PMC 8-2 SUB-R Active sub with 2 x 8 inch bass units for use as dedicated sub or to complete the Right channel of a 6-2 or 8-2 XBD system.

PMC 8-2 SUB-R Active sub with 2 x 8 inch bass units 

The  The PMC8-2 SUB is a larger subwoofer for full-bandwidth, high-resolution reference monitoring in the most demanding professional environments. The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.

With the same dimensions as the PMC8-2 midfield monitor, the PMC8-2 SUB’s twin eight-inch bass drivers are powered by independent 400W Class-D amplifiers. The same configuration options are available as on the PMC8 SUB, likewise accessible on the speaker’s rear panel or by using the browser-based SoundAlign™ software via a LAN-connected tablet, smartphone or computer.

The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD cabinet with either PMC6-2 or PMC8-2 s, creating a system of awesome power and dynamic range. The sub is available in either left- or right-handed cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on the outside edges of a stereo array, matching the arrangement of the main monitors.

This is a right-handed cabinet.

Features

• Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
• Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
• Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half space measurement.
  Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
• State-of-the-art Class-D amplifier: 2 x 400W
• Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
• Digital ‘through’ output (AES3 24-bit, 96kHz)
• SoundAlign™ network control interface for single or group EQ & settings
• Sophisticated DSP driver protection, EQ, and delay/phase options
• Dedicated XBD configuration mode

Specifications

• Type: Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
• Drive Unit Complement:
• LF PMC 200mm (8”) studio 8 driver
• Effective ATL™ Length: 3m (9.8ft)
• Frequency Response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
• Sensitivity: +4dBu input signal = 98dB SPL @ 1m
• Max continuous SPL: 115dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
• Max Peak SPL: 121dB @1m, (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
• Input:
• XLR switchable between analogue & digital AES3
• Analogue input
• - +20/+24dBu max. input level (selectable)
• - 22K ohm input impedance
• Digital input
• - 16/24-bit AES3 signal, left, right or left + right
• - 18 - 192kHz Sample Rate- 110 ohm input impedance
• Expansion card slot
• - For future connectivity upgrades
• Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
• Network: RJ45 for use with PMC SoundAlign web interface
• Features:
• Level Trim: (+/-10dB)
• High-pass/Low-pass filter: (20 - 200Hz, 12dB/Oct)
• Delay: (0 - 30mS)
• Phase: (normal or inverted)
• LF & HF shelving filters: (20Hz - 20kHz, +/- 10dB, Q 0.707)
• Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)
• User presets: (3 + factory defaults)
• Latency: 2.4mS
• Amplifier power per channel: 300Wrms
• Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
• Power consumption (idle): 25W
• Power consumption (max): 300W
• Cabinet dimensions:
• H 266mm (10.5”)
• W 551mm (21.7”)
• D 440mm (17.3”)
• Weight: 18.5kg (40.8lbs) each