Lewitt MTP 840 DM - Dynamic handheld microphone, supercardioid pattern, low-cut, switchable gain settings, microphone clip
£139.16 ex. vat
Lewitt MTP 840 DM - Dynamic handheld microphone
The Lewitt MTP 840 DM is a supercardioid, dynamic handheld microphone designed to make your vocals cut through the densest of live mixes. The microphone features the unique Active Mode which boosts sensitivity by up to 12dB, while the keeping the output impedance low. Pair this with the low-cut settings and you have a very powerful live, vocal microphone.
Features
- Dynamic vocal microphone
- Active mode to boost sensitivity
- Tailored vocal sound
- Low-cut settings
- Supercardioid pattern
Your mic to cut through the densest of live mixes.
The MTP 840 DM is a supercardioid handheld performance microphone. Its tailored frequency response ensures that your vocals will cut through every mix. The unique Active Mode boosts sensitivity by up to 12 dB while output impedance stays low.
Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.
Give your signal some extra gain.
Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.
Plug in and rock. No EQ required.
We tailored the frequency response to make your vocals cut through even the densest mix, with great presence and clarity.
Plus, you do not require an EQ to be heard. Just plug it in and perform.
Improve clarity.
Remove the mesh, and you'll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.
Be fully protected against feedback.
The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice - side and rear sounds are effectively rejected.
Specifications
- Type: Dynamic, moving coil
- Acoustical operating principle: Pressure gradient transducer
- Polar pattern: Supercardioid
- Sensitivity: 3.5 mV/Pa, -49 dBV/Pa
- Signal / noise ratio: 75 dB (A)
- Self-noise: 19 dB (A)
- Dynamic range, passive mode: 135 dB
- Dynamic range, active mode
- 121 dB, 0 dB gain
- 115 dB, 6 dB gain
- 109 dB, 12 dB gain
- Gain settings, active mode: 0 dB, 6 dB, 12 dB
- Low-cut filter: linear
- 150 Hz (12 dB/oct)
- 250 Hz (12 dB/oct)
- Internal impedance: 600 Ω
- Supply voltage: 48 V ± 4 V
- Current consumption: 5.5 mA
- Connector: Gold plated 3-pin XLR
- Microphone dimensions: 51 dia. x 183 mm, 2 dia. x 7.2 in
- Microphone net weight: 336 g, 11.85 oz