Electro-Voice RE27N/D Variable-D Dynamic Cardioid Microphone

Electro-Voice RE27N/D Variable-D Dynamic Cardioid Microphone

The Electro-Voice RE27N/D is a neodymium Variable-D dynamic cardioid built for broadcast announce, voice-over, podcasting and high-SPL instrument work. It keeps the familiar RE-series handling of proximity effect while delivering higher output and extended top end versus a standard dynamic design — without phantom power.

Three on-body voice-shaping switches let you set two bass roll-off options and a high-frequency cut at the mic, so you can tailor the tone before it hits the preamp. An integral blast filter, internal element shock mounting and a hum-bucking coil help keep plosives, handling noise and magnetically induced hum under control in busy studios and booths.

Features

• Neodymium magnet structure for higher output (up to about 6 dB vs a conventional design)
• Continuously Variable-D design for stable tone as working distance changes
• True cardioid pattern with strong rear rejection
• Three voice-shaping switches: two bass roll-offs plus high-frequency cut
• Integral blast / wind filter and internal shock mounting
• Hum-bucking coil and steel case for EMI / hum rejection
• No phantom power required; handles high SPLs without condenser overload behaviour
• Suited to voice-over, broadcast, kick drum, brass and bass cabinets

Included

• Electro-Voice RE27N/D microphone
• 81715 stand clamp
• Storage box

Specifications

• Element: Dynamic, N/DYM magnet structure
• Polar pattern: Cardioid
• Frequency response: 45 Hz – 20,000 Hz
• Impedance: 150 ohms balanced
• Sensitivity (open circuit, 1 kHz): 2.52 mV/pascal
• Connector: 3-pin XLR
• Case material: Steel
• Finish: Satin nickel
• Dimensions: Length 216.7 mm (8.53 in); widest diameter 54.4 mm (2.14 in); body diameter 49.2 mm (1.94 in)
• Net weight: approx. 737 g (1 lb 10 oz)