 5/32 inch) stereo mini jack
• Headphone Output Level: Max. 10mW (at 16ohm load)
• Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
• Display: LCD
• Dimensions: 63 x 82 x 23.8mm (excluding the anntenas) (W x H x D)

UTX-B03

• Oscillator Type: Crystal-controlled PLL Synthesizer
• Antenna Type: 1/4 wave length wire
• Type of Emission: F3E
• Capsule Type: Electret condenser
• Directivity: Omni-directional
• Input Connector: 3-pole locking mini jack
• Reference Input Level:
• MIC: -60 dBV (at 0-dB attenuator level)
• LINE: +4 dBu
• Audio Attenuator Adjustment Range: 0 dB to 21 dB (in 3-dB steps): Mic input
• Frequency Response: Americas, Europe, UAE, South Africa, Australia, Malaysia, Vietnam, New Zealand: Transmission 23 Hz to 18 kHz (typical)
• Frequency Response: China, Thailand, Taiwan, Singapore, South Korea: Transmission 23 Hz to 18 kHz (typical)
• Frequency Response: Japan: Transmission 40 Hz to 15 kHz (typical)
• Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
• Audio Delay: Approx. 0.35 msec
• Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
• Display: LCD
• Dimensions: 63 x 82 x 20 mm (excluding the anntenas) (W x H x D)

DPA 4099

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ± 2 dB, at 20 cm (7.9 in): 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
• Total harmonic distortion (THD): < 1% up to 123 dB SPL peak
• Dynamic range: Typ. 100 dB
• Max. SPL, peak before clipping: 142 dB
• Output impedance: From MicroDot: 30 - 40 Ω. From DAD4099/DAD6001-BC: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD4099 or DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD4099 or DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter
• Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099 or DAD6001-BC XLR Adapter
• Connector: MicroDot
• Color: Black
• Weight: 41 g (1.4 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 45 mm (1.8 in)
• Cable length: 1.8 m (5.9 ft)
• Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Gooseneck length: 140 mm (5.5 in)