Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Blackmagic Design ATEM Studio Converter 2

£1,996.50 inc. vat
£1,663.75 ex. vat
SKU SBLMSWRCONVRCK2
Usually Ships in 1-3 Business Days.

Blackmagic Design ATEM Studio Converter 2

The Blackmagic Design Studio Converter 2 is a converter that takes SDI video signals via optical fiber and converts the signals to SDI so that they can be used with video switchers. When the Studio Converter 2 is used with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables.

Specifications

SDI Video Input

  • 4 x 10 bit SD/HD switchable camera inputs 
  • 1 x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in the SDI signal
  • SDI Compliance: SMPTE 259M, SMPTE 292M
  • Video Sampling: 4:2:2
  • Color Precision: 10-bit
  • Color Space: REC 601, REC 709

Optical Fiber Video Input

  • 4 x single mode SD/HD switchable camera inputs with LC connector
  • Optical Fiber Input
  • 4 x single mode LC connectors for video with embedded audio
  • Channels 1 & 2 are camera audio 
  • Channels 15 & 16 are talkback audio

Optical Fiber Video Output

  • 4 x single mode LC connectors for video with embedded audio
  • Channels 1 & 2 are camera audio 
  • Channels 15 & 16 are talkback audio

OS Compatibility

  • Mac: OS X 10.7 Lion and later, OS X 10.8 Mountain Lion and later
  • Windows: Windows 7, Windows 8

Computer Interface

  • 1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control
  • Temperature Operating: 32 to 104°F (0 to 40°C)
  • Temperature Storage: -4 to 113°F (-20 to 45°C)

Audio

  • Audio Sampling: 48 KHz, 24-bit A/D conversion
  • Analog Audio Output: 4 x 3-Pin XLR Balanced Audio Pairs (1 x pair per fiber input), 2 x RCA jacks provide a L/R stereo pair
  • Talkback: 1 x 1/4" TRS headphone jack, 1 x .206" TRS mic input for use with aviation style headset, 1 x 3-pin XLR connector for talkback microphone, 1 x integrated speaker
  • Talkback Control: 8 x Front panel buttons for camera operator selection, lock, mute and un-mute
  • AES/EBU Talkback Loops Input: 1 x BNC mic input, 1 x BNC headphone input
  • AES/EBU Talkback Loops Output: 1 x BNC mic output, 1 x BNC headphone output

Power Requirements

  • 110 - 220V AC, 50/60 Hz
  • 12 - 31 V DC redundant input
  • Note: IEC powercord is required/not included, redundant power supply not included
  • Dimensions: (H x W) 1.7 x 18.9" (44 x 482 mm)
  • Weight: 4 lb (1.81 kg)