Connectors

Beyer Dynamic Headphone Jack Adapter with M8 Screw Thread - for Units Manufactured before June 2019

Audinate Dante AVIO AES3 The Audinate Dante AVIO AES3 is a IO adapter that lets you use your favorite digital audio gear on a Dante audio network. ...

Audinate ADP-USB- AU-2X2 The Audinate DAO-AU-0X2 is a Dante AVIO USB Adapter that lets you connect any computer to a Dante audio network with zero ...

Audinate Dante AVIO Analogue Input Adaptor (2x0) The Audinate Dante AVIO Analog 2x0 lets you use analog audio line-level source gear you already ow...

Neutrik NA3MM - Male XLR to Male XLR Adapter The Neutrik NA3MM is a 3 pole XLR male to 3 pole XLR male circular gender conversion adapter. Versati...

Neutrik NA3FF - Female XLR to Female XLR Adapter The Neutrik NA3FF is a 3 pole female XLR to 3 pole female XLR circular gender conversion adapter. ...

Audinate DAO-AU-0X2 The Audinate DAO-AU-0X2 is a Dante AVIO Analog Output that lets you drive analog line-level products you already own from any D...

Phono to 1/4" Jack Plug Adaptor This adaptor allows you to connect a standard phono cable to a standard 6.5mm Mono Jack. Stereo signals are not com...

Neutrik NA3FP - Female XLR to Stereo 1/4" Jack Adapter The Neutrik NA3FP is a 3 pole XLR female to Stereo 1/4" plug (Tip, Ring, Sleeve contact) cir...

Neutrik NA3MP - Male XLR to Stereo 1/4" Jack Adapter The Neutrik NA3MP is a 3-pole XLR male to stereo 1/4" plug (Tip, Ring, Sleeve contact) adapter...

Neutrik NA3MJ Adapter The Neutrik NA3MJ is a XLR to jack adapter with 3 pole XLR male to a stereo 1/4" locking jack (TRS). This converter is a grea...

Neumann NDH Headphone Jack Adapter 6.3mm This is a replacement jack adapter for the Neumann NDH headphone range.  Headphones not included.

Audinate Dante AVIO Analogue Input Adaptor (1x0) The Audinate Dante AVIO Analog 1 lets you use analog audio line-level source gear you already own ...

Klotz AYB-1 The Klotz AYB-1 is a compact headphone distribution adapter with 1 x jack 6.35 mm feeding 2 x jack female 6.35 mm very flexible distri...

DPA DAD9034 - Adapter for Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless, Audio Ltd En2 TX An adapter that connects DPA headset microphones, D...

DPA DAD9010 - MicroLock to Mini-XLR TA4F Adapter for Shure, TOA and Line 6 systems An adapter that connects DPA headset microphones, DPA lavalier m...

Switchcraft Tini Q-G The Switchcraft Tini QG is a 3 pin connector (mini XLR). These connectors are perfect for location kits that require small lig...

Switchcraft AudioFix 3-way adaptor The Switchcraft AudioFix 3-way adaptor is a Male XLR to Female XLR with -20B attenuation circuit, ground lift fu...

DPA DAD9003 - Adapter for Sennheiser, Wisycom, Shure, Lectrosonics and Trantec systems An adapter that connects DPA headset microphones, DPA lavali...

DPA DAD9001 - Adapter: MicroLock to 3-pin XLR with Belt Clip A revamped adapter for powering miniature mics via standard P48 phantom power. Designe...

DPA DAD9099 - Adapter: MicroLock to XLR With Belt Clip & Low Cut A revamped MicroLock to 3-pin XLR Adapter featuring a low-cut roll-off filter ...

DPA DAD9033 - Adapter: Audio-Technica ATW-T1000 D/ATW-T310/AEW-T1000/ATW-T701 An adapter that connects DPA headset microphones, DPA lavalier microp...

DACS Audio Install RJ45 LINK 02/VOL 4.5mm x 36.5mm DACS on the RJ45 LINK 02: Send 4 balanced audio lines down one CAT5/6 cable. Again we recommend ...

DACS Audio Install RJ45 LINK 01/BT 44.5mm x 36.5mm DACS on the RJ45 LINK 01: Designed to work with the Ecler WPaBT Bluetooth receiver, this unit si...