Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

DPA d:dicate™ 4017B Shotgun Mic

£1,314.00 inc. vat
£1,095.00 ex. vat
SKU SDPA4017
Please contact us for availability.

DPA d:dicate™ 4017B Shotgun Mic

The DPA d:dicate 4017B is a supercardioid shotgun mic intened for broadcast, location, production and studio applications. With a highly directional pick-up pattern paired with an interference tube that rejects off axis and side spill, the 4017B is a lightweight, accurate and focused mic that performs with neutral clarity.

The 4017B has been designed to tune out rear and side sound spill. The capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications and is full RF frequency immune. For extended sonic control, the 4017B has two adjustable high pass filters at 120Hz and 50Hz and a high frequency +4dB shelf at 8kHz, easily adjustable from the on body ring switches.

DPA 4017B Features

  • short and exceptionally lightweight
  • neutral and accurate
  • designed for booming in film and TV
  • extensive dynamic range

Specifications

  • Directional characteristics: Supercardioid, lobe-shaped
  • Principle of operation: Pressure gradient, with interference tube
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Sensitivity, nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 80 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak
  • Dynamic range: Typ. 119 dB
  • Max. SPL, peak before clipping: 138 dB
  • Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
  • Output impedance: < 150 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Signal balanced
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power supply: 48 V Phantom power (± 4 V)
  • Current consumption: 4.5 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
  • Color: Matte black
  • Weight: 68 g (2.4 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Capsule diameter: 19 mm (0.75 in)
  • Microphone length: 212 mm (8.3 in)
  • Output voltage, RMS: > 1.8 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %