Studiocare Pro XLR Line output cable for Sennheiser EK Receivers (Sennheiser CL-100)

Studiocare Pro XLR Line output cable for Sennheiser EK Receivers (Sennheiser CL-100)

This Sennheiser mini to XLR Cable is for Sennheiser EK series receivers and features a locking mini jack that allows you to safely connect your mixer to your receiver kit. On the other end of the cable is a 3-pin male XLR cable so you can send your audio signal to the recording or distribution unit you are using.

Specifications

Klotz MY206

• Cond. construction: stranded bare copper, 28 x 0.10 mm
• Cond. cross section: 0.22 mm2
• Insulation: polyethylene (PE)
• Core arrangement: 2 cores + twisted cotton tracers
• Shielding: bare copper spiral shield
• Outer jacket: PVC, matt
• Overall diameter: 6.15 mm
• Min. bending radius: 30 mm
• Working temperature: -20°C / +70°C
• Conductor resistance: < 85 Ω/km
• Cond./cond.: 60 pF/m
• Cond./cond.: 110 pF/m
• Insulation resistance: > 0.1 GΩ x km

Neutrik NC3MXX-BAG

• Connection Type: XLR
• Gender: male
• Boot: Polyurethan
• Contact plating: 2 µm Ag
• Contacts: Brass (CuZn39Pb3)
• Insert: Polyamide (PA 6.6 30 % GR)
• Locking element: Zinc diecast (ZnAl4Cu1)
• Shell: Zinc diecast (ZnAl4Cu1)
• Shell plating: Black chromium
• Strain relief: Polyacetal (POM)
• Flammability: UL 94 HB
• Standard compliance: IEC 61076-2-103
• Protection class: IP 40
• Solderability: Complies with IEC 68-2-20
• Temperature range: -30 °C to +80 °C