DACS Audio Install SPLIT 48mm x 26mm
DACS on the SPLIT:
Passive splitting of 1 balanced input to 4 balanced outs. We use these on the rear of amp racks for simple signal distribution. You can easily check the amps by removing the 3-way terminals in sequence.
Further:
DACS have been designing and installing audio systems for over 25 years now. Things that would make our life easier just weren’t available; some came close but usually did other things too and had a very high price tag. Each install was different, and the clients’ needs were sometimes complicated in terms of signal routing. We ended up producing a lot of custom interfaces, some passive, some active. Their basic elements form the initial DACS Install passive interfaces.
DACS Install PCBs use 3 pole 3.5mm Phoenix type connectors for all audio connections. Each pin of each terminal can be individually checked, and the 3-way terminals can be removed/swopped for troubleshooting. Other connections for power and control ports are on two ways or a DC socket (central pin +ve).
The common audio 0V connects to all audio 0V/screens. When using balanced signals, it’s simple to ‘lift’ either the incoming or outgoing screen. We tend to lift the outgoing screen – “signal in – screen in, signal out – screen out” is easy to remember! The power 0V is NOT linked to the audio 0V.
The PCBs can be DIN rail mounted (with the optional Hammond DIN Rail clips) or housed in plastic or metal enclosures.