Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

DPA ST2006A - d:dicate™ 2006A Stereo Pair with Clips and Windscreens in Peli Case

£1,758.00 inc. vat
£1,465.00 ex. vat
SKU SDPAST2006A
Usually Ships within 48 hours.

DPA ST2006A - d:dicate 2006A Pair

The DPA d:dicate ST2006A Stereo Pair is a twin diaphragm omni-directional condenser microphone kit. Based on DPA's popular 4006 omni mic, the 2006 shares much of the same design ethos and performance from the 4000 line, but is available at a more affordable price for price concious customers.

The DPA 2006A features two opposite facing diaphragms, which are rebuilt into a single capsule composition. This means the mic has the advantages of a small capsule, with a fast impulse response and a large frequency bandwidth, but has lower inherent noise thanks to its larger overall diaphragm surface area.

The mic is also of a modular design, meaning it’s easy to swap out the capsule to change the pick-up pattern. It's omni design and high frequency response means it's great as an ambient room mic, as a single overhead for a drum kit, choirs, acoustic instruments and other uses. 

The DPA ST2006A is a complete stereo Pair with two hand picked omni microphones, selected on sensitivity within ±1.5 dB.

DPA 2006A Stereo Pair Features

    • Sensitivity selected pair
    • Acoustic authenticity
    • Linear in a large frequency bandwidth
    • PeliTM Case transportation and protection

    DPA 2006A Specifications

    • Directional pattern: Omnidirectional
    • Principle of operation: Pressure
    • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
    • Frequency range: 20 Hz to 20 kHz
    • Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
    • Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
    • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
    • Minimum load impedance: 2 kohm
    • Dynamic range: Typ. 114 dB
    • Max. SPL, peak before clipping: 141 dB
    • Switchable attenuator: 0 dB / -20 dB
    • Output impedance: < 200 ohm
    • Cable drive capability: 100 m (328 ft)
    • Output balance principle: Impedance balancing with Active Drive
    • Common Mode Rejection Ratio (CMRR): > 60 dB
    • Power supply (for full specifications): 48 V Phantom power (± 4 V)
    • Current consumption: 2.8 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • Color: Matte black
    • Microphone weight: 160 g (5.6 oz)
    • Microphone diameter: 19 mm (0.75 in)
    • Microphone length: 164 mm (6.5 in)
    • Output voltage, RMS: > 5 V
    • Polarity: +V at Pin 2 for positive sound pressure
    • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
    • Relative Humidity (RH): Up to 90%